| ## DCHDMI LED status patterns | |
| *LED status is only available, when `Opt. reset mode` in Web console `setup` is set to `led` (which is the default)* | |
| #### **LED off** | |
| No power to DCHDMI or FPGA configuration is corrupt. | |
| *If the FPGA configuration has been corrupted, just wait for 2 minutes, as it will be reflashed by the ESP.* | |
| #### **LED dim on** | |
| No clock from Dreamcast. | |
| *Check connection to `VCLK`* | |
| #### **LED rapid blinking** | |
| No proper sync signal is detected (It's normal to see this at startup/reset) | |
| *Check connections to `VSYNC` and `HSYNC`* | |
| #### **LED slow glow** | |
| Dreamcast clock and sync signals are fine, no cable plugged into HDMI port. | |
| *Plug in HDMI cable or replace with another cable* | |
| #### **LED fully on** | |
| Normal operation. | |
| #### **LED rapid intermittent blinking** | |
| Indicates video test pattern generation when in test jig. The `generate_on` console command does not trigger this status. | |
| --- | |
|  |