new

Get trending papers in your email inbox!

Subscribe

Daily Papers

byAK and the research community

Nov 18

The Harness as the Only Mutable Surface: Compliance-Bounded Self-Evolution of LLM Agents in Credit Pipelines, with a Measured Admission Gate

Self-improving LLM agents can adapt a credit pipeline to a changed rule, but an agent that rewrites itself destroys the artefact a supervisor reviews: a named change, a recorded test, an approval. We argue that self-evolution is reviewable only if it is confined to the runtime harness (instruction text, tool-call logic and primitive composition) while model weights stay fixed, so that every adaptation is a diff with a cause and a test attached. We give a dual-loop engine built on that bound, with one admission gate that writes a hash-chained record before deployment, and we measure the gate in simulation, with a simulated agent and a seeded-search proposer rather than language models. Across three families of supervisory re-interpretation at three severities, 10 seeds each, the gated loop admitted 144 of 7,449 candidate changes, none of which worsened error on held-out history, and restored the false-positive rate to the oracle level without raising missed flags in every low- and mid-severity cell. With the gate replaced by the check an unbounded system applies (fewer errors visible in recent traces), the same loops admitted 309 harmful changes and left missed flags above 10% in 49 of 90 runs: false positives fell because the screen was loosened. Evaluated on pre-shift labels, the gate rejected every candidate, so a re-interpretation must be encoded as a rule that relabels history. Parametric and scope shifts were repaired locally, a structural one only by primitive replacement; at the highest structural severity the gate's fixed tolerance blocked the correct replacement in half the seeds. We map the mechanisms to the EU AI Act's provisions for high-risk credit scoring and note that the April 2026 US model-risk guidance excludes agentic AI from its scope.

  • 1 authors
·
Oct 6

Mastermind: Strategy-grounded Learning for Repository-Scale Vulnerability Reproduction

Repository-level vulnerability reproduction is a demanding software engineering (SE) task: an agent must inspect a codebase, infer the input grammar that reaches a vulnerable path, construct a proof-of-conceptv(PoC), and verify that the crash disappears on the patched build. Recent LLM agents can often execute these steps when the approach is correct, yet they still fail by choosing the wrong strategy. This paper argues that strategy, rather than the full action trajectory, is the right learning unit for such SE agents: it is compact enough to optimize, concrete enough to guide execution, and stable enough to store and reuse across attempts. We present Mastermind, a dual-loop framework that separates transferable strategy learning from task-specific experience. A trainable planner learns reusable vulnerability-reproduction strategies through SFT and milestone-based GRPO, while an experience loop maintains task-local strategy records that guide subsequent attempts. The planner is trained independently of the executor, allowing strategy learning to improve multiple frozen executors without modifying their action-generation capability. We evaluate Mastermind on CyberGym using 260 training tasks and 200 held-out evaluation tasks. With GPT-5.5 as the frozen executor, Mastermind achieves an 84.5% pass rate, outperforming open-book PoC context (60.0%), Best-of-8 sampling (63.0%), and iterative improvement (77.0%). The same planner also improves GPT-5.4 mini and GLM~5.1 from 45.0% and 58.5% to 60.0% and 71.0%. These results demonstrate that learning high-level strategies is an effective and transferable mechanism for improving repository-scale SE agents.

  • 7 authors
·
Jul 1 2

TAMEn: Tactile-Aware Manipulation Engine for Closed-Loop Data Collection in Contact-Rich Tasks

Handheld paradigms offer an efficient and intuitive way for collecting large-scale demonstration of robot manipulation. However, achieving contact-rich bimanual manipulation through these methods remains a pivotal challenge, which is substantially hindered by hardware adaptability and data efficacy. Prior hardware designs remain gripper-specific and often face a trade-off between tracking precision and portability. Furthermore, the lack of online feasibility checking during demonstration leads to poor replayability. More importantly, existing handheld setups struggle to collect interactive recovery data during robot execution, lacking the authentic tactile information necessary for robust policy refinement. To bridge these gaps, we present TAMEn, a tactile-aware manipulation engine for closed-loop data collection in contact-rich tasks. Our system features a cross-morphology wearable interface that enables rapid adaptation across heterogeneous grippers. To balance data quality and environmental diversity, we implement a dual-modal acquisition pipeline: a precision mode leveraging motion capture for high-fidelity demonstrations, and a portable mode utilizing VR-based tracking for in-the-wild acquisition and tactile-visualized recovery teleoperation. Building on this hardware, we unify large-scale tactile pretraining, task-specific bimanual demonstrations, and human-in-the-loop recovery data into a pyramid-structured data regime, enabling closed-loop policy refinement. Experiments show that our feasibility-aware pipeline significantly improves demonstration replayability, and that the proposed visuo-tactile learning framework increases task success rates from 34% to 75% across diverse bimanual manipulation tasks. We further open-source the hardware and dataset to facilitate reproducibility and support research in visuo-tactile manipulation.

  • 9 authors
·
Apr 7

Scientific Graphics Program Synthesis via Dual Self-Consistency Reinforcement Learning

Graphics Program Synthesis is pivotal for interpreting and editing visual data, effectively facilitating the reverse-engineering of static visuals into editable TikZ code. While TikZ is the de facto standard for scientific schematics due to its programmatic flexibility, its requirement for rigorous spatial precision presents a significant challenge for Multimodal Large Language Models. Progress is currently stifled by two primary gaps: (1) Data Quality Gap: existing image-TikZ corpora often lack strict executability and reliable visual alignment; (2) Evaluation Gap: a lack of benchmarks for both structural and visual fidelity. To address these, we present a closed-loop framework featuring: SciTikZ-230K, a large-scale, high-quality dataset from our Execution-Centric Data Engine covering 11 diverse scientific disciplines; SciTikZ-Bench, a multifaceted benchmark spanning from basic geometric constructs to intricate hierarchical schematics to evaluate both visual fidelity and structural logic. To further broaden the scope of visual-code optimization methodology, we introduce a novel Dual Self-Consistency Reinforcement Learning optimization paradigm, which utilizes Round-Trip Verification to penalize degenerate code and boost overall self-consistency. Empowered by these, our trained model SciTikZer-8B achieves state-of-the-art performance, consistently outperforming proprietary giants like Gemini-2.5-Pro and massive models like Qwen3-VL-235B-A22B-Instruct.

  • 9 authors
·
Apr 6 1

ETA: Efficiency through Thinking Ahead, A Dual Approach to Self-Driving with Large Models

How can we benefit from large models without sacrificing inference speed, a common dilemma in self-driving systems? A prevalent solution is a dual-system architecture, employing a small model for rapid, reactive decisions and a larger model for slower but more informative analyses. Existing dual-system designs often implement parallel architectures where inference is either directly conducted using the large model at each current frame or retrieved from previously stored inference results. However, these works still struggle to enable large models for a timely response to every online frame. Our key insight is to shift intensive computations of the current frame to previous time steps and perform a batch inference of multiple time steps to make large models respond promptly to each time step. To achieve the shifting, we introduce Efficiency through Thinking Ahead (ETA), an asynchronous system designed to: (1) propagate informative features from the past to the current frame using future predictions from the large model, (2) extract current frame features using a small model for real-time responsiveness, and (3) integrate these dual features via an action mask mechanism that emphasizes action-critical image regions. Evaluated on the Bench2Drive CARLA Leaderboard-v2 benchmark, ETA advances state-of-the-art performance by 8% with a driving score of 69.53 while maintaining a near-real-time inference speed at 50 ms.

  • 5 authors
·
Jun 8, 2025

LoopCoder-v2: Only Loop Once for Efficient Test-Time Computation Scaling

Looped Transformers scale latent computation by repeatedly applying shared blocks, but sequential looping increases latency and KV-cache memory with the loop count. Parallel loop Transformers (PLT) alleviate this cost through cross-loop position offsets (CLP) and shared-KV gated sliding-window attention, making loop count a practical design choice. We therefore study PLT loop-count selection through a gain--cost view: an extra loop may refine representations, but CLP also introduces a positional mismatch at each loop boundary. We instantiate this study by training LoopCoder-v2, a family of 7B PLT coders with different loop counts, from scratch on 18T tokens, followed by matched instruction tuning and evaluation. Empirically, the two-loop variant delivers broad gains over the non-looped baseline across code generation, code reasoning, agentic software engineering, and tool-use benchmarks, improving SWE-bench Verified from 43.0 to 64.4 points and Multi-SWE from 14.0 to 31.0 points. In contrast, variants with three or more loops regress, revealing a strongly non-monotonic loop-count effect. Our diagnostics show that loop 2 provides the main productive refinement, while later loops yield diminishing, oscillatory updates and reduced representational diversity. Because the CLP-induced mismatch remains roughly fixed as refinement gains shrink, the offset cost increasingly dominates. This gain--cost trade-off explains PLT's saturation at two loops and provides diagnostics for loop-count selection.

  • 19 authors
·
Jun 15 4

Looping Beyond Twice: A Scalable Recipe for Looped Mixture-of-Experts

Looped Transformers introduce recurrent depth as a new scaling axis for LLMs: by repeatedly applying shared Transformer blocks, they increase effective depth without increasing parameter count. However, the benefits of looping remain unclear for large MoE LLMs under FLOPs-matched comparisons. The main reason is that the gains from additional iterations diminish quickly and can even turn into degradation, so the extra FLOPs spent on looping yield little substantial improvement. Consequently, prior work typically settles on two loops. We identify two main obstacles to scaling looped MoE. First, looping inherits and amplifies the curse of depth: hidden-state variance grows with each iteration as residual updates accumulate, which destabilizes deep recurrence and causes representations to drift. Second, looped MoE suffers from expert selection collapse: routers repeatedly select the same experts across loops, so extra iterations add computation without adding computational diversity. Guided by this diagnosis, we propose LOOM, built on a single principle: each loop should contribute new computation while keeping the recurrent state stable. LOOM stabilizes recurrence by scaling residual updates to bound variance growth and re-injecting the input embedding at every loop, and diversifies it through per-loop routers that engage different experts and a Looping Residual that carries earlier outputs forward. Experiments across 100M-1.7B models show stable scaling to 9-12 loops. Under near-iso-FLOP, the 700M model performs best at 5 loops, reducing perplexity from 18.36 to 16.54 and improving average zero-shot accuracy from 38.84% to 39.53% over the non-looped baseline. Without FLOP matching, the 1.7B model trained on 60B tokens peaks at 9 loops, reducing perplexity from 9.62 to 7.77 and improving average zero-shot accuracy from 42.4% to 47.7%. Code is available https://github.com/hed-ucas/LOOM.

A Dual-Loop Agent Framework for Automated Vulnerability Reproduction

Automated vulnerability reproduction from CVE descriptions requires generating executable Proof-of-Concept (PoC) exploits and validating them in target environments. This process is critical in software security research and practice, yet remains time-consuming and demands specialized expertise when performed manually. While LLM agents show promise for automating this task, existing approaches often conflate exploring attack directions with fixing implementation details, which leads to unproductive debugging loops when reproduction fails. To address this, we propose CVE2PoC, an LLM-based dual-loop agent framework following a plan-execute-evaluate paradigm. The Strategic Planner analyzes vulnerability semantics and target code to produce structured attack plans. The Tactical Executor generates PoC code and validates it through progressive verification. The Adaptive Refiner evaluates execution results and routes failures to different loops: the Tactical Loop for code-level refinement, while the Strategic Loop for attack strategy replanning. This dual-loop design enables the framework to escape ineffective debugging by matching remediation to failure type. Evaluation on two benchmarks covering 617 real-world vulnerabilities demonstrates that CVE2PoC achieves 82.9% and 54.3% reproduction success rates on SecBench.js and PatchEval, respectively, outperforming the best baseline by 11.3% and 20.4%. Human evaluation confirms that generated PoCs achieve comparable code quality to human-written exploits in readability and reusability.

