Get trending papers in your email inbox once a day!
Get trending papers in your email inbox!
SubscribeSuperconducting Diode Effect due to the Inverse Spin Hall Effect in Josephson Junctions with Extrinsic Spin-Orbit Interaction
The spin density and Josephson current at equilibrium are studied numerically in a superconductor-normal metal-superconductor (SNS) junction with extrinsic spin-orbit interaction in the N segment. This system preserves structural inversion symmetry. We find that the Josephson current generates the spin Hall effect, resulting in an opposite spin density near the two edges of the N segment. We also find that a Zeeman magnetic field with gradient applied to the N segment generates an anomalous phase shift due to the inverse spin Hall effect, resulting in a diode effect when higher harmonics of the Josephson current are present. These results are consistent with those of a previous theoretical study based on diagrammatic perturbation theory. We find that the diode effect becomes more pronounced when stronger coupling between the N and S segments enhances the higher harmonics.
Twist-angle tunable Josephson junctions in three-dimensional superconductors
We theoretically investigate the superconducting phase and perpendicular Josephson supercurrent in twisted three-dimensional (3D) superconductors, where two layered 3D materials are stacked with a relative twist. We formulate the Bogoliubov-de Gennes Hamiltonian and develop a self-consistent method to calculate the superconducting order parameter and the resulting supercurrent. Applying this framework to a toy model with Fermi surfaces located near the Brillouin zone corners, we demonstrate a phase discontinuity at the twisted interface, indicating that a Josephson junction is formed purely by the twist. Our calculations reveal that the interface supports a finite critical current even when the Fermi surfaces of the two superconductors are completely separated, unlike in the case of a twisted normal-metal interface. We further show that the critical current can be effectively controlled by the twist angle, transitioning from a high-transparency regime at small angles to a low-transparency regime at larger angles.
Agentic Fusion of Large Atomic and Language Models to Accelerate Superconductors Discovery
The discovery of novel materials is critical for global energy and quantum technology transitions. While deep learning has fundamentally reshaped this landscape, existing predictive or generative models typically operate in isolation, lacking the autonomous orchestration required to execute the full discovery process. Here we present ElementsClaw, an agentic framework for materials discovery that synergizes Large Atomic Models (LAMs) with Large Language Models (LLMs). In response to varied human queries, ElementsClaw orchestrates a suite of LAM tools finetuned from our proposed 1-billion-parameter model Elements for atomic-scale numerical computation, while leveraging LLMs for high-level semantic reasoning. This shift moves AI-driven materials science from isolated processes toward integrated and human interactive discovery. Applied to superconductors, ElementsClaw screens 2.4 million crystals in just 28 GPU hours to identify 68,000 high-confidence candidates (The complete dataset of screened superconductors is available at https://developer.damo-academy.com/material), expanding known superconducting space by orders of magnitude compared to datasets curated over decades. Critically, ElementsClaw achieves a high success rate in identifying superconductors hidden in literature and discovers four novel experimentally verified superconductors, exemplified by Zr3ScRe8 with a transition temperature of 6.8 K and HfZrRe4 at 6.7 K. Together, our results establish a knowledge integrated, autonomously orchestrated, and experimentally grounded paradigm for materials discovery.
From two dimensions to wire networks in a dice-lattice Josephson array
We investigate Josephson arrays consisting of a dice-lattice network of superconducting weak links surrounding rhombic plaquettes of proximitized semiconductor. Josephson coupling of the weak links and electron density in the plaquettes are independently controlled by separate electrostatic gates. Applied magnetic flux results in an intricate pattern of switching currents associated with frustration, f. For depleted plaquettes, the switching current is nearly periodic in f, expected for a phase-only description, while occupied plaquettes yield a decreasing envelope of switching currents with increasing f. A model of flux dependence based on ballistic small-area junctions and diffusive large-area plaquettes yields excellent agreement with experiment.
