Datasets:
prompt stringlengths 562 1.97k | completion stringlengths 5 204 |
|---|---|
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [12, 14, 17, 18, 19, 21, 25, 26], "zero": ["12:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [20], "zero": ["25:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": ["126:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [6, 30, 44, 46, 66, 89, 95, 142], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [29, 30, 33, 37, 38, 41, 43, 47], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [85], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [31, 33, 34, 35, 41, 44, 45, 47], "zero": ["35:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [103, 136], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [100, 106], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [7, 21, 44, 61, 69, 91, 101, 119], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [146], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [10, 29, 84], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [39, 107, 112, 116, 119, 131, 151, 153], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [84, 88, 97, 117, 119, 120, 122, 124], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [50], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [12, 14, 50, 61, 71, 92, 133, 147], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [17, 30, 37, 61, 87, 100, 133, 134], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [113, 115], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | BELOW |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [2], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [57], "zero": ["29:prob_meas1_prep0", "43:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [23, 26, 45, 49, 59, 73, 74, 147], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [123], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [49, 118], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [10, 11, 14, 16, 18, 19, 21, 25], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | ABOVE |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": ["55:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [23, 30, 54, 67, 81, 115, 144, 152], "zero": ["115:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [0, 1, 2, 12, 14, 20, 22, 24], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CONSISTENT |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [1, 4, 11, 27, 43, 58, 105, 133], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CONSISTENT |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": ["39:prob_meas1_prep0"]} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CONSISTENT |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [12, 27, 47, 70, 88, 125, 132, 140], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [29, 71, 93, 100, 107, 133, 138, 148], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [1, 25, 26, 31, 34, 92, 113, 118], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [16, 22, 35, 56, 64, 80, 110, 146], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [96, 100, 102, 103, 104, 105, 106, 108], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [27, 46], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [2, 51, 89, 125], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | BELOW |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [5, 15, 52, 92, 110, 111, 136, 145], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [11, 56, 78, 88, 91, 111, 129, 140], "zero": ["91:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [135, 140, 143, 145, 146, 148, 151, 153], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [116], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [17, 30, 37, 61, 100, 133, 134, 152], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [0, 13, 36, 54, 75, 105, 107, 134], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [109, 118, 119, 120, 122, 124, 125, 127], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [27, 71, 105], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | BELOW |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CANNOT_TELL |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [57], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [63, 66, 70, 109, 142], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [100], "zero": ["16:prob_meas1_prep0"]} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | BELOW |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [10, 96, 116], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [2], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | CONSISTENT |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [0, 26, 40, 118, 138], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [101], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | ABOVE |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": ["129:prob_meas1_prep0"]} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [5, 14, 134, 139, 148, 153, 154, 155], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You give a verdict on a measured value against a stated reference. Apply this rule in this order: ABOVE if the low end of the interval is above the reference; BELOW if the high end of the interval is below the reference; CONSISTENT if the whole interval lies within the reference plus or minus the margin; otherwise CANN... | ABOVE |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [70, 71, 74, 77, 80, 81, 83, 88], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [4, 20, 29, 38, 48, 66, 108, 120], "zero": []} |
You audit IBM quantum calibration records. Flag (1) "stale": qubits whose T1 or T2 measurement date is more than 24 hours before the record's last-calibration stamp; (2) "zero": qubit:field pairs whose error value is exactly 0. Answer only JSON: {"stale": [qubit numbers], "zero": ["q:field", ...]}, lists sorted.
Backen... | {"stale": [], "zero": []} |
YO Training Data
Everything behind indahl/YO: the data every version from v2 to v8 was trained and tested on, each version's test rows, the plan committed before each run, and every live read YO has made of a new IBM calibration record.
YO is Qwen3-1.7B (Apache-2.0) trained with LoRA on IBM's own published qubit calibration history. For each record it flags qubits whose T1 or T2 was measured more than a day before the record's stamp, and error values of exactly zero. Code computes the right answer from the same record, and both are kept side by side.
Files
data_v2todata_v8: train and test items for each version, built from IBM's public calibration records.future_items.jsonlholds the later records each version was tested on.manifests/: sha256 of every data file and adapter, committed before training (DATA_YO_V*.sha256,ADAPTERS_YO_V*.sha256).plans/: the plan for each version, committed before its data was built.eval/: every test row for every version and baseline (date rule, nothing, oracle, base model).live/live_reads.jsonl: YO's reads of each new IBM record since 1 Nov 2026 (2521 rows), with the code's answer and a score (1.0 means YO's flags matched the code exactly). Model v4 made the first reads, v7 the rest.
Version 1 is not included.
Terms
The calibration values are IBM's published records and keep IBM's terms. Heuremen LLC's own parts (the item construction, plans, scores and this README) may be used with attribution to Heuremen LLC and https://indahl.ai/yo.
Heuremen LLC, https://indahl.ai
- Downloads last month
- 56