  • 5 authors
·
Feb 7

Bilevel Autoresearch: Meta-Autoresearching Itself

If autoresearch is itself a form of research, then autoresearch can be applied to research itself. We present Bilevel Autoresearch, a bilevel framework in which an outer autoresearch loop improves an inner autoresearch loop by reading its code and traces, identifying bottlenecks, and generating injectable Python search mechanisms at runtime. The inner loop optimizes task performance; the outer loop optimizes how the inner loop searches. Both loops use the same LLM, so improvements come from the bilevel architecture rather than a stronger meta-level model, although the outer loop consumes additional inference and wall-clock budget. On Karpathy's GPT pretraining benchmark, the meta-autoresearch outer loop achieves a 5x improvement over the standard inner loop alone (-0.045 vs. -0.009 val_bpb), while parameter-level adjustment without mechanism change yields no reliable gain. The outer loop instantiates mechanisms from adjacent search domains, including combinatorial optimization, multi-armed bandits, and design of experiments, without human specification of the final mechanism design. Trace analysis suggests that these mechanisms break deterministic search patterns and force exploration of directions the LLM's priors avoid. The experiments demonstrate, on this benchmark, a first bilevel step: an outer loop improves the search behavior of an inner loop. Code is the mechanism carrier in this implementation, but skills, prompts, workflows, evaluators, domain principles, world-model assumptions, and memory schemas can also encode mechanisms that shape future agent behavior. This suggests a path toward recursive bootstrapping, where mechanisms discovered for the inner loop can be fed back to improve the meta-level loop itself.

  • 2 authors
·
Jun 1

Dual RL: Unification and New Methods for Reinforcement and Imitation Learning

The goal of reinforcement learning (RL) is to find a policy that maximizes the expected cumulative return. It has been shown that this objective can be represented as an optimization problem of state-action visitation distribution under linear constraints. The dual problem of this formulation, which we refer to as dual RL, is unconstrained and easier to optimize. In this work, we first cast several state-of-the-art offline RL and offline imitation learning (IL) algorithms as instances of dual RL approaches with shared structures. Such unification allows us to identify the root cause of the shortcomings of prior methods. For offline IL, our analysis shows that prior methods are based on a restrictive coverage assumption that greatly limits their performance in practice. To fix this limitation, we propose a new discriminator-free method ReCOIL that learns to imitate from arbitrary off-policy data to obtain near-expert performance. For offline RL, our analysis frames a recent offline RL method XQL in the dual framework, and we further propose a new method f-DVL that provides alternative choices to the Gumbel regression loss that fixes the known training instability issue of XQL. The performance improvements by both of our proposed methods, ReCOIL and f-DVL, in IL and RL are validated on an extensive suite of simulated robot locomotion and manipulation tasks. Project code and details can be found at this https://hari-sikchi.github.io/dual-rl.

  • 4 authors
·
Feb 16, 2023

StepORLM: A Self-Evolving Framework With Generative Process Supervision For Operations Research Language Models

Large Language Models (LLMs) have shown promising capabilities for solving Operations Research (OR) problems. While reinforcement learning serves as a powerful paradigm for LLM training on OR problems, existing works generally face two key limitations. First, outcome reward suffers from the credit assignment problem, where correct final answers can reinforce flawed reasoning. Second, conventional discriminative process supervision is myopic, failing to evaluate the interdependent steps of OR modeling holistically. To this end, we introduce StepORLM, a novel self-evolving framework with generative process supervision. At its core, StepORLM features a co-evolutionary loop where a policy model and a generative process reward model (GenPRM) iteratively improve on each other. This loop is driven by a dual-feedback mechanism: definitive, outcome-based verification from an external solver, and nuanced, holistic process evaluation from the GenPRM. The combined signal is used to align the policy via Weighted Direct Preference Optimization (W-DPO) and simultaneously refine the GenPRM. Our resulting 8B-parameter StepORLM establishes a new state-of-the-art across six benchmarks, significantly outperforming vastly larger generalist models, agentic methods, and specialized baselines. Moreover, the co-evolved GenPRM is able to act as a powerful and universally applicable process verifier, substantially boosting the inference scaling performance of both our own model and other existing LLMs.

  • 4 authors
·
Sep 26, 2025

Dualformer: Controllable Fast and Slow Thinking by Learning with Randomized Reasoning Traces

In human cognition theory, human thinking is governed by two systems: the fast and intuitive System 1 and the slower but more deliberative System 2. Recent studies have shown that incorporating System 2 process into Transformers including large language models (LLMs), significantly enhances their reasoning capabilities. Nevertheless, models that purely resemble System 2 thinking require substantially higher computational costs and are much slower to respond. To address this challenge, we present Dualformer, a single Transformer model that seamlessly integrates both the fast and slow reasoning modes. Dualformer is obtained by training on data with randomized reasoning traces, where different parts of the traces are dropped during training. The dropping strategies are specifically tailored according to the trace structure, analogous to analyzing our thinking process and creating shortcuts with patterns. At inference time, our model can be configured to output only the solutions (fast mode) or both the reasoning chain and the final solution (slow mode), or automatically decide which mode to engage (auto mode). In all cases, Dualformer outperforms the corresponding baseline models in both performance and computational efficiency: (1) in slow mode, Dualformer optimally solves unseen 30 x 30 maze navigation tasks 97.6% of the time, surpassing the Searchformer (trained on data with complete reasoning traces) baseline performance of 93.3%, while only using 45.5% fewer reasoning steps; (2) in fast mode, Dualformer completes those tasks with an 80% optimal rate, significantly outperforming the Solution-Only model (trained on solution-only data), which has an optimal rate of only 30%. For math problems, our techniques have also achieved improved performance with LLM fine-tuning, showing its generalization beyond task-specific models.

  • 5 authors
·
Oct 13, 2024

LoopMoE: Unifying Iterative Computation with Mixture-of-Experts for Language Modeling

Mixture-of-Experts (MoE) and looped architectures scale models along two orthogonal axes, namely parameter capacity and effective depth. However, mainstream looped architectures rely on dense backbones that couple parameter count with per-token FLOPs, which makes it impossible to isolate the effect of iterative computation under matched budgets. To this end, we present LoopMoE, a looped MoE language model that integrates sparse routing with iterative weight-shared computation through two designs. The first is IterAdaLN, which resolves weight-sharing symmetry via a modulation signal jointly conditioned on the iteration index and the per-token hidden state. The second is a capacity-balancing strategy that recovers the attention-to-FFN active parameter ratio of well-tuned non-looped references. Together, these designs enable the first strictly controlled, head-to-head evaluation of a looped MoE against a Vanilla MoE under identical total parameters, per-token FLOPs, and active sublayer ratios. At the 3B scale, LoopMoE outperforms the Vanilla MoE on 8 of 9 downstream benchmarks with an average improvement exceeding 1 point. At the 9B scale, LoopMoE continues to outperform the matched Vanilla MoE, indicating that the architectural gain persists at larger scale. Our work establishes a controlled synthesis of sparsity and recurrence, and suggests a promising direction for looped language models.

  • 6 authors
·
Jun 2

Real-Time Prediction of Gas Flow Dynamics in Diesel Engines using a Deep Neural Operator Framework

We develop a data-driven deep neural operator framework to approximate multiple output states for a diesel engine and generate real-time predictions with reasonable accuracy. As emission norms become more stringent, the need for fast and accurate models that enable analysis of system behavior have become an essential requirement for system development. The fast transient processes involved in the operation of a combustion engine make it difficult to develop accurate physics-based models for such systems. As an alternative to physics based models, we develop an operator-based regression model (DeepONet) to learn the relevant output states for a mean-value gas flow engine model using the engine operating conditions as input variables. We have adopted a mean-value model as a benchmark for comparison, simulated using Simulink. The developed approach necessitates using the initial conditions of the output states to predict the accurate sequence over the temporal domain. To this end, a sequence-to-sequence approach is embedded into the proposed framework. The accuracy of the model is evaluated by comparing the prediction output to ground truth generated from Simulink model. The maximum mathcal L_2 relative error observed was approximately 6.5%. The sensitivity of the DeepONet model is evaluated under simulated noise conditions and the model shows relatively low sensitivity to noise. The uncertainty in model prediction is further assessed by using a mean ensemble approach. The worst-case error at the (mu + 2sigma) boundary was found to be 12%. The proposed framework provides the ability to predict output states in real-time and enables data-driven learning of complex input-output operator mapping. As a result, this model can be applied during initial development stages, where accurate models may not be available.

  • 4 authors
·
Apr 2, 2023

Looped Diffusion Transformer

Improving text-to-image models has traditionally relied on increasing model size or the number of denoising steps. In this work, we explore an alternative way to scale computation by repeatedly running shared Transformer blocks within each denoising step, effectively increasing computational depth while keeping the parameter count fixed. This looped computation enables iterative refinement of internal representations without explicit reasoning tokens. However, naive looping fails to consistently improve image quality. We trace this problem to weak supervision across intermediate loops and unregulated attention updates that progressively erode local information. To overcome these challenges, we propose Looped Diffusion Transformer (Looped-DiT), which combines deep supervision across intermediate loops with self-modulating attention to stabilize looped feature updates. Under matched-parameter and matched-compute settings, Looped-DiT consistently outperforms non-looped baselines. Notably, a 260M-parameter looped model can surpass a model 6.5x larger across multiple text-to-image benchmarks while requiring 4.9x lower inference compute. Beyond this performance gain, we find that looped computation can offer a more effective form of iterative computation for diffusion models, with increasing loop depth yielding larger gains than adding more denoising steps under a fixed inference budget. Furthermore, deeper loops can progressively correct mistakes made in earlier loops, exhibiting behaviors suggestive of latent reasoning. Together, these results show that looped computation offers a promising way to scale visual generation models.

  • 10 authors
·
Sep 29

RecurTrace: Adaptive Latent Reasoning with Loop-Time Memory

Repeating a small block of middle layers increases a language model's effective inference depth without adding parameters or generating extra tokens, and recent work shows that this latent recurrence improves reasoning. However, two design choices limit these gains. Each iteration sees only the previous output and cannot directly access earlier computations. Moreover, a fixed loop count wastes depth on easy inputs while leaving hard ones with too little computation. We introduce RecurTrace, which addresses both limitations using the loop's own trajectory. Specifically, Loop Memory Attention lets each looped layer attend to its own states from previous iterations along the loop-time axis, so the model can revisit earlier computations instead of relying on the latest state alone. A halting head then reads the loop state and predicts whether to continue, with supervision from an oracle that identifies when additional depth still reduces loss. In a controlled MathQA comparison on the same looped backbone, RecurTrace achieves 56.9% accuracy with an average of 2.0 loops, exceeding the best fixed loop depth by 2.2 points at matched compute. By comparison, ACT and PonderNet collapse to one loop, and CALM reaches only 54.1% with 5.6 loops, while the stronger LoopUS-Conf and TaH-Mismatch baselines reach 55.3% at 3.2 loops and 55.7% at 2.1 loops. Finally, RecurTrace improves generation accuracy over same-budget fine-tuned baselines at 0.6B, 1.7B, 4B, and 8B, with the gain growing with model size from 0.6 to 3.4 points.

  • 6 authors
·
Sep 9

LatentLoop: Scaling Looped MoE Models with Asymmetric Compute Allocation

Looped Mixture-of-Experts (MoE) models combine parameter reuse with sparse computation to improve performance under matched budgets. Prior work demonstrates that different loop visits can play different roles even when they share parameters. To probe the contributions of different loop visits, we learn separate residual coefficients in a model that applies a shared block twice, observing a smaller scale in the first visit. Fixed coefficient experiments show that reducing the first visit's scale preserves or improves performance, whereas the same reductions to the second hurt it. This asymmetry motivates us to explore asymmetric compute allocation. We propose LatentLoop, which compresses the first visit's sequence, retains full resolution in the second, and reallocates saved computation to increase the hidden size. We further learn how strongly the first visit updates the full sequence, and share MoE weights across visits while using separate attention parameters to accommodate their different sequence resolutions. Across 15 configurations spanning 1.3B--7B parameters, with the largest budget exceeding 10^{21} FLOPs, LatentLoop consistently lowers validation NLL. At a fitted NLL of 1.988, predicted compute savings are 19.0\% and 7.9\% relative to vanilla MoE and the looped baseline. It also improves average scores on nine benchmarks at all sizes in 0-shot and 5-shot settings. These results suggest asymmetric compute allocation is a promising direction for looped MoE models.