Theory of Josephson current on a lattice model of grain boundary in d-wave superconductors
Identifying the origins of suppression of the critical current at grain boundaries of high-critical-temperature superconductors, such as cuprates and iron-based superconductors, is a crucial issue to be solved for future applications with polycrystalline materials. Although the dominant factor of current suppression might arise during material fabrication and/or processing, investigating it due to an internal phase change of the pair potential is an important issue in understanding the threshold of the critical current. In this paper, we study the Josephson current on a symmetric [001]-tilt grain boundary (GB) of a d-wave superconductor on a lattice model. In addition to the suppression of the maximum Josephson current associated with the internal phase change of the d-wave pair potential which has been predicted in continuum models, we find a unique phase interference effect due to folding of the Fermi surface in the lattice model. In particular, the resultant maximum Josephson current at low-tilting-angle regions tends to be suppressed more than that in preexisting theories. Because similar suppressions of the critical current at GBs have been reported in several experimental works, the present model can serve as a guide to clarify the complicated transport mechanism in GBs.
Current-phase relation of a WTe2 Josephson junction
When a topological insulator is incorporated into a Josephson junction, the system is predicted to reveal the fractional Josephson effect with a 4π-periodic current-phase relation. Here, we report the measurement of a 4π-periodic switching current through an asymmetric SQUID, formed by the higher-order topological insulator WTe_2. Contrary to the established opinion, we show that a high asymmetry in critical current and negligible loop inductance are not sufficient by themselves to reliably measure the current-phase relation. Instead, we find that our measurement is heavily influenced by additional inductances originating from the self-formed PdTe_{x} inside the junction. We therefore develop a method to numerically recover the current-phase relation of the system and find the 1.5,μm long junction to be best described in the short ballistic limit. Our results highlight the complexity of subtle inductance effects that can give rise to misleading topological signatures in transport measurements.
Theory of superconducting proximity effect in hole-based hybrid semiconductor-superconductor devices
Hybrid superconductor-semiconductor systems have received a great deal of attention in the last few years because of their potential for quantum engineering, including novel qubits and topological devices. The proximity effect, the process by which the semiconductor inherits superconducting correlations, is an essential physical mechanism of such hybrids. Recent experiments have demonstrated the proximity effect in hole-based semiconductors, but, in contrast to electrons, the precise mechanism by which the hole bands acquire superconducting correlations remains an open question. In addition, hole spins exhibit a complex strong spin-orbit interaction, with largely anisotropic responses to electric and magnetic fields, further motivating the importance of understanding the interplay between such effects and the proximity effect. In this work, we analyze this physics with focus on germanium-based two-dimensional gases. Specifically, we develop an effective theory supported by full numerics, allowing us to extract various analytical expressions and predict different types of superconducting correlations including non-standard forms of singlet and triplet pairing mechanisms with non-trivial momentum dependence; as well as different Zeeman and Rashba spin-orbit contributions. This, together with their precise dependence on electric and magnetic fields, allows us to make specific experimental predictions, including the emergence of f-type superconductivity, Bogoliubov Fermi surfaces, and gapless regimes caused by large in-plane magnetic fields.
Strong pairing and symmetric pseudogap metal in double Kondo lattice model: from nickelate superconductor to tetralayer optical lattice
In this work, we propose and study a double Kondo lattice model which hosts robust superconductivity. The system consists of two identical Kondo lattice model, each with Kondo coupling J_K within each layer, while the localized spin moments are coupled together via an inter-layer on-site antiferromagnetic spin coupling J_perp. We consider the strong J_perp limit, wherein the local moments tend to form rung singlets and are thus gapped. However, the Kondo coupling J_K transmits the inter-layer entanglement between the local moments to the itinerant electrons. Consequently, the itinerant electrons experience a strong inter-layer antiferromangetic spin coupling and form strong inter-layer pairing, which is confirmed through numerical simulation in one dimensional system. Experimentally, the J_K rightarrow -infty limits of the model describes the recently found bilayer nickelate La_3Ni_2O_7, while the J_K>0 side can be realized in tetralayer optical lattice of cold atoms. Two extreme limits, J_K rightarrow -infty and J_K rightarrow +infty limit are shown to be simplified to a bilayer type II t-J model and a bilayer one-orbital t-J model, respectively. Thus, our double Kondo lattice model offers a unified framework for nickelate superconductor and tetralayer optical lattice quantum simulator upon changing the sign of J_K. We highlight both the qualitative similarity and the quantitative difference in the two sides of J_K. Finally, we discuss the possibility of a symmetric Kondo breakdown transition in the model with a symmetric pseudogap metal corresponding to the usual heavy Fermi liquid.