  • 8 authors
·
Oct 13 4

LoopArena: Benchmarking Models as Runtime Controllers for Loop Engineering

Loop Engineering is emerging as a practice for organizing development work around coding agents. Instead of writing each prompt by hand, practitioners design loops that monitor progress, assign work, run checks, and decide what the agent should do next. Even with a capable coding agent, a loop may trust a stale progress note, skip needed verification, spend its budget in the wrong direction, or stop before the task is safe to submit. Yet the final outcome of one end-to-end run cannot tell whether success or failure reflects the loop's guidance or the coding agent's ability to carry out the task. We introduce LoopArena, a benchmark for evaluating how well one model can guide a separate coding agent through a long-running task. The model under evaluation is the Controller: after each coding round, it receives a structured summary of the run and instructs a separate, fixed coding agent, the Worker, on what to do or verify next, or decides whether to stop. LoopArena evaluates this ability in three complementary settings that differ in execution scope and cost. Type I scores next-step Loop Contract selection through execution-validated questions without running the Worker at evaluation time. Type II executes repeated control over a selected slice of a full task, while Type III evaluates the paired full task from its original state. On full tasks, the best observed Strict Success Rate is 24.69\%, leaving substantial room for improvement in long-horizon loop control. Across Controllers, the paired reduction in estimated inference cost averages 64.4\%, and Type II produces a similar ordering under the main Core criterion (Spearman's \(ρ=0.9747\)). We release the benchmark data and evaluation code at https://github.com/AMAP-ML/LoopArena .

GD-ML AMAP-ML
·
Aug 27 5

Stop Hand-Holding Your Coding Agent: Engineering the Loops that Replace Step-by-Step Prompting

In mid-2026 a slogan reorganized how practitioners talk about coding agents: stop prompting your agent, start designing the loop that prompts it. We take this claim seriously and give it a careful treatment. We call the object of the new practice the loop specification: a bounded, reusable artifact, made of a trigger, a goal, a verification step, a stopping rule and a memory, that a human hands to an agent harness (such as Claude Code or Codex) so the agent pursues a goal on its own, in place of step-by-step prompting. We distinguish this external loop specification from two things it is often confused with: an ordinary programming loop, and the internal perceive-act-observe cycle that the harness already provides as plumbing. We position loop engineering as a new layer in the progression from prompt to context to harness to loop, and we argue, against the stronger headlines, that it does not retire prompt engineering; loop and prompt are distinct tools with distinct uses. We offer four contributions: a definition and scope for the discipline; an anatomy and taxonomy of loop specifications organized around trigger, goal type, a five-level verification ladder, architecture, and named terminal states; a descriptive analysis of the Loop Library, a public corpus of fifty real loops that we code by hand; and a set of design principles and anti-patterns grounded in the scientific literature on self-correction, reward hacking and model-as-judge fragility. The corpus shows that practice has matured most where the discipline says it matters: seventy percent of loops verify in the autonomous zone of the ladder and seventy-four percent name their terminal states, while automated triggering and durable memory remain comparatively underdeveloped. We close with the limits the practice must respect, including the verification burden, comprehension debt and the risk of cognitive surrender.

  • 1 authors
·
Jun 27

Simply Stabilizing the Loop via Fully Looped Transformer

Scaling model performance typically requires increasing model size. Looped Transformer offers a compelling alternative by iteratively reusing the same Transformer blocks, trading additional computation for improved performance without increasing parameter count or context length. Because the number of loop iterations can be adjusted at inference, it also provides a natural mechanism for balancing performance and test-time compute. However, Looped Transformer still suffers from training instability when the number of loop iterations increases. Our analysis reveals that this instability stems from two sources: gradient oscillation and residual explosion. To address these two problems, we propose the Fully Looped Transformer, which introduces two parameter-free modifications: (1) Fully Looped Architecture, which distributes inter-loop signals across all layers to mitigate residual explosion; (2) Attention Injection, which reuses the existing attention block to suppress gradient oscillation. These modifications stabilize training dynamics, enabling the Fully Looped Transformer to be trained stably up to 12 loop iterations, whereas other baseline looped models collapse in this regime. In milder settings where Looped Transformer does not collapse, Fully Looped Transformer still improves average downstream-task performance by up to 13.2\%. Overall, our experiments demonstrate that Fully Looped Transformer improves training stability, enhances downstream performance, and provides preliminary adaptability under different test-time compute budgets by varying loop iterations at inference.

  • 7 authors
·
May 24

Auto-Formulating Dynamic Programming Problems with Large Language Models

Dynamic programming (DP) is a fundamental method in operations research, but formulating DP models has traditionally required expert knowledge of both the problem context and DP techniques. Large Language Models (LLMs) offer the potential to automate this process. However, DP problems pose unique challenges due to their inherently stochastic transitions and the limited availability of training data. These factors make it difficult to directly apply existing LLM-based models or frameworks developed for other optimization problems, such as linear or integer programming. We introduce DP-Bench, the first benchmark covering a wide range of textbook-level DP problems to enable systematic evaluation. We present Dynamic Programming Language Model (DPLM), a 7B-parameter specialized model that achieves performance comparable to state-of-the-art LLMs like OpenAI's o1 and DeepSeek-R1, and surpasses them on hard problems. Central to DPLM's effectiveness is DualReflect, our novel synthetic data generation pipeline, designed to scale up training data from a limited set of initial examples. DualReflect combines forward generation for diversity and backward generation for reliability. Our results reveal a key insight: backward generation is favored in low-data regimes for its strong correctness guarantees, while forward generation, though lacking such guarantees, becomes increasingly valuable at scale for introducing diverse formulations. This trade-off highlights the complementary strengths of both approaches and the importance of combining them.

  • 6 authors
·
Mar 31

Comfortably Stuck: Evaluation Pitfalls in Bench2Drive's Closed-Loop Protocol

Closed-loop evaluation is widely regarded as a more faithful way to assess end-to-end (E2E) driving models than open-loop evaluation, and Bench2Drive, built on the CARLA simulator, has become the dominant benchmark for it. We show that its evaluation protocol itself contains pitfalls that can misrepresent the models scored on it. Bench2Drive's comfort metric, adapted from nuPlan, has several implementation errors and a segmentation scheme that rewards standing still, so it mostly measures how long a vehicle stays stationary, correlating with stationary time at r = 0.97 across eight models. We propose a corrected, distance-based metric that cuts that correlation to r = 0.06. Under it, the strong driving-score/comfort tradeoff the original metric reports is no longer detectable once models are compared at matched driving speed, which suggests that comfort trades against how fast a model drives rather than against how well it drives. We also uncover two pitfalls in how the harness supplies navigation signals: the default controller can replace a model's own steering with an angle toward the route target point, and the target point supplied at evaluation time can differ substantially from what a model saw in training. We demonstrate both on UniAD and VAD, where their effects differ sharply, and argue that future closed-loop evaluations should check for them. We will release all fixes as standalone code, so corrected comfort scores can be obtained from logged trajectories without re-running closed-loop simulation.

  • 8 authors
·
Oct 19

LOOPer: A Learned Automatic Code Optimizer For Polyhedral Compilers

While polyhedral compilers have shown success in implementing advanced code transformations, they still face challenges in selecting the ones that lead to the most profitable speedups. This has motivated the use of machine learning based cost models to guide the search for polyhedral optimizations. State-of-the-art polyhedral compilers have demonstrated a viable proof-of-concept of such an approach. While promising, this approach still faces significant limitations. State-of-the-art polyhedral compilers that use a deep learning cost model only support a small subset of affine transformations, limiting their ability to explore complex code transformations. Furthermore, their applicability does not scale beyond simple programs, thus excluding many program classes from their scope, such as those with non-rectangular iteration domains or multiple loop nests. These limitations significantly impact the generality of such compilers and autoschedulers and put into question the whole approach. In this paper, we introduce LOOPer, the first polyhedral autoscheduler that uses a deep learning based cost model and covers a large space of affine transformations and programs. LOOPer allows the optimization of an extensive set of programs while being effective at applying complex sequences of polyhedral transformations. We implement and evaluate LOOPer and show that it achieves competitive speedups over the state-of-the-art. On the PolyBench benchmarks, LOOPer achieves a geometric mean speedup of 1.84x over Tiramisu and 1.42x over Pluto, two state-of-the-art polyhedral autoschedulers.

  • 10 authors
·
Mar 18, 2024

Auto Research with Specialist Agents Develops Effective and Non-Trivial Training Recipes

We study auto research as a closed empirical loop driven by external measurement. Each submitted trial carries a hypothesis, an executable code edit, an evaluator-owned outcome, and feedback that shapes the next proposal. The output is not a generated paper or a single model checkpoint, but an auditable trajectory of proposals, code diffs, experiments, scores, and failure labels. We instantiate this loop with specialist agents that partition recipe surfaces and share measured lineage across trials. The central empirical finding is that lineage feedback lets agents turn evaluator outcomes, including crashes, budget overruns, size failures, and accuracy-gate misses, into later program-level recipe edits rather than one-shot suggestions. Across 1,197 headline-run trials plus 600 Parameter Golf control trials after one-time setup and launch, humans did not choose proposals, edit recipes, override scores, or repair failed trials during the search. In the three headline runs, the same submitted-trial loop reduces Parameter Golf validation bpb by 0.81%, raises NanoChat-D12 CORE by 38.7%, and reduces CIFAR-10 Airbench96 wallclock by 4.59%, with each task measured by its own external evaluator and legality checks. The trace includes a strict architecture-domain audit of 157 headline-run submissions and program rewrites such as a NanoChat attention-kernel path change. Within this scope the loop autonomously writes code, submits experiments, absorbs feedback, applies and combines known techniques inside each environment, and improves public starting recipes.

Pseudo-Simulation for Autonomous Driving

Existing evaluation paradigms for Autonomous Vehicles (AVs) face critical limitations. Real-world evaluation is often challenging due to safety concerns and a lack of reproducibility, whereas closed-loop simulation can face insufficient realism or high computational costs. Open-loop evaluation, while being efficient and data-driven, relies on metrics that generally overlook compounding errors. In this paper, we propose pseudo-simulation, a novel paradigm that addresses these limitations. Pseudo-simulation operates on real datasets, similar to open-loop evaluation, but augments them with synthetic observations generated prior to evaluation using 3D Gaussian Splatting. Our key idea is to approximate potential future states the AV might encounter by generating a diverse set of observations that vary in position, heading, and speed. Our method then assigns a higher importance to synthetic observations that best match the AV's likely behavior using a novel proximity-based weighting scheme. This enables evaluating error recovery and the mitigation of causal confusion, as in closed-loop benchmarks, without requiring sequential interactive simulation. We show that pseudo-simulation is better correlated with closed-loop simulations (R^2=0.8) than the best existing open-loop approach (R^2=0.7). We also establish a public leaderboard for the community to benchmark new methodologies with pseudo-simulation. Our code is available at https://github.com/autonomousvision/navsim.

  • 14 authors
·
Jun 4, 2025

ResidualQuant: KV Cache Quantization for Looped Transformers with 2-Bit Residuals

Looped Transformers improve parameter efficiency by repeatedly applying shared Transformer blocks over multiple recurrent loops, increasing computational depth without increasing the parameter count. However, KV cache memory still scales with the number of loops, becoming a key memory bottleneck that limits batch size and inference throughput. KV cache quantization can alleviate this bottleneck, but existing methods often suffer substantial accuracy degradation at aggressive low-precision regimes. We observe that looped Transformers offer a unique opportunity: KV states across loops are highly similar. Based on this observation, we propose ResidualQuant, which uses the final-loop KV states as a reference and represents the remaining loops with low-precision residuals. Our method further combines least-square scaling and rotations applied to the residuals, as well as loop-wise mixed precision, to enable accurate quantization down to INT2 while retaining efficient reconstruction. Across multiple looped Transformer models and mathematical reasoning and code generation benchmarks, ResidualQuant consistently improves the accuracy-memory tradeoff over state-of-the-art rotation-based KV quantization. In particular, our method retains accuracy close to BF16 under mixed-precision settings while reducing theoretical KV storage by 80.7%, achieving up to 13.0% higher accuracy than the rotation-based baseline at the same memory budget. On an RTX 5090, the reduced KV memory traffic improves fixed-batch decode throughput by up to 2.73x, while the smaller memory footprint enables up to 2x larger batches, improving peak throughput by up to 4.15x.

kaist-ai KAIST AI
·
Oct 6 1

Recurrent Self-Improvement: Dynamic Cross-Loop On-Policy Distillation for Looped Language Models

Looped Language Models (LoopLMs) offer a parameter efficient approach to scaling reasoning by reusing shared parameters across recurrent computation steps. Despite their promise, effective post-training of LoopLMs remains challenging. Existing approaches either provide reward based supervision that is sparse or costly to extend across loops, or rely on external teachers or privileged information, leading to limited teacher availability or teacher-student context mismatch. To address these limitations, we introduce LoopOPD, a cross-loop on-policy distillation framework that uses additional recurrent computation within a LoopLM as its own source of supervision. LoopOPD uses a frozen terminal loop policy as a compute privileged teacher for an intermediate loop student on student generated rollouts, providing dense supervision without an external teacher or privileged information. We further propose Dynamic LoopOPD (D-LoopOPD), which continually refreshes the terminal loop teacher as the shared model parameters are updated, enabling recurrent self-improvement. We characterize how distillation updates propagate across loop depths and derive sufficient conditions under which a single update yields simultaneous local improvement at both loop depths. Experiments on Ouro-Thinking models show that LoopOPD improves mathematical reasoning, while D-LoopOPD yields further gains through dynamic teacher updates. Despite being trained only on mathematical data, the resulting models also improve on general reasoning and code generation benchmarks, demonstrating that recurrent computation can serve as an effective source of supervision for LoopLMs. Our code and model checkpoints will be released upon acceptance.

  • 5 authors
·
Oct 6

LoopTool: Closing the Data-Training Loop for Robust LLM Tool Calls

Augmenting Large Language Models (LLMs) with external tools enables them to execute complex, multi-step tasks. However, tool learning is hampered by the static synthetic data pipelines where data generation and model training are executed as two separate, non-interactive processes. This approach fails to adaptively focus on a model's specific weaknesses and allows noisy labels to persist, degrading training efficiency. We introduce LoopTool, a fully automated, model-aware data evolution framework that closes this loop by tightly integrating data synthesis and model training. LoopTool iteratively refines both the data and the model through three synergistic modules: (1) Greedy Capability Probing (GCP) diagnoses the model's mastered and failed capabilities; (2) Judgement-Guided Label Verification (JGLV) uses an open-source judge model to find and correct annotation errors, progressively purifying the dataset; and (3) Error-Driven Data Expansion (EDDE) generates new, challenging samples based on identified failures. This closed-loop process operates within a cost-effective, open-source ecosystem, eliminating dependence on expensive closed-source APIs. Experiments show that our 8B model trained with LoopTool significantly surpasses its 32B data generator and achieves new state-of-the-art results on the BFCL-v3 and ACEBench benchmarks for its scale. Our work demonstrates that closed-loop, self-refining data pipelines can dramatically enhance the tool-use capabilities of LLMs.

One Model to Loop Them All: Elastic Latent Recurrence for Language Models

A latent recurrent language model applies a shared block of layers repeatedly, so one checkpoint can trade inference compute for accuracy by changing the loop count. At one loop, however, such models typically fall well short of a non-recurrent model of the same size, a one-loop tax that makes a separate non-recurrent model the better choice whenever latency matters. We present Elastic Latent Recurrence (ELR), a recipe for training looped language models without this tax. At one loop, an ELR model costs the same to serve as a non-recurrent model of the same size and, trained on the same data, reaches similar accuracy. Each additional loop then buys more accuracy for more inference compute. Three choices make this work: a gated state update with a learned step size, loop counts mixed within each optimizer update, and conditioning each pass on its loop index and budget. The first two preserve one-loop accuracy, and the third lowers loss at every additional loop. Mixed depths can be introduced late in pretraining to limit the added training cost, and with zero-initialized conditioning added at the switch, this late schedule reaches lower loss than mixed-depth training from scratch. In MoE models, reusing first-loop expert routes on later loops cuts mixed-depth update time by 11.7% with no measurable change in accuracy. At inference, keeping only the last loop's attention KV cache holds attention KV memory at its one-loop level while retaining most of the gain from additional loops. On 4B dense and 30B-A3B MoE hybrid models, ELR at one loop is 0.52 points below and 1.04 points above its matched baseline on a ten-task average, and four loops add 7.25 and 4.75 points. Carried through post-training, the recipe yields Koi-4B, a single checkpoint that scores an estimated 18 on the Artificial Analysis Intelligence Index at one loop, matching Qwen3.5-4B, and 29 at four loops.

nvidia NVIDIA
·
Oct 7 3

Dory1.0-4B: A Looped Normalized-GPT

We introduce Dory1.0-4B, a 4-billion-parameter looped (latent-recurrent) language model with elastic depth: a single checkpoint serves different inference compute budgets. Dory1.0-4B is built on a normalized Transformer (nGPT) backbone with interleaved sliding-window and full-attention layers, organized into an input block, a shared recurrent block, and an output block. At inference, the recurrent block can be applied a variable number of times. We pre-trained Dory1.0-4B on 6 trillion tokens. The first 4.5 trillion tokens were trained in NVFP4, and additional pre-training then extended the context length to 256K tokens. Next, we post-trained the model using Supervised Fine-Tuning (SFT) and Reinforcement Learning with Verifiable Rewards (RLVR), with a difficulty-aware loop curriculum that routes harder prompts to deeper loops. Increasing the loop count improves accuracy, with the largest gains on coding, agentic, and long-context benchmarks. With two or more loops, Dory1.0-4B outperforms larger models such as Qwen3.5-9B, Gemma 4 12B, and Gemma 4 26B-A4B on average across 12 benchmarks. Looping also makes Dory1.0-4B more token-efficient on agentic benchmarks: with four loops, it generates 1.3-2.5x fewer tokens than with one loop, as the extra computation is spent in latent space rather than on longer outputs. To reduce memory during looping, Dory1.0-4B caches keys and values only from the last loop, keeping its KV-cache footprint equal to that of a non-looped model at any loop count while retaining most of the accuracy gains. We open-source the BF16, MXFP8, NVFP4, and GGUF quantized checkpoints.

nvidia NVIDIA
·
Nov 1 2

FlashLoop: Fast and Memory-Efficient Looped Transformers via Lazy Updates

Looped Transformers have attracted substantial attention as a parameter-efficient approach to increasing computational depth through repeated application of shared Transformer blocks. However, their practical advantages over conventional Transformers remain under debate: each additional loop incurs another Transformer pass and requires caching another set of KV states, causing inference FLOPs and KV-cache memory to grow continuously with loop depth. This overhead becomes particularly severe at large loop counts and long context, preventing the parameter efficiency of Looped Transformers from translating into practical inference efficiency. In this paper, we find that much of the additional computation and storage introduced by looping is redundant. As recurrence proceeds, state changes become increasingly concentrated on a small subset of tokens; attention-output differences are dominated by a sparse and stable subset of key columns; and KV residuals between adjacent loops become progressively more amenable to low-bit quantization. Building on these observations, we introduce FlashLoop, a training-free inference framework that reduces cross-loop redundancy through token-sparse updates, sparse attention, and KV-residual quantization. Across several Looped Transformers models, FlashLoop delivers lossless accuracy while achieving up to 1.64times end-to-end speedup and up to 6times KV-cache memory reduction, substantially improving the practicality of scaling Looped Transformers to greater computational depths and longer context.

  • 2 authors
·
Sep 23 1

NAVSIM: Data-Driven Non-Reactive Autonomous Vehicle Simulation and Benchmarking

Benchmarking vision-based driving policies is challenging. On one hand, open-loop evaluation with real data is easy, but these results do not reflect closed-loop performance. On the other, closed-loop evaluation is possible in simulation, but is hard to scale due to its significant computational demands. Further, the simulators available today exhibit a large domain gap to real data. This has resulted in an inability to draw clear conclusions from the rapidly growing body of research on end-to-end autonomous driving. In this paper, we present NAVSIM, a middle ground between these evaluation paradigms, where we use large datasets in combination with a non-reactive simulator to enable large-scale real-world benchmarking. Specifically, we gather simulation-based metrics, such as progress and time to collision, by unrolling bird's eye view abstractions of the test scenes for a short simulation horizon. Our simulation is non-reactive, i.e., the evaluated policy and environment do not influence each other. As we demonstrate empirically, this decoupling allows open-loop metric computation while being better aligned with closed-loop evaluations than traditional displacement errors. NAVSIM enabled a new competition held at CVPR 2024, where 143 teams submitted 463 entries, resulting in several new insights. On a large set of challenging scenarios, we observe that simple methods with moderate compute requirements such as TransFuser can match recent large-scale end-to-end driving architectures such as UniAD. Our modular framework can potentially be extended with new datasets, data curation strategies, and metrics, and will be continually maintained to host future challenges. Our code is available at https://github.com/autonomousvision/navsim.

  • 12 authors
·
Jun 21, 2024 1

DualVLA: Building a Generalizable Embodied Agent via Partial Decoupling of Reasoning and Action

To build a generalizable Vision-Language-Action (VLA) model with strong reasoning ability, a common strategy is to first train a specialist VLA on robot demonstrations to acquire reliable manipulation skills, and then incorporate mixed annotated robot data together with multimodal data to restore broader reasoning capabilities. However, we observe that the resulting reasoning VLA often suffers from degraded action performance compared to the specialist model before fine-tuning, a phenomenon we refer to as action degeneration. To address this issue, we propose DualVLA, which enhances action performance through carefully designed post-training while still preserving reasoning capability. We first introduce a dual-layer data pruning method that removes redundant embodied reasoning, preventing it from adversely influencing action learning. To further strengthen action generation, we design a dual-teacher adaptive distillation strategy that assigns different supervision signals to different data domains while maintaining reasoning ability. To fill the evaluation gap for generalist VLAs, we also propose VLA Score, which decouples VLA capability into reasoning, intention, action, and alignment dimensions for a more fine-grained assessment. Experiments show that DualVLA achieves an average success rate of 61.0 in SimplerEnv and an average score of 65.4 across eight competitive multimodal benchmarks, demonstrating a stronger balance between precise action execution and multimodal understanding. Project Website: https://costaliya.github.io/DualVLA/.

  • 10 authors
·
Nov 27, 2025 2

LoopVQ: Sub 1-bit KV Cache Quantization for Looped Transformers

Looped transformers are a parameter-efficient alternative to standard transformers for language modeling. By reapplying the same layers across multiple loop steps, recent looped language models match the performance of non-looped models several times their size. While this architecture effectively reduces parameter memory, each loop step still stores its own keys and values, so the key-value (KV) cache grows linearly with the number of loop steps and becomes the main memory bottleneck. We observe that the KV cache of looped models is highly redundant along the loop axis and that the loop steps differ substantially in their sensitivity to quantization. Based on these observations, we propose LoopVQ, a KV cache vector quantization method for looped transformers that codes channels of multiple loop steps jointly, and fine-tunes the codebooks to match the output of the full-precision model. At 0.5 bits per element, LoopVQ outperforms existing KV cache vector quantization methods for standard LLMs on general, long chain-of-thought reasoning, and long-context retrieval tasks with Ouro and Huginn models. Its design is orthogonal to these methods, and combined with TaSQ, it retains much of the BF16 accuracy even at 0.25 bits per element. We also implement LoopVQ in SGLang, where it nearly halves the decode latency at a 32K-token context and raises the peak serving throughput by up to 4.3times and 6.1times on the 1.4B and 2.6B Ouro models compared to the BF16 baseline.

Parcae: Scaling Laws For Stable Looped Language Models

Traditional fixed-depth architectures scale quality by increasing training FLOPs, typically through increased parameterization, at the expense of a higher memory footprint, or data. A potential alternative is looped architectures, which instead increase FLOPs by sending activations through a block of layers in a loop. While promising, existing recipes for training looped architectures can be unstable, suffering from residual explosion and loss spikes. We address these challenges by recasting looping as a nonlinear time-variant dynamical system over the residual stream. Via a linear approximation to this system, we find that instability occurs in existing looped architectures as a result of large spectral norms in their injection parameters. To address these instability issues, we propose Parcae, a novel stable, looped architecture that constrains the spectral norm of the injection parameters via discretization of a negative diagonal parameterization. As a result, Parcae achieves up to 6.3% lower validation perplexity over prior large-scale looped models. Using our stable looped architecture, we investigate the scaling properties of looping as a medium to improve quality by increasing FLOPs in training and test-time. For training, we derive predictable power laws to scale FLOPs while keeping parameter count fixed. Our initial scaling laws suggest that looping and data should be increased in tandem, given a fixed FLOP budget. At test-time, we find that Parcae can use looping to scale compute, following a predictable, saturating exponential decay. When scaled up to 1.3B parameters, we find that Parcae improves CORE and Core-Extended quality by 2.99 and 1.18 points when compared to strong Transformer baselines under a fixed parameter and data budget, achieving a relative quality of up to 87.5% a Transformer twice the size.