Novel results obtained by modeling of dynamic processes in superconductors: phase-slip centers as cooling engines
Based on a time-dependent Ginzburg-Landau system of equations and finite element modeling, we present novel results related with the physics of phase-slippage in superconducting wires surrounded by a non-superconductive environment. These results are obtained within our previously reported approach related to superconducting rings and superconductive gravitational wave detector transducers. It is shown that the phase-slip centers (PSCs) can be effective in originating not only positive but also negative thermal fluxes. With an appropriate design utilizing thermal diodes, PSCs can serve as cryocooling engines. Operating at Tsim 1 K cryostat cold-finger, they can achieve sub-Kelvin temperatures without using ^3He.
Microwave-assisted tunneling and interference effects in superconducting junctions under fast driving signals
As scanning tunneling microscopy is pushed towards fast local dynamics, a quantitative understanding of tunnel junctions under the influence of a fast AC driving signal is required, especially at the ultra-low temperatures relevant to spin dynamics and correlated electron states. We subject a superconductor-insulator-superconductor junction to a microwave signal from an antenna mounted in situ and examine the DC response of the contact to this driving signal. Quasi-particle tunneling and the Josephson effect can be interpreted in the framework of Tien-Gordon theory. The situation is more complex when it comes to higher order effects such as multiple Andreev reflections. Microwave assisted tunneling unravel these complex processes, providing deeper insights into tunneling than are available in a pure DC measurement.
On the Electron Pairing Mechanism of Copper-Oxide High Temperature Superconductivity
The elementary CuO2 plane sustaining cuprate high-temperature superconductivity occurs typically at the base of a periodic array of edge-sharing CuO5 pyramids. Virtual transitions of electrons between adjacent planar Cu and O atoms, occurring at a rate t/{hbar} and across the charge-transfer energy gap E, generate 'superexchange' spin-spin interactions of energy Japprox4t^4/E^3 in an antiferromagnetic correlated-insulator state. However, Hole doping the CuO2 plane converts this into a very high temperature superconducting state whose electron-pairing is exceptional. A leading proposal for the mechanism of this intense electron-pairing is that, while hole doping destroys magnetic order it preserves pair-forming superexchange interactions governed by the charge-transfer energy scale E. To explore this hypothesis directly at atomic-scale, we combine single-electron and electron-pair (Josephson) scanning tunneling microscopy to visualize the interplay of E and the electron-pair density nP in {Bi_2Sr_2CaCu_2O_{8+x}}. The responses of both E and nP to alterations in the distance {\delta} between planar Cu and apical O atoms are then determined. These data reveal the empirical crux of strongly correlated superconductivity in CuO2, the response of the electron-pair condensate to varying the charge transfer energy. Concurrence of predictions from strong-correlation theory for hole-doped charge-transfer insulators with these observations, indicates that charge-transfer superexchange is the electron-pairing mechanism of superconductive {Bi_2Sr_2CaCu_2O_{8+x}}.
Exact Solution of the Frustrated Potts Model with Next-Nearest-Neighbor Interactions in One Dimension: An AI-Aided Discovery
The one-dimensional J_1-J_2 q-state Potts model is solved exactly for arbitrary q, based on using OpenAI's latest reasoning model o3-mini-high to exactly solve the q=3 case. The exact results provide insights to outstanding physical problems such as the stacking of atomic or electronic orders in layered materials and the formation of a T_c-dome-shaped phase often seen in unconventional superconductors. The work is anticipated to fuel both the research in one-dimensional frustrated magnets for recently discovered finite-temperature application potentials and the fast moving topic area of AI for sciences.
Composite stacks for reliable > 17 T trapped fields in bulk superconductor magnets
Trapped fields of over 20 T are, in principle, achievable in bulk, single-grain high temperature cuprate superconductors. The principle barriers to realizing such performance are, firstly, the large tensile stresses that develop during the magnetization of such trapped-field magnets as a result of the Lorentz force, which lead to brittle fracture of these ceramic-like materials at high fields and, secondly, catastrophic thermal instabilities as a result of flux movement during magnetization. Moreover, for a batch of samples nominally fabricated identically, the statistical nature of the failure mechanism means the best performance (i.e. trapped fields of over 17 T) cannot be attained reliably. The magnetization process, particularly to higher fields, also often damages the samples such that they cannot repeatedly trap high fields following subsequent magnetization. In this study, we report the sequential trapping of magnetic fields of ~ 17 T, achieving 16.8 T at 26 K initially and 17.6 T at 22.5 K subsequently, in a stack of two Ag-doped GdBa2Cu3O7-δ bulk superconductor composites of diameter 24 mm reinforced with (1) stainless-steel laminations, and (2) shrink-fit stainless steel rings. A trapped field of 17.6 T is, in fact, comparable with the highest trapped fields reported to date for bulk superconducting magnets of any mechanical and chemical composition, and this was achieved using the first composite stack to be fabricated by this technique.