Regimes: An Auditable, Held-Out-Gated Improvement Loop Demonstrated on LongMemEval with ActiveGraph

Autonomous improvement loops are hard to trust because the improvement process is usually external scaffolding bolted onto the agent: failures go unlogged, diagnoses cannot be replayed, and promote-or-discard decisions land in a side database rather than the agent's own history. We show that an event-sourced agent runtime removes that friction and turns controlled improvement into a first-class workflow. When the agent's state is a deterministic projection of an append-only event log, failures are recorded, a run replays exactly from its log, candidate patches scope to typed pipeline seams, gates are auditable, and every promotion or discard is itself an event. We demonstrate this with Regimes, a loop on the ActiveGraph runtime that diagnoses failed evaluations, proposes a repair at a pipeline point, and promotes it only after static checks, sandbox execution, in-sample evaluation, and held-out validation. The loop is target-agnostic: the same control flow runs against different tasks through a common interface. On LongMemEval-S the dominant failure is not retrieval but reconciliation: the evidence is already in the assembled context, yet the reader answers incorrectly. Across five seeded held-out splits, Regimes discovers reader-prompt repairs that improve final held-out accuracy by +0.05 to +0.10 in four splits and +0.01 in one over-promotion split; two splits are individually significant (seed 5 unadjusted for its sequential promotion structure), and the pooled count is descriptive only, since the splits share one 500-question pool. The durable contributions are ActiveGraph as an auditable substrate that makes controlled improvement loops tractable, the held-out-gated loop it supports, the failure-regime taxonomy routing each failure to a pipeline location (whose marginal value over an unrouted baseline is the primary open question), and the prompt-as-discovery-probe hypothesis.

  • 1 authors
·
Jun 7

FlowSim: Rendering-Free Closed-Loop Simulation for Evaluating End-to-End Driving Systems

Closed-loop evaluation of end-to-end (E2E) driving systems typically relies on generating sensor observations and re-processing them through the perception encoder, introducing substantial computational cost and a sim2real gap between simulated and real sensor observations. In this paper, we ask a more fundamental question: is image-space simulation necessary for closed-loop evaluation of E2E driving systems? We propose FlowSim, a rendering-free simulation paradigm that predicts the internal latent representation directly from a previous latent and target-frame symbolic scene conditions. The predicted latent is then processed by the original frozen downstream modules, eliminating image rendering and perception re-encoding. Explicit cross-frame agent association improves latent transition prediction and rollout stability, while variable-horizon simulation enables long-horizon prediction from a common real anchor without accumulating intermediate rollout errors. Experiments on nuScenes and NavSim demonstrate that FlowSim preserves downstream behavior competitively with, and often exceeds image-space simulation in source-to-reference agreement across variable simulation horizons and both dense and sparse latent representations. By predicting the latent directly, both instantiations of FlowSim simulate each step in 0.04--0.06s, substantially faster than the image-space simulation methods they are compared against. These results establish FlowSim as an efficient and practical alternative to conventional image-space simulation methods. Our project page is https://hanfeng-wu.github.io/flowsim_page/.

  • 4 authors
·
Oct 13

ASPIRE: Agentic /Skills Discovery for Robotics

Traditional robot programming is challenging: it requires orchestrating multimodal perception, managing physical contact dynamics, and handling diverse configurations and execution failures. We introduce ASPIRE (Agentic Skill Programming through Iterative Robot Exploration), a continual learning system that autonomously writes and refines robot control programs in a code-as-policy paradigm while compounding experience into a reusable skill library. ASPIRE discovers skills that persist across tasks, simulation and real-world settings, and embodiments. It operates in an open-ended loop with three components: (1) a closed-loop robot execution engine that exposes fine-grained multimodal traces, enabling autonomous failure diagnosis, repair synthesis, and validation; (2) a continually expanding skill library that distills validated fixes into reusable, transferable knowledge; and (3) evolutionary search that generates diverse task sequences and control programs to explore beyond single-trajectory refinement. ASPIRE surpasses prior methods by up to 77% on LIBERO-Pro manipulation under perturbation, 72% on Robosuite bimanual handover, and 32% on BEHAVIOR-1K long-horizon household tasks. Its accumulated library also enables zero-shot generalization to unseen long-horizon tasks: on LIBERO-Pro Long, ASPIRE achieves 31% success versus 4% for prior methods despite their use of test-time reasoning and retries. Finally, simulation-discovered skills provide initial evidence of sim-to-real transfer, substantially reducing real-robot programming effort across different embodiments and robot APIs.

nvidia NVIDIA
·
Jun 29 2

CUA-Master: Scaling Computer-use Agents through Open-World Recursive Improvements

Despite recent advances in CUAs, their development remains constrained by the limited diversity, controllability, and reliability of interaction data. Moreover, conventional optimization pipelines lack iterative feedback, while existing recursive improvement approaches often rely on self-generated experiences, limiting ability expansion and yielding diminishing returns. To address these challenges, we introduce CUA-Master, a nested double-loop recursive improvement framework. At the system level, an outer world-data-model flywheel continuously incorporates open-world corpus and leverages evolving model weaknesses to guide subsequent data construction and optimization iterations. At the data level, an inner flywheel couples open-world seeding and autocatalytic propagation. The former mines authentic workflows as seed tasks from instructional videos, and employs visual-semantic dual-path trajectory reconstruction; The latter transforms these seeds into reusable primitives for controllable synthesis of diverse, complex, and verifiable tasks. To enable efficient and reliable trajectory collection, we further introduce a feedback-guided snapshot-rollback retry mechanism in various real environments. Extensive experiments demonstrate that CUA-Master-27B achieves competitive performance across GUI-only and GUI-CLI hybrid benchmarks, scoring 80.2 on OSWorld Verified, 36.9 on OSWorld 2.0, 43.9 on WeaveBench, and 25.0 on Agents' Last Exam. Our framework also substantially improves the quality and efficiency of data synthesis, and exhibits continuous gains across recursive iterations.

  • 18 authors
·
Nov 2 2

Recursive self-improvement of AI research agents

AI agents are beginning to automate research and development across the AI stack, from improving training efficiency to optimizing inference. A natural next step is to improve the research efficiency of the agents themselves. When an AI research agent's own code is the object of optimization, each accepted rewrite becomes the agent that the next round edits. We refer to this loop as recursive self-improvement. Its significance lies in a long-standing trend, in which increased cumulative spending on R&D yields diminishing returns. Sustained self-improvement offers a way to counter this trend. We present AIDE^2, a system that implements this loop for a frontier AI research agent. It proposes changes to its own code, benchmarks modified versions of itself on a suite of AI R&D tasks, and keeps the changes that perform best on hidden evaluations. In an autonomous 8-day run, AIDE^2 discovered seven successive improvements, ranging from a new search policy to memory mechanisms that compress and manage the agent's growing context. These gains generalize to four held-out benchmarks spanning machine learning engineering, heuristic algorithm engineering, and physics-based weather forecasting, the last of which is out of distribution from the selection tasks. On all four, the strongest discovered agent matches or exceeds a human-engineered production research agent that ranks among the strongest on FML-Bench. On a separate held-out task family, the discovered agents also exhibit reduced reward hacking, a property the loop never explicitly optimized for: the rate falls from 55% to 32% during the run, 7 percentage points below the human-engineered agent. Together, these results show that an AI research agent can improve its own research efficiency through recursive self-improvement, and that these gains transfer to tasks and domains the loop never encountered.

WecoAI Weco AI
·
Sep 21 1

Adaptive Collaboration with Humans: Metacognitive Policy Optimization for Multi-Agent LLMs with Continual Learning

While scaling individual Large Language Models (LLMs) has delivered remarkable progress, the next frontier lies in scaling collaboration through multi-agent systems (MAS). However, purely autonomous MAS remain ''closed-world'' systems, constrained by the static knowledge horizon of pre-trained models. This limitation makes them brittle on tasks requiring knowledge beyond training data, often leading to collective failure under novel challenges. To address this, we propose the Human-In-the-Loop Multi-Agent Collaboration (HILA) framework, a principled paradigm for human--agent collaboration. HILA trains agents to learn a metacognitive policy that governs when to solve problems autonomously and when to defer to a human expert. To operationalize this policy, we introduce Dual-Loop Policy Optimization, which disentangles immediate decision-making from long-term capability growth. The inner loop applies Group Relative Policy Optimization (GRPO) with a cost-aware reward to optimize deferral decisions, while the outer loop implements continual learning, transforming expert feedback into high-quality supervised signals that strengthen the agent's reasoning ability. Experiments on challenging mathematical and problem-solving benchmarks show that HILA, equipped with Dual-Loop Policy Optimization, consistently outperforms advanced MAS, establishing a principled foundation for collaborative and continually improving agentic systems.

  • 5 authors
·
Mar 8

Bench2Drive-VL: Benchmarks for Closed-Loop Autonomous Driving with Vision-Language Models

With the rise of vision-language models (VLM), their application for autonomous driving (VLM4AD) has gained significant attention. Meanwhile, in autonomous driving, closed-loop evaluation has become widely recognized as a more reliable validation method than open-loop evaluation, as it can evaluate the performance of the model under cumulative errors and out-of-distribution inputs. However, existing VLM4AD benchmarks evaluate the model`s scene understanding ability under open-loop, i.e., via static question-answer (QA) dataset. This kind of evaluation fails to assess the VLMs performance under out-of-distribution states rarely appeared in the human collected datasets.To this end, we present Bench2Drive-VL, an extension of Bench2Drive that brings closed-loop evaluation to VLM-based driving, which introduces: (1) DriveCommenter, a closed-loop generator that automatically generates diverse, behavior-grounded question-answer pairs for all driving situations in CARLA,including severe off-route and off-road deviations previously unassessable in simulation. (2) A unified protocol and interface that allows modern VLMs to be directly plugged into the Bench2Drive closed-loop environment to compare with traditional agents. (3) A flexible reasoning and control framework, supporting multi-format visual inputs and configurable graph-based chain-of-thought execution. (4) A complete development ecosystem. Together, these components form a comprehensive closed-loop benchmark for VLM4AD. All codes and annotated datasets are open sourced.

  • 6 authors
·
Mar 31

LoopUS: Recasting Pretrained LLMs into Looped Latent Refinement Models

Looped computation shows promise in improving the reasoning-oriented performance of LLMs by scaling test-time compute. However, existing approaches typically require either training recurrent models from scratch or applying disruptive retrofits, which involve substantial computational costs and may compromise pretrained capabilities. To address these limitations, we introduce Looped Depth Up-Scaling (LoopUS), a post-training framework that converts a standard pretrained LLM into a looped architecture. As a key technical contribution, LoopUS recasts the pretrained LLM into an encoder, a looped reasoning block, and a decoder. It operationalizes this latent-refinement architecture through four core components: (1) block decomposition, guided by staged representation dynamics; (2) an input-dependent selective gate to mitigate hidden-state drift; (3) random deep supervision for memory-efficient learning over long recursive horizons; and (4) a confidence head for adaptive early exiting. Collectively, these mechanisms transform a standard non-looped model into a looped form while stabilizing it against both computational bottlenecks and representation collapse. Through stable latent looping, LoopUS improves reasoning-oriented performance without extending the generated traces or requiring recurrent training from scratch. For more details, see https://thrillcrazyer.github.io/LoopUS

Reducing Inference Energy Consumption Using Dual Complementary CNNs

Energy efficiency of Convolutional Neural Networks (CNNs) has become an important area of research, with various strategies being developed to minimize the power consumption of these models. Previous efforts, including techniques like model pruning, quantization, and hardware optimization, have made significant strides in this direction. However, there remains a need for more effective on device AI solutions that balance energy efficiency with model performance. In this paper, we propose a novel approach to reduce the energy requirements of inference of CNNs. Our methodology employs two small Complementary CNNs that collaborate with each other by covering each other's "weaknesses" in predictions. If the confidence for a prediction of the first CNN is considered low, the second CNN is invoked with the aim of producing a higher confidence prediction. This dual-CNN setup significantly reduces energy consumption compared to using a single large deep CNN. Additionally, we propose a memory component that retains previous classifications for identical inputs, bypassing the need to re-invoke the CNNs for the same input, further saving energy. Our experiments on a Jetson Nano computer demonstrate an energy reduction of up to 85.8% achieved on modified datasets where each sample was duplicated once. These findings indicate that leveraging a complementary CNN pair along with a memory component effectively reduces inference energy while maintaining high accuracy.

  • 4 authors
·
Dec 1, 2024

Loop-μP: Residual Scaling and Hyperparameter Transfer in Looped Transformers

Looped Transformers have drawn growing attention because looping improves multi-step reasoning and increases the executed depth of a model without adding parameters. They achieve this by reusing a stack of L layers for N loops. However, increasing the loop count N not only destabilizes training but also shifts the best hyperparameters, so they must be searched again for every loop count. Inspired by Depth-μP (Yang et al., 2024), which multiplies each residual branch by L^{-1/2} for depth L so that a learning rate tuned on a shallow untied network transfers to a deep one, we study how the residual branches and the learning rate should scale with the loop count N. We find that loops cannot simply be treated as extra depth, because the loops share weights. At initialization, distinct layers add nearly uncorrelated increments to the residual stream, so their sum grows as L, whereas a shared layer adds positively correlated increments at every loop, so their sum grows linearly in N. For a single layer looped N times, we show in the infinite-width limit that multiplying the residual branch by 1/N and keeping the learning rate independent of N is the only parameterization with both a stable forward pass and maximal residual-stream updates. We then generalize the analysis to a stack of L distinct layers looped N times to obtain a parameterization we call Loop-μP, in which the loop factor 1/N combines with the depth factor L^{-1/2}. Empirically, we find in language modeling that the base learning rate tuned on the smallest model stays best under Loop-μP for loop counts up to 8 and executed depths up to 384 layers. These results make Loop-μP a practical recipe for scaling looped Transformers.

  • 7 authors
·
Oct 17

Proof-or-Stop: Don't Trust the Agent, Trust the Evidence -- Loop Engineering for Verifiable Evidence-Gated Lifecycle Control

Autonomous coding agents increasingly execute multi-step software work, but lifecycle states such as reviewed, tested, DONE, and ready-to-merge remain claims unless supported by current evidence. We present Proof-or-Stop Lifecycle Control, a method that permits lifecycle transitions only when fresh, tracked-source-state-bound, mechanically verifiable evidence satisfies the relevant gate. The method treats agent outputs as claims rather than lifecycle state, and uses proof operationally to mean gate-admissible evidence under a stated trust model, not semantic program correctness. We evaluate an open-source implementation through mechanism tests, a powered control-policy ablation, and operated self-application evidence. The unattended-loop engine passed 10 of 10 scenarios with zero false-DONE, and local-key receipt bundles rejected 18 tamper classes with zero false accepts. In a 9,240-cell ablation, the pre-registered A4 versus A2-prime comparison reduced visible-pass/hidden-fail amplification from 31 of 1,800 injected cells under a compute-budgeted naive loop to 2 of 1,800 under the gated loop, a 1.6 percentage-point improvement in not-amplified rate with a 95 percent confidence interval of [0.8, 2.5]. A near-compute A3 versus A4 comparison, 14 of 1,800 versus 2 of 1,800, indicates that the gain is associated with enforcing review as a lifecycle gate rather than merely adding a reviewer. The self-application corpus contains 565 stories and 1,007 review findings, with 94.8 percent resolved, plus a 68-row high/critical cross-vendor exhibit. These results support Proof-or-Stop as a model-agnostic, host-neutral control layer for deciding which autonomous-agent claims a lifecycle may act on. The evaluation is limited to one model family, 24 ablation tasks, and a self-hosted corpus.

  • 6 authors
·
Jul 15

WHALE: A Simple Recipe for Joint Harness-Weight Optimization

Agent performance depends jointly on the model parameters and the executable harness code that manages context and control flow. Optimizing either component in isolation can leave the system bottlenecked by its frozen counterpart: weight updates can change which harness is effective, while harness updates can change which model capabilities are exposed. Existing joint-adaptation methods optimize weights and textual prompts but leave the broader harness fixed. We propose Weight-Harness Alternating LEarning (WHALE), a simple recipe that alternates two phases: updating the model under the current harness, then searching for a better harness under the updated model. We instantiate these two phases with online rejection-sampling fine-tuning and Meta-Harness, respectively. When to switch is a key design choice: to separate real improvements from noise without over-optimizing against a changing counterpart, WHALE uses either fixed phase durations or an adaptive patience rule over training signals. Using Qwen3.5-2B/4B agents across three domains (search question answering, mathematical reasoning, and chess puzzles), WHALE outperforms weight-only, harness-only, and Fast-Slow Training by 4.15-24.38 percentage points in best mean@8 accuracy. Either component can be the bottleneck: harness search matches peak weight-only accuracy with far fewer rollouts in SearchQA, but improves math accuracy only after a weight update. Small interleaved updates also outperform stagewise weight-then-harness optimization in accuracy and rollout cost. The code is available at https://github.com/krafton-ai/WHALE.

KRAFTON KRAFTON
·
Aug 30 2

What Makes Recurrence Effective in Looped Language Models?

Looped language models (LoopLMs) increase computational depth through parameter sharing, offering a path to scale inference computation without adding parameters. However, it remains unclear when additional recurrence is beneficial and how architectural choices affect its effectiveness. Through controlled experiments, we systematically examine (1) when recurrence helps, (2) where it should be applied, and (3) how its conditioning affects performance. Our evaluation covers inference budgets below, within, and beyond the training horizon under knowledge and reasoning tasks. (1) We find that recurrence can improve reasoning beyond the training horizon while degrading knowledge performance, but harder reasoning instances do not consistently benefit more. (2) Performance also depends on how distinct layers and recurrent iterations are allocated, showing that effective depth alone is insufficient to predict behavior. Non-recurrent output layers improve robustness to under-unrolling, while the preferred placement of input and output layers varies with inference budget. (3) Finally, we find that conventional initial-state injection offers limited robustness to varying recurrence depth. We therefore propose history-state injection as an alternative, and show that channel-wise history-state injection combined with timestep conditioning offers a low-cost and more effective design, better preserving knowledge under extended unrolling while improving robustness across inference budgets. Overall, our results clarify when recurrent computation helps, where it fails, and offer practical guidelines for designing LoopLMs across variable inference budgets.

Reinforcement Learning for Long-Horizon Interactive LLM Agents

Interactive digital agents (IDAs) leverage APIs of stateful digital environments to perform tasks in response to user requests. While IDAs powered by instruction-tuned large language models (LLMs) can react to feedback from interface invocations in multi-step exchanges, they have not been trained in their respective digital environments. Prior methods accomplish less than half of tasks in sophisticated benchmarks such as AppWorld. We present a reinforcement learning (RL) approach that trains IDAs directly in their target environments. We formalize this training as a partially observable Markov decision process and derive LOOP, a data- and memory-efficient variant of proximal policy optimization. LOOP uses no value network and maintains exactly one copy of the underlying LLM in memory, making its implementation straightforward and as memory-efficient as fine-tuning a single LLM. A 32-billion-parameter agent trained with LOOP in the AppWorld environment outperforms the much larger OpenAI o1 agent by 9 percentage points (15% relative). To our knowledge, this is the first reported application of RL to IDAs that interact with a stateful, multi-domain, multi-app environment via direct API calls. Our analysis sheds light on the effectiveness of RL in this area, showing that the agent learns to consult the API documentation, avoid unwarranted assumptions, minimize confabulation, and recover from setbacks.

  • 7 authors
·
Feb 3, 2025

DREAM Technical Report

Industrial recommender systems commonly use cascaded retrieval, ranking, and re-ranking pipelines. Although efficient, these pipelines fragment information and objectives across modules, rely on rigid rules, and have limited awareness of real-time intent, leaving session-level shifts among browsing, comparison, and purchase insufficiently addressed. We present DREAM (Developing Recommender Engine with Agentic Methods), an autonomous optimization control architecture that adds a perception-aware, orchestrable, and auditable policy layer atop existing pipelines without replacing them. DREAM has two core components. First, a three-tier Intent Engine fuses on-device signals into structured L0/L1/L2 intent representations; its edge-cloud trigger chain reduces reporting volume to approximately 8.7%. Second, a Meta Engine uses a MetaModel for layered M1-to-M2-to-M3 reasoning: intent summarization, strategy planning informed by Strategy Memory, and parameter translation. It dispatches the resulting parameters through a unified outlet with safety guardrails. A Reward Dual Loop continuously optimizes both components by combining offline simulation for strategy-space exploration with online feedback for outcome calibration, forming a cycle of generation, execution, evaluation, and experience accumulation. Large-scale A/B tests on Taobao's homepage feed show that re-ranking control alone improves IPV by 2.06%, Core IPV by 2.39%, and GMV by 0.88%. Extending control to fine ranking raises these gains to 2.71%, 3.06%, and 1.31%, respectively, while consistently improving PV by more than 1%. These gains require neither replacement of pipeline models nor compromise of serving stability, supporting agentic meta-control as a viable paradigm for industrial recommendation.

alibabagroup alibaba
·
Aug 12 2

Evaluation-driven Scaling for Scientific Discovery

Language models are increasingly used in scientific discovery to generate hypotheses, propose candidate solutions, implement systems, and iteratively refine them. At the core of these trial-and-error loops lies evaluation: the process of obtaining feedback on candidate solutions via verifiers, simulators, or task-specific scoring functions. While prior work has highlighted the importance of evaluation, it has not explicitly formulated the problem of how evaluation-driven discovery loops can be scaled up in a principled and effective manner to push the boundaries of scientific discovery, a problem this paper seeks to address. We introduce Simple Test-time Evaluation-driven Scaling (SimpleTES), a general framework that strategically combines parallel exploration, feedback-driven refinement, and local selection, revealing substantial gains unlocked by scaling evaluation-driven discovery loops along the right dimensions. Across 21 scientific problems spanning six domains, SimpleTES discovers state-of-the-art solutions using gpt-oss models, consistently outperforming both frontier-model baselines and sophisticated optimization pipelines. Particularly, we sped up the widely used LASSO algorithm by over 2x, designed quantum circuit routing policies that reduce gate overhead by 24.5%, and discovered new Erdos minimum overlap constructions that surpass the best-known results. Beyond novel discoveries, SimpleTES produces trajectory-level histories that naturally supervise feedback-driven learning. When post-trained on successful trajectories, models not only improve efficiency on seen problems but also generalize to unseen problems, discovering solutions that base models fail to uncover. Together, our results establish effective evaluation-driven loop scaling as a central axis for advancing LLM-driven scientific discovery, and provide a simple yet practical framework for realizing these gains.

  • 25 authors
·
Apr 20 2

Residual Stream Duality in Modern Transformer Architectures

Recent work has made clear that the residual pathway is not mere optimization plumbing; it is part of the model's representational machinery. We agree, but argue that the cleanest way to organize this design space is through a two-axis view of the Transformer. A decoder evolves information along two ordered dimensions: sequence position and layer depth. Self-attention already provides adaptive mixing along the sequence axis, whereas the residual stream usually performs fixed addition along the depth axis. If we fix a token position and treat layer index as the ordered variable, then a causal depth-wise residual attention read is exactly the same local operator as causal short sliding-window attention (ShortSWA), except written over depth rather than over sequence. This is the core residual stream duality behind Transformer^2. This perspective also clarifies the recent literature. ELC-BERT and DenseFormer already show that learned aggregation over depth can outperform uniform residual accumulation, while Vertical Attention, DeepCrossAttention (DCA), MUDDFormer, and Attention Residuals move further toward explicit attention-based routing over earlier layers. The key point, however, is that operator-level duality does not imply systems-level symmetry. For large-scale autoregressive models, sequence-axis ShortSWA is usually the more hardware-friendly placement because it reuses token-side sliding-window kernels, KV-cache layouts, and chunked execution. If the goal is instead to change the shortcut itself, Deep Delta Learning (DDL) is the cleaner intervention because it modifies the residual operator directly rather than adding a separate cross-layer retrieval path. Our recommendation is therefore simple: use DDL when the shortcut is the object of interest, and use sequence-axis ShortSWA when the goal is local adaptive mixing.

math-ai math-ai
·
Mar 16 2

LT2: Linear-Time Looped Transformers

Looped Transformers (LT) have emerged as a powerful architecture by iterating their layers multiple times before decoding the final token. However, pairing them with full attention retains quadratic complexity, making them computationally expensive and slow. We introduce LT2 (Linear-Time Looped Transformers), a family of looped architectures that replace quadratic softmax attention with subquadratic, linear-time attention. We study two variants: LT2-linear with linear attention and LT2-sparse with sparse attention. We find that looping uniquely synergizes with these variants: it enables iterative memory refinement in linear attention and progressively expands the effective receptive field in sparse attention. We formalize these benefits theoretically and demonstrate consistent empirical gains across controlled recall, state-tracking, and language modeling tasks. We then explore LT2-hybrid, which combines different attention variants in a looped setting. Two variants are especially promising: LT2-hybrid (GDN+DSA), which interleaves linear and sparse attention to maximize efficiency and matches the standard looped transformer's quality at fully linear-time cost; and LT2-hybrid (Full+GDN), which interleaves GDN with a small fraction of full attention layers to maximize quality, surpassing the standard looped transformer in both performance and efficiency. We also show how to convert a pre-trained LT into an LT2-hybrid model. With about 1B tokens of training, our converted model, Ouro-hybrid-1.4B, outperforms industry-level 1B models and is competitive with industry-level 4B models while retaining the speed benefits of linear-time attention. Together, these results show a clear path toward making looped transformers more scalable and advancing efficient, capable small language models.