Strong correlation behavior and Strong coupling superconductivity in (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix with the rich magnetic element Ni
Searching for new superconductors, especially unconventional superconductors, has been studied extensively for decades but remains one of the major outstanding challenges in condensed matter physics. Medium/high-entropy alloys (MEAs-HEAs) are new fertile soils of unconventional superconductors and generate widespread interest and questions on the existence of superconductivity in highly disordered materials. Here, we report on the effect of Ni-doped on the crystal structure and superconductivity properties of strongly coupled TiHfNbTa MEA. XRD results indicate that the maximum solid solution of (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix is about 7.7%. Resistivity, magnetic susceptibility, and specific heat measurements demonstrated that (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEAs are all bulk type-II superconductors and follow the trend of the increase of Tc with the increase of Ni-doped contents. The specific heat jump of all (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix are much larger than the BCS value of 1.43, suggesting all these HEAs are strongly coupled superconductors. Additionally, large Kadawaki-Woods ratio values suggest that there is a strong electron correlation effect in this system. The (Ti1/4Hf1/4Nb1/4Ta1/4)1-xNix HEA system is a new ideal material platform for the study of strong correlation behavior and strongly coupled superconductivity, which provides an insight into the physics of high-temperature superconductors or other unconventional superconductors.
The First Room-Temperature Ambient-Pressure Superconductor
For the first time in the world, we succeeded in synthesizing the room-temperature superconductor (T_c ge 400 K, 127^circC) working at ambient pressure with a modified lead-apatite (LK-99) structure. The superconductivity of LK-99 is proved with the Critical temperature (T_c), Zero-resistivity, Critical current (I_c), Critical magnetic field (H_c), and the Meissner effect. The superconductivity of LK-99 originates from minute structural distortion by a slight volume shrinkage (0.48 %), not by external factors such as temperature and pressure. The shrinkage is caused by Cu^{2+} substitution of Pb^{2+}(2) ions in the insulating network of Pb(2)-phosphate and it generates the stress. It concurrently transfers to Pb(1) of the cylindrical column resulting in distortion of the cylindrical column interface, which creates superconducting quantum wells (SQWs) in the interface. The heat capacity results indicated that the new model is suitable for explaining the superconductivity of LK-99. The unique structure of LK-99 that allows the minute distorted structure to be maintained in the interfaces is the most important factor that LK-99 maintains and exhibits superconductivity at room temperatures and ambient pressure.
SQuADDS: A validated design database and simulation workflow for superconducting qubit design
We present an open-source database of superconducting quantum device designs that may be used as the starting point for customized devices. Each design can be generated programmatically using the open-source Qiskit Metal package, and simulated using finite-element electromagnetic solvers. We present a robust workflow for achieving high accuracy on design simulations. Many designs in the database are experimentally validated, showing excellent agreement between simulated and measured parameters. Our database includes a front-end interface that allows users to generate ``best-guess'' designs based on desired circuit parameters. This project lowers the barrier to entry for research groups seeking to make a new class of devices by providing them a well-characterized starting point from which to refine their designs.
Matters Arising from S. Vaitiekenas et al., "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires" Nature Physics 2021
In 2021 Nature Physics published a paper by Vaitiekenas, Liu, Krogstrup and Marcus titled "Zero-bias peaks at zero magnetic field in ferromagnetic hybrid nanowires". The paper reports low temperature transport measurements on semiconductor InAs nanowires with two partly overlapping shells -- a shell of EuS, a magnetic insulator, and a shell of Al, a metal that becomes superconducting at temperatures below 1.2K. The paper claims that (1) the data are consistent with induced topological superconductivity and Majorana zero modes (MZMs), and (2) that this is facilitated by the breaking of the time reversal symmetry through a direct magnetic interaction with the EuS shell. In this Matters Arising, we present an alternative explanation which is based on trivial effects that are likely to appear in the reported geometry. Specifically, first, we find that data the authors present in support of the topological superconductivity claim can originate from unintended quantum dots in their devices, a widely known likely explanation that is not being discussed in the paper. Second, our analysis of the setup, supported by our numerical micromagnetic simulations, shows similar effects could be obtained due to stray magnetic fields from the region of the EuS shell damaged during Al etching. This basic picture should come before the exotic interpretation in terms of magnetic exchange interaction with a ferromagnetic insulator.
A review of Fe-chalcogenide superconductors: the simplest Fe-based superconductor
Here we summarize the physical properties of the newly discovered Fe-chalcogenide superconductors. The Fe-chalcogenide superconductors attract us as the simplest Fe-based superconductors. Furthermore, Fe chalcogenides show a huge pressure effect on their superconducting properties. The origin of the high transition temperature was discussed with both the change in crystal structure and magnetism. The progress on the thin-film and superconducting-wire fabrications are also described.
Deep Neuromorphic Networks with Superconducting Single Flux Quanta
Conventional semiconductor-based integrated circuits are gradually approaching fundamental scaling limits. Many prospective solutions have recently emerged to supplement or replace both the technology on which basic devices are built and the architecture of data processing. Neuromorphic circuits are a promising approach to computing where techniques used by the brain to achieve high efficiency are exploited. Many existing neuromorphic circuits rely on unconventional and useful properties of novel technologies to better mimic the operation of the brain. One such technology is single flux quantum (SFQ) logic -- a cryogenic superconductive technology in which the data are represented by quanta of magnetic flux (fluxons) produced and processed by Josephson junctions embedded within inductive loops. The movement of a fluxon within a circuit produces a quantized voltage pulse (SFQ pulse), resembling a neuronal spiking event. These circuits routinely operate at clock frequencies of tens to hundreds of gigahertz, making SFQ a natural technology for processing high frequency pulse trains. Prior proposals for SFQ neural networks often require energy-expensive fluxon conversions, involve heterogeneous technologies, or exclusively focus on device level behavior. In this paper, a design methodology for deep single flux quantum neuromorphic networks is presented. Synaptic and neuronal circuits based on SFQ technology are presented and characterized. Based on these primitives, a deep neuromorphic XOR network is evaluated as a case study, both at the architectural and circuit levels, achieving wide classification margins. The proposed methodology does not employ unconventional superconductive devices or semiconductor transistors. The resulting networks are tunable by an external current, making this proposed system an effective approach for scalable cryogenic neuromorphic computing.
Superconducting Materials for Microwave Kinetic Inductance Detectors
The superconducting materials that make up an MKID have a significant effect on its performance. The T_c and normal state resistivity ρ_N of the film determine the penetration depth λ and therefore how much kinetic inductance it has. The ratio of kinetic inductance to total inductance (α), the volume of the inductor, and Q_m determines the magnitude of the response to incoming energy. The quasiparticle lifetime τ_qp is the characteristic time during which the MKID's surface impedance is modified by the incoming energy. Many materials have been explored for use in superconducting resonators and MKIDs, but that information is often not published or scattered around the literature. This chapter contains information and references on the work that has been done with thin film lithographed circuits for MKIDs over the last two decades. Note that measured material properties such as the internal loss quality factor Q_i and quasiparticle lifetime τ_qp vary significantly depending on how the MKID superconducting thin film is made and the system they are measured in, so it is best to interpret all stated values as typical but not definitive. Values are omitted in cases when there aren't enough measurements or there is too much disagreement in the literature to estimate a typical value. In order to be as complete as possible some unpublished results from the author's lab are included and can be identified by the lack of a reference. Unless noted all films are polycrystalline or amorphous.
Coupling spin qubits via superconductors
We show how superconductors can be used to couple, initialize, and read out spatially separated spin qubits. When two single-electron quantum dots are tunnel coupled to the same superconductor, the singlet component of the two-electron state partially leaks into the superconductor via crossed Andreev reflection. This induces a gate-controlled singlet-triplet splitting which, with an appropriate superconductor geometry, remains large for dot separations within the superconducting coherence length. Furthermore, we show that when two double-dot singlet-triplet qubits are tunnel coupled to a superconductor with finite charging energy, crossed Andreev reflection enables a strong two-qubit coupling over distances much larger than the coherence length.