  • 7 authors
·
May 21

T-LoopFormer: Token-Level Elastic-Depth Looped Transformers for Latent Reasoning with Dynamic Routing

Looped Transformers have recently demonstrated strong performance in both reasoning and language tasks by reusing a shared set of parameters across multiple iterations, achieving parameter efficiency without sacrificing representational power. Besides, looped Transformers perform inference directly in the latent space (latent reasoning) to reduce the number of tokens consumed during inference, thereby achieving improved sample efficiency. However, these models typically apply a fixed recursion depth uniformly to every token, leading to suboptimal compute allocation and leaving significant efficiency gains on the table. In this work, we propose dynamic token-choice routing for looped transformers, enabling each token to adaptively determine its own number of loop iterations based on its hidden state, which can improve the token generation accuracy. Moreover, we further introduce recursion-wise KV cache, which maintains an independent key-value cache for each recursion loop, this design ensures that tokens at different depths only attend to their corresponding cached states, effectively enabling faster autoregressive decoding. Extensive experiments show that T-LoopFormer achieves robust performance on language modeling and zero-shot reasoning tasks and our model can reach the lowest decoding latency, which validate the effectiveness of token-choice router and recursion-wise KV cache. Code is available at https://github.com/YuMingQian1234/T-LoopFormer

  • 4 authors
·
Sep 24

LLM Interactive Optimization of Open Source Python Libraries -- Case Studies and Generalization

With the advent of large language models (LLMs) like GPT-3, a natural question is the extent to which these models can be utilized for source code optimization. This paper presents methodologically stringent case studies applied to well-known open source python libraries pillow and numpy. We find that contemporary LLM ChatGPT-4 (state September and October 2023) is surprisingly adept at optimizing energy and compute efficiency. However, this is only the case in interactive use, with a human expert in the loop. Aware of experimenter bias, we document our qualitative approach in detail, and provide transcript and source code. We start by providing a detailed description of our approach in conversing with the LLM to optimize the _getextrema function in the pillow library, and a quantitative evaluation of the performance improvement. To demonstrate qualitative replicability, we report further attempts on another locus in the pillow library, and one code locus in the numpy library, to demonstrate generalization within and beyond a library. In all attempts, the performance improvement is significant (factor up to 38). We have also not omitted reporting of failed attempts (there were none). We conclude that LLMs are a promising tool for code optimization in open source libraries, but that the human expert in the loop is essential for success. Nonetheless, we were surprised by how few iterations were required to achieve substantial performance improvements that were not obvious to the expert in the loop. We would like bring attention to the qualitative nature of this study, more robust quantitative studies would need to introduce a layer of selecting experts in a representative sample -- we invite the community to collaborate.

  • 1 authors
·
Dec 8, 2023

StellaVLA: In-Context Structured Demonstration for Generalizable Vision-Language-Action Models

Vision-Language-Action (VLA) models can follow instructions and manipulate objects, but their performance often collapses out of distribution (OOD), when the scene, viewpoint, or object differs from training. Adapting to each new situation typically requires collecting more data and fine-tuning. We present StellaVLA, a framework that instead adapts at test time by conditioning on a single retrieved demonstration. The key idea is to move beyond imitating what an expert did and instead convey why: an automated offline pipeline converts each raw trajectory into a structured demonstration, e.g., a task plan, sub-goal descriptions, and verbalized 3D motion, at zero human-annotation cost. Provided as in-context guidance, this structured demonstration lets the policy reason about the task rather than mimic a pixel trajectory, which also makes it transferable across embodiments (real-robot, human-hand, or XR demonstrations). A parallel dual-training design internalizes this reasoning during training through a joint action-and-language objective, while inference uses the action expert alone, preserving real-time, high-frequency control with no added latency. On the VLA-Arena leaderboard(Aug 1, 2026), StellaVLA ranks first with an overall score of 0.63, versus 0.44 and 0.22 for the strong prior models (π_{0.5} and LingBot-VLA), and it further leads on LIBERO with 98.8% average success rate and LIBERO-Plus with 85.1% success rate. Our real-robot benchmark demonstrates that StellaVLA can use both human/robot demos and human-to-robot (XR) demos as in-context structured demonstration to help VLA model adapt to OOD tasks.

  • 9 authors
·
Aug 11

DreamX-World 1.0: A General-Purpose Interactive World Model

DreamX-World 1.0 is a general-purpose interactive text/image-to-video world model for controllable long-horizon generation. It supports camera navigation, revisits to previously observed regions, and promptable events across photorealistic, game-style, and stylized domains. Our data engine combines camera-accurate Unreal Engine rendering, action-rich gameplay recordings, and real-world videos with recovered camera geometry. For camera control, we introduce E-PRoPE, a lightweight variant of projective positional encoding that retains PRoPE's projective camera geometry while applying camera-aware attention to spatially reduced tokens. We convert a bidirectional video generator into a few-step autoregressive world model using causal forcing, DMD-style distillation, and long-rollout training. Training on self-generated long-horizon contexts exposes the model to its own generated history and reduces the style and color drift that accumulates across autoregressive chunks. Memory-Conditioned Scene Persistence retrieves earlier views through camera-geometry-based retrieval, while residual recycling makes the conditioning path less sensitive to imperfect memory latents. Event Instruction Tuning adds composable event control, and reinforcement learning alignment recovers camera control and visual quality after distillation. With mixed-precision DiT execution, residual reuse, 75\%-pruned VAE decoding, and asynchronous pipeline parallelism, DreamX-World 1.0 reaches up to 16\,FPS on eight RTX\,5090 GPUs. On our 5-second basic evaluation, DreamX-World 1.0 achieves a camera-control score of 73.75 and an overall score of 84.76, outperforming HY-WorldPlay 1.5 and LingBot-World in overall score, which achieve 80.79 and 80.45, respectively.

GD-ML AMAP-ML
·
Jun 14 7

Looped Diffusion Language Models

Masked diffusion models (MDMs) have emerged as a promising alternative to autoregressive models for language modeling, yet the effective design of transformer architectures for MDMs remains underexplored. In this paper, we show that selectively looping the early-middle transformer layers significantly improves both training efficiency and model performance in MDMs. We call this approach LoopMDM(Looped Masked Diffusion Model), which brings two key benefits: looping layers at training-time yields a depth-scaling effect without adding parameters, while varying the number of loops at inference-time enables flexible compute scaling. Despite the simplicity, the results are striking: across multiple pre-training corpora, LoopMDM matches the performance of same-size MDMs with up to 3.3 fewer training FLOPs, while its final performance outperforms them on various reasoning benchmarks, including up to 8.5 points on GSM8K. It even surpasses deeper non-looped MDMs trained with comparable per-step compute, indicating that selective looping is more effective than naive depth scaling. Furthermore, LoopMDM can scale inference-time compute by increasing the number of loops. Adaptively adjusting the number of loops throughout the sampling process further yields additional gains in compute efficiency while maintaining performance. Lastly, with attention analysis, we provide evidence that looping is effective in MDMs by promoting interactions among masked positions. Our code and weights will be publicly released.

  • 6 authors
·
May 24

CADAQUES: A Cost-Aware Dual Architecture for Query-Efficient Autonomous Discovery

Autonomous discovery systems couple a resource that answers queries (a simulator, instrument, or analytic model) to an algorithm that selects what to query next. Most software frameworks for this loop inherit the control structure of numerical optimization: campaigns run for a fixed number of iterations, query costs are absent from the programming interface, and decision-making is treated as free. In practice, queries may differ in cost by orders of magnitude, and planners built on large language models or expensive surrogates consume resources of their own. Here we present CADAQUES, an open-source Python framework built on one architectural principle: cost is a first-class primitive of the discovery loop. CADAQUES separates the loop into two structural protocols, an Oracle that answers queries and a Driver that proposes them, and charges both evaluations and decisions against a common vector-valued budget spanning wall time, CPU hours, monetary cost, and language model tokens. An append-only ledger records, for each transaction, the cost declared before execution and the cost settled afterwards, making their discrepancy an observable property of the campaign. We evaluate the architecture by locating the critical temperature of the two-dimensional Ising model from noisy finite-size estimates against the exact thermodynamic-limit reference. In this noisy setting, strategies that concentrate around the best observed result can be misled by noise-induced peaks, whereas a schedule that explores with cheap low-fidelity queries and refines with higher-fidelity ones yields lower and less variable errors than high fidelity throughout, at the studied budget scale. Metering adds tens of microseconds per iteration, three orders of magnitude below the cheapest oracle query. The framework is MIT-licensed and archived at Zenodo (doi:10.5281/zenodo.21293589).

  • 1 authors
·
Jul 16

FASIONAD++ : Integrating High-Level Instruction and Information Bottleneck in FAt-Slow fusION Systems for Enhanced Safety in Autonomous Driving with Adaptive Feedback

Ensuring safe, comfortable, and efficient planning is crucial for autonomous driving systems. While end-to-end models trained on large datasets perform well in standard driving scenarios, they struggle with complex low-frequency events. Recent Large Language Models (LLMs) and Vision Language Models (VLMs) advancements offer enhanced reasoning but suffer from computational inefficiency. Inspired by the dual-process cognitive model "Thinking, Fast and Slow", we propose FASIONAD -- a novel dual-system framework that synergizes a fast end-to-end planner with a VLM-based reasoning module. The fast system leverages end-to-end learning to achieve real-time trajectory generation in common scenarios, while the slow system activates through uncertainty estimation to perform contextual analysis and complex scenario resolution. Our architecture introduces three key innovations: (1) A dynamic switching mechanism enabling slow system intervention based on real-time uncertainty assessment; (2) An information bottleneck with high-level plan feedback that optimizes the slow system's guidance capability; (3) A bidirectional knowledge exchange where visual prompts enhance the slow system's reasoning while its feedback refines the fast planner's decision-making. To strengthen VLM reasoning, we develop a question-answering mechanism coupled with reward-instruct training strategy. In open-loop experiments, FASIONAD achieves a 6.7% reduction in average L2 trajectory error and 28.1% lower collision rate.

  • 19 authors
·
Mar 11, 2025

One-Step Gradient Delay is Not a Barrier for Large-Scale Asynchronous Pipeline Parallel LLM Pretraining

Modern large-scale LLM pretraining benefits from utilizing Pipeline Parallelism; however, synchronous implementations leave GPUs idle during pipeline bubbles, wasting computational resources. Asynchronous Pipeline Parallelism eliminates these bubbles, maximizing throughput at the cost of gradient staleness. Among asynchronous schedules, PipeDream-2BW is particularly appealing: unlike the original PipeDream schedule, it ensures a constant one-step gradient delay regardless of pipeline depth. However, its adoption remains limited due to the common belief that optimizing under staleness is fundamentally unstable. In this work, we challenge this assumption, demonstrating that degradation under one-step delay depends strongly on optimizer choice rather than being an intrinsic limitation. We provide the first comprehensive empirical analysis showing that while AdamW, the predominant optimizer at the time when PipeDream-2BW was introduced, indeed suffers from severe degradation, recent methods like Muon exhibit strong robustness under a one-step delay. We introduce an optimizer-agnostic Error Feedback-inspired correction to further mitigate delay effects. We provide supporting theoretical analysis demonstrating convergence for Muon with and without this correction. Extensive evaluation on models up to 10B parameters confirms that our strategies bridge the performance gap with synchronous training, highlighting the practical potential of asynchronous pipeline parallelism at scale.