Thermodynamic parameters of atomically thin superconductors derived from the upper critical field
The amplitude of ground state superconducting energy gap Δ(0) and relative jump in electronic specific heat at the transition temperature, ΔC{/}γT_c, are primary fundamental parameters of any superconductor. There are several well-established techniques to measure these values for bulk samples. However, there is limited number of techniques which can be applied to measure these parameters in atomically thin superconductors. Here we proposed a new approach to extract Δ(0) and ΔC{/}γT_c in atomically thin superconductors by utilizing perpendicular, Bc2,perp(T) (when magnetic field is applied in perpendicular direction to the film surface), and parallel, Bc2,||(T) (when magnetic field is applied in parallel direction to the film surface), upper critical field data. Deduced parameters for few layers thick Al, Sn, NbSe2, MoS2, magic angle twisted trilayer graphene (MATTG), and WTe2 are well matched values expected for strong- and moderately strong-coupled electron-phonon mediated superconductors. Observed, in many atomically thin superconductors, an enhancement of Bc2,||(0) above the Pauli-Clogston-Chandrasekhar limiting field (i.e., magnetic field required to break the Cooper pair) is explained based on the sample geometry, without an assumption that some exotic pairing mechanism, for instance, Ising-type, is emergent in these materials.
Unconventional superconductivity from lattice quantum disorder
Unconventional superconductivity presents a defining and enduring challenge in condensed matter physics. Prevailing theoretical frameworks have predominantly emphasized electronic degrees of freedom, largely neglecting the rich physics inherent in the lattice. Although conventional phonon theory offers an elegant description of structural phase diagrams and lattice dynamics, its omission of nuclear quantum many-body effects results in misleading phase diagram interpretations and, consequently, an unsound foundation for superconducting theory. Here, by incorporating nuclear quantum many-body effects within first-principles calculations, we discover a lattice quantum disordered phase in superconductors H3S and La3Ni2O7. This phase occupies a triangular region in the pressure-temperature phase diagram, whose left boundary aligns precisely with Tc of the left flank of the superconducting dome. The Tcmax of this quantum disordered phase coincides with the maximum of superconducting Tc, indicating this phase as both the origin of superconductivity on the dome's left flank and a key ingredient of its pairing mechanism. Our findings advance the understanding of high-temperature superconductivity and establish the lattice quantum disordered phase as a unifying framework, both for predicting new superconductors and for elucidating phenomena in a broader context of condensed matter physics.
Accelerating the Search for Superconductors Using Machine Learning
Prediction of critical temperature (T_c) of a superconductor remains a significant challenge in condensed matter physics. While the BCS theory explains superconductivity in conventional superconductors, there is no framework to predict T_c of unconventional, higher T_{c} superconductors. Quantum Structure Diagrams (QSD) were successful in establishing structure-property relationship for superconductors, quasicrystals, and ferroelectric materials starting from chemical composition. Building on the QSD ideas, we demonstrate that the principal component analysis of superconductivity data uncovers the clustering of various classes of superconductors. We use machine learning analysis and cleaned databases of superconductors to develop predictive models of T_c of a superconductor using its chemical composition. Earlier studies relied on datasets with inconsistencies, leading to suboptimal predictions. To address this, we introduce a data-cleaning workflow to enhance the statistical quality of superconducting databases by eliminating redundancies and resolving inconsistencies. With this improvised database, we apply a supervised machine learning framework and develop a Random Forest model to predict superconductivity and T_c as a function of descriptors motivated from Quantum Structure Diagrams. We demonstrate that this model generalizes effectively in reasonably accurate prediction of T_{c} of compounds outside the database. We further employ our model to systematically screen materials across materials databases as well as various chemically plausible combinations of elements and predict Tl_{5}Ba_{6}Ca_{6}Cu_{9}O_{29} to exhibit superconductivity with a T_{c} sim 105 K. Being based on the descriptors used in QSD's, our model bypasses structural information and predicts T_{c} merely from the chemical composition.