Retrofitting Recurrent Depth into a Pretrained Language Model: Installation, Extrapolation, Transfer, and Retention at Two Parameter Budgets

A dense, pretrained language model can be retrofitted with recurrent depth and learn an iterative latent transition that persists after outcome-only annealing. Qwen2.5-0.5B-Instruct is split into a Prelude, a weight-tied Recurrent Block, and a Coda, with an identity-preserving one-loop path and a re-entry bridge on later loops. At loop 1 the retrofit remains non-inferior to its base on a preregistered ARC battery. Three findings. First, the mechanism is a reusable procedure rather than terminal-answer lookup, and installs at two budgets: 6M trained parameters over frozen base weights and 180M full-block. With intermediate-step supervision, the model computes one task step per loop and persists when only final answers are graded. The adapter matched the full block overall (83.8% versus 84.0%), led through depth 11, and trailed beyond. Verbal fine-tuning reached 79-86% on controlled verbal renderings (zero-shot transfer was minimal), and adapter verbal training begun from the installed mechanism outpaced matched fresh training by 18.6 points, including on a held-out test set. Second, the operation extrapolates to roughly 1.5 times its supervised depth, holding 70% accuracy through depth 18. Third, a same-size scratchpad-trained model matched the recurrent model within its learned horizon but collapsed beyond it. The recurrent model won overall, 84% versus 72%, retained 53% versus 2.5% beyond depth 10, and answered 7.6 times faster. An iterative transformer can therefore perform deeper reasoning in latent space faster than comparable or larger models fine-tuned on the same task, in a system-level comparison. A second task, running the rule in reverse, exposed the limits: the inverse was learnable in isolation, but no continuation acquired it while preserving the installed mechanism and general capability, a catastrophic-interference boundary. Learned depth selection remains open.

  • 1 authors
·
Jul 30

Frontier-Eng: Benchmarking Self-Evolving Agents on Real-World Engineering Tasks with Generative Optimization

Current LLM agent benchmarks, which predominantly focus on binary pass/fail tasks such as code generation or search-based question answering, often neglect the value of real-world engineering that is often captured through the iterative optimization of feasible designs. To this end, we introduce Frontier-Eng, a human-verified benchmark for generative optimization -- an iterative propose-execute-evaluate loop in which an agent generates candidate artifacts, receives executable verifier feedback, and revises them under a fixed interaction budget -- spanning 47 tasks across five broad engineering categories. Unlike previous suites, Frontier-Eng tasks are grounded in industrial-grade simulators and verifiers that provide continuous reward signals and enforce hard feasibility constraints under constrained budgets. We evaluate eight frontier language models using representative search frameworks, finding that while Claude 4.6 Opus achieves the most robust performance, the benchmark remains challenging for all models. Our analysis suggests a dual power-law decay in improvement frequency (sim 1/iteration) and magnitude (sim 1/improvement count). We further show that although width improves parallelism and diversity, depth remains crucial for hard-won improvements under a fixed budget. Frontier-Eng establishes a new standard for assessing the capacity of AI agents to integrate domain knowledge with executable feedback to solve complex, open-ended engineering problems.

  • 21 authors
·
Apr 13

Looped State-Space Language Models with Adaptive Exit-State Selection

Recent work on looped language models suggests that many reasoning problems benefit from greater computational depth rather than from additional independent parameters. Existing studies, however, focus almost exclusively on Transformer backbones, leaving open whether this principle also applies to state-space language models. We investigate Looped Mamba and Looped Hybrid Mamba-Transformer architectures, which repeatedly apply a shared Mamba (or hybrid) block to introduce explicit finite-depth recurrent computation. On two controlled reasoning tasks-Mano (modular-arithmetic manipulation) and p-hop induction-Looped Mamba consistently outperforms parameter-matched non-looped baselines and, in several settings, matches or exceeds non-looped models of equal effective depth. We then extend the study to language model pre-training under matched iso-parameter and iso-FLOPs protocols, which jointly disentangle the effects of parameter sharing and effective depth: looped models remain competitive on downstream benchmarks with substantially fewer distinct parameters, although deeper non-looped models retain an advantage in validation perplexity under strict iso-FLOPs comparisons. Finally, we adapt Ouro's two-stage exit gate to Looped Mamba for threshold-controlled selection among recurrent-step outputs. Since all recurrent steps are still executed, the selected exit step represents prediction depth rather than reduced wall-clock computation. At the scales studied, adaptive exit-state selection improves downstream performance at intermediate depths, while actual inference-time savings require additional state-handling mechanisms.

  • 4 authors
·
Jul 10

Can Editing 1 Neuron Fix Repetition Loops in LLMs?

Yes. Can it cure doom loops? Probably not. The Gemma 4 instruction-tuned models share a reproducible failure: on long factual enumeration prompts, such as listing every episode of a TV series, the 88 IAU constellations, or the 151 original Pokemon, they collapse into repetition, either a tight verbatim loop or a list whose entries decay onto a single answer. These loops occur at rates as high as 95% and survive prompt rewording, inference-engine changes, and most sampling adjustments. In this paper we explore whether this behavior is localized enough to remove by weight edits. To localize the cause, we use per-layer ablation and per-neuron attribution, then confirm the strongest candidates with full-generation sweeps. The loops trace to a small set of MLP neurons (or, in the 26B-A4B Mixture-of-Experts model, a few routed experts) which we suppress with static weight edits. These "surgeries" can be as small as a single sign-inverted neuron (in the E2B model). The size of the effective edits grows with model scale, but in all cases, the loop patterns can be addressed at normal generation budgets while preserving general-purpose benchmark scores. However, the edits do not solve everything: we also study longer thinking budgets, where the two larger models most visibly enter doom looping, i.e. a non-convergent regime in which the model self-corrects in circles over a fact it cannot recall, exhausting the budget without committing to a final answer. We show this residual failure is reduced but not eliminated by the same edits, and argue it is fundamentally a knowledge-precision problem rather than a removable circuit; weight surgery can delete a loop, but it cannot supply a missing fact. Our results are both a feasibility demonstration, that is, evidence that a concrete generation pathology can be localized to a few parameters and edited out, and a delineation of where that approach stops.

  • 6 authors
·
Jun 8

DPC: Dual-Prompt Collaboration for Tuning Vision-Language Models

The Base-New Trade-off (BNT) problem universally exists during the optimization of CLIP-based prompt tuning, where continuous fine-tuning on base (target) classes leads to a simultaneous decrease of generalization ability on new (unseen) classes. Existing approaches attempt to regulate the prompt tuning process to balance BNT by appending constraints. However, imposed on the same target prompt, these constraints fail to fully avert the mutual exclusivity between the optimization directions for base and new. As a novel solution to this challenge, we propose the plug-and-play Dual-Prompt Collaboration (DPC) framework, the first that decoupling the optimization processes of base and new tasks at the prompt level. Specifically, we clone a learnable parallel prompt based on the backbone prompt, and introduce a variable Weighting-Decoupling framework to independently control the optimization directions of dual prompts specific to base or new tasks, thus avoiding the conflict in generalization. Meanwhile, we propose a Dynamic Hard Negative Optimizer, utilizing dual prompts to construct a more challenging optimization task on base classes for enhancement. For interpretability, we prove the feature channel invariance of the prompt vector during the optimization process, providing theoretical support for the Weighting-Decoupling of DPC. Extensive experiments on multiple backbones demonstrate that DPC can significantly improve base performance without introducing any external knowledge beyond the base classes, while maintaining generalization to new classes. Code is available at: https://github.com/JREion/DPC.

  • 6 authors
·
Mar 17, 2025

MobiAgent: Dual-Loop Recursive Policy Self-Improvement for Long-Horizon Mobile Manipulation

Long-horizon mobile manipulation presents significant challenges due to compounding execution errors and capacity interference between locomotion and arm control. While recent Vision-Language-Action models excel at short-horizon tasks, they lack the hierarchical reasoning required for multi-stage objectives. Furthermore, existing hierarchical agents suffer from rigid sub-task mapping, inflexible replanning, and a lack of continuous learning. To address these limitations, we introduce MobiAgent, a dual-loop agentic framework that bridges robust deployment execution and recursive policy self-improvement. During deployment, the Inner Loop decouples high-level reasoning from low-level control through highly composable atomic skills. It employs Vision-Language models for receding-horizon planning and visual reflection, dynamically composing skills to ensure robust error recovery. These skills are executed by specialized flow-matching experts that share a unified VLM backbone, maximizing reusability while mitigating capacity interference. Concurrently, the Outer Loop drives automated lifelong learning by autonomously segmenting and verifying deployment rollouts, clustering them to discover atomic skills, and continuously fine-tuning the skill library without human annotations. Evaluations on RoboCasa, BEHAVIOR-1K, and real-world tasks demonstrate the effectiveness of MobiAgent. It outperforms π_{0.5}-TA by 22.5 percentage points on BEHAVIOR-1K and enables robust recovery from execution failures. Through autonomous data recycling, success improves from 7.50% to 27.50% on RoboCasa and from 32.5% to 57.5% on Astribot S1.

  • 7 authors
·
Oct 1 1

SAIL: SRAM-Accelerated LLM Inference System with Lookup-Table-based GEMV

Large Language Model (LLM) inference requires substantial computational resources, yet CPU-based inference remains essential for democratizing AI due to the widespread availability of CPUs compared to specialized accelerators. However, efficient LLM inference on CPUs faces two fundamental challenges: (1) existing CPU architectures struggle with low-precision arithmetic required by quantized models, where optimal bit precision varies across models and layers; and (2) the memory-bound nature of the token generation phase creates severe performance bottlenecks. To address these challenges, we propose SAIL (SRAM-Accelerated Inference of LLMs), a CPU-based inference solution that efficiently supports arbitrary bit precisions with minimal overhead. SAIL integrates three key innovations: First, we introduce Batched LUT-based General Matrix-Vector Multiplication (LUT-GEMV) with SRAM-based processing-in-memory, enabling high data reuse through lookup tables and reducing memory movement. Second, our Pattern-Aware LUT optimization identifies and exploits redundancy in input activation patterns, reducing computation cycles by 13.8\%. Third, we develop an in-memory type conversion algorithm that leverages PIM's parallelism for efficient de-/quantization operations, alleviating pressure on CPU's vector units. Our architecture requires only 2\% hardware overhead and a single new instruction, while maintaining dual functionality as both compute and storage units. Experimental evaluations using a modified gem5 simulator demonstrate that SAIL achieves up to 10.7x speedup and 19.9x higher tokens per dollar compared to ARM Neoverse-N1 CPU baselines, and up to 7.04x better cost efficiency than NVIDIA V100 GPUs, establishing a practical path for efficient CPU-based LLM inference.

  • 4 authors
·
Sep 30, 2025

HybridFlow: A Flexible and Efficient RLHF Framework

Reinforcement Learning from Human Feedback (RLHF) is widely used in Large Language Model (LLM) alignment. Traditional RL can be modeled as a dataflow, where each node represents computation of a neural network (NN) and each edge denotes data dependencies between the NNs. RLHF complicates the dataflow by expanding each node into a distributed LLM training or generation program, and each edge into a many-to-many multicast. Traditional RL frameworks execute the dataflow using a single controller to instruct both intra-node computation and inter-node communication, which can be inefficient in RLHF due to large control dispatch overhead for distributed intra-node computation. Existing RLHF systems adopt a multi-controller paradigm, which can be inflexible due to nesting distributed computation and data communication. We propose HybridFlow, which combines single-controller and multi-controller paradigms in a hybrid manner to enable flexible representation and efficient execution of the RLHF dataflow. We carefully design a set of hierarchical APIs that decouple and encapsulate computation and data dependencies in the complex RLHF dataflow, allowing efficient operation orchestration to implement RLHF algorithms and flexible mapping of the computation onto various devices. We further design a 3D-HybridEngine for efficient actor model resharding between training and generation phases, with zero memory redundancy and significantly reduced communication overhead. Our experimental results demonstrate 1.53times~20.57times throughput improvement when running various RLHF algorithms using HybridFlow, as compared with state-of-the-art baselines. HybridFlow source code will be available at https://github.com/volcengine/verl.

  • 9 authors
·
Sep 28, 2024 1