Designing High-Tc Superconductors with BCS-inspired Screening, Density Functional Theory and Deep-learning
We develop a multi-step workflow for the discovery of conventional superconductors, starting with a Bardeen Cooper Schrieffer inspired pre-screening of 1736 materials with high Debye temperature and electronic density of states. Next, we perform electron-phonon coupling calculations for 1058 of them to establish a large and systematic database of BCS superconducting properties. Using the McMillan-Allen-Dynes formula, we identify 105 dynamically stable materials with transition temperatures, Tc>5 K. Additionally, we analyze trends in our dataset and individual materials including MoN, VC, VTe, KB6, Ru3NbC, V3Pt, ScN, LaN2, RuO2, and TaC. We demonstrate that deep-learning(DL) models can predict superconductor properties faster than direct first principles computations. Notably, we find that by predicting the Eliashberg function as an intermediate quantity, we can improve model performance versus a direct DL prediction of Tc. We apply the trained models on the crystallographic open database and pre-screen candidates for further DFT calculations.
HTSC-2025: A Benchmark Dataset of Ambient-Pressure High-Temperature Superconductors for AI-Driven Critical Temperature Prediction
The discovery of high-temperature superconducting materials holds great significance for human industry and daily life. In recent years, research on predicting superconducting transition temperatures using artificial intelligence~(AI) has gained popularity, with most of these tools claiming to achieve remarkable accuracy. However, the lack of widely accepted benchmark datasets in this field has severely hindered fair comparisons between different AI algorithms and impeded further advancement of these methods. In this work, we present the HTSC-2025, an ambient-pressure high-temperature superconducting benchmark dataset. This comprehensive compilation encompasses theoretically predicted superconducting materials discovered by theoretical physicists from 2023 to 2025 based on BCS superconductivity theory, including the renowned X_2YH_6 system, perovskite MXH_3 system, M_3XH_8 system, cage-like BCN-doped metal atomic systems derived from LaH_{10} structural evolution, and two-dimensional honeycomb-structured systems evolving from MgB_2. The HTSC-2025 benchmark has been open-sourced at https://github.com/xqh19970407/HTSC-2025 and will be continuously updated. This benchmark holds significant importance for accelerating the discovery of superconducting materials using AI-based methods.
S2SNet: A Pretrained Neural Network for Superconductivity Discovery
Superconductivity allows electrical current to flow without any energy loss, and thus making solids superconducting is a grand goal of physics, material science, and electrical engineering. More than 16 Nobel Laureates have been awarded for their contribution to superconductivity research. Superconductors are valuable for sustainable development goals (SDGs), such as climate change mitigation, affordable and clean energy, industry, innovation and infrastructure, and so on. However, a unified physics theory explaining all superconductivity mechanism is still unknown. It is believed that superconductivity is microscopically due to not only molecular compositions but also the geometric crystal structure. Hence a new dataset, S2S, containing both crystal structures and superconducting critical temperature, is built upon SuperCon and Material Project. Based on this new dataset, we propose a novel model, S2SNet, which utilizes the attention mechanism for superconductivity prediction. To overcome the shortage of data, S2SNet is pre-trained on the whole Material Project dataset with Masked-Language Modeling (MLM). S2SNet makes a new state-of-the-art, with out-of-sample accuracy of 92% and Area Under Curve (AUC) of 0.92. To the best of our knowledge, S2SNet is the first work to predict superconductivity with only information of crystal structures. This work is beneficial to superconductivity discovery and further SDGs. Code and datasets are available in https://github.com/zjuKeLiu/S2SNet
Fully Gapped Superconductivity in the Nonsymmorphic Centrosymmetric Superconductor In2Bi
The nature of superconductivity in nonsymmorphic In2Bi remains an open question, with ongoing debate over whether it exhibits conventional (BCS-like) or unconventional superconductivity. Here we report the physical characteristics and superconducting properties of polycrystalline In2Bi. Measurements of electrical resistivity, magnetization, penetration depth, and specific heat demonstrate the superconducting transition temperature about 6 K, with a sharp transition in resistivity (Delta_Tc = 0.1 K) and RRR = 57.32, reflecting the high quality of the sample. The upper critical field Hc2(0) obtained from resistivity and magnetization measurements are in good agreement with each other and are smaller than the Pauli limit, suggesting orbital limited mechanism. The coherence length = 35.43 nm, penetration depth = 101.9 nm and electron-phonon coupling constant = 1.05 suggest strongly coupled type-II superconductivity. For T<Tc, Delta_lambda(T) is best described by an s-wave BCS model and does not have any power law dependency with T, which is expected for a nodeless superconducting order parameter. The superfluid density reveals a fully gapped superconductivity with a gap of 2Delta_0/kBTc = 4.02. In the superconducting state, the electronic specific heat is best described by an s-wave BCS model with a gap of 2Delta_0/kBTc = 4.05. All these results from the present study indicate that In2Bi is a typical type-II,BCS-like, strongly coupled, and fully gapped superconductor in the dirty limit.
Scqubits: a Python package for superconducting qubits
scqubits is an open-source Python package for simulating and analyzing superconducting circuits. It provides convenient routines to obtain energy spectra of common superconducting qubits, such as the transmon, fluxonium, flux, cos(2ϕ) and the 0-π qubit. scqubits also features a number of options for visualizing the computed spectral data, including plots of energy levels as a function of external parameters, display of matrix elements of various operators as well as means to easily plot qubit wavefunctions. Many of these tools are not limited to single qubits, but extend to composite Hilbert spaces consisting of coupled superconducting qubits and harmonic (or weakly anharmonic) modes. The library provides an extensive suite of methods for estimating qubit coherence times due to a variety of commonly considered noise channels. While all functionality of scqubits can be accessed programatically, the package also implements GUI-like widgets that, with a few clicks can help users both create relevant Python objects, as well as explore their properties through various plots. When applicable, the library harnesses the computing power of multiple cores via multiprocessing. scqubits further exposes a direct interface to the Quantum Toolbox in Python (QuTiP) package, allowing the user to efficiently leverage QuTiP's proven capabilities for simulating time evolution.
Potential and Limitation of High-Frequency Cores and Caches
This paper explores the potential of cryogenic semiconductor computing and superconductor electronics as promising alternatives to traditional semiconductor devices. As semiconductor devices face challenges such as increased leakage currents and reduced performance at higher temperatures, these novel technologies offer high performance and low power computation. Conventional semiconductor electronics operating at cryogenic temperatures (below -150{\deg}C or 123.15 K) can benefit from reduced leakage currents and improved electron mobility. On the other hand, superconductor electronics, operating below 10 K, allow electrons to flow without resistance, offering the potential for ultra-low-power, high-speed computation. This study presents a comprehensive performance modeling and analysis of these technologies and provides insights into their potential benefits and limitations. We implement models of in-order and out-of-order cores operating at high clock frequencies associated with superconductor electronics and cryogenic semiconductor computing in gem5. We evaluate the performance of these components using workloads representative of real-world applications like NPB, SPEC CPU2006, and GAPBS. Our results show the potential speedups achievable by these components and the limitations posed by cache bandwidth. This work provides valuable insights into the performance implications and design trade-offs associated with cryogenic and superconductor technologies, laying the foundation for future research in this field using gem5.
The inverse proximity effect in strong ferromagnet-superconductor structures
The magnetization in a superconductor induced due to the inverse proximity effect is investigated in hybrid bilayers containing a superconductor and a ferromagnetic insulator or a strongly spin-polarized ferromagnetic metal. The study is performed within a quasiclassical Green function framework, wherein Usadel equations are solved with boundary conditions appropriate for strongly spin-polarized ferromagnetic materials. A comparison with recent experimental data is presented. The singlet to triplet conversion of the superconducting correlations as a result of the proximity effect with a ferromagnet is studied.
Possible Meissner effect near room temperature in copper-substituted lead apatite
With copper-substituted lead apatite below room temperature, we observe diamagnetic dc magnetization under magnetic field of 25 Oe with remarkable bifurcation between zero-field-cooling and field-cooling measurements, and under 200 Oe it changes to be paramagnetism. A glassy memory effect is found during cooling. Typical hysteresis loops for superconductors are detected below 250 K, along with an asymmetry between forward and backward sweep of magnetic field. Our experiment suggests at room temperature the Meissner effect is possibly present in this material.
Conductance switching and nonequilibrium phase coexistence in superconductors with intermediate bias
Superconducting systems may display different types of nonequilibrium states depending on the specific constraints imposed for measurement. We probe current-voltage relations of three-dimensional superconducting films by allowing finite voltages to develop across their length. Our experiments reveal sharp features of negative differential conductance which highlight the validity of the principle of minimum entropy production at the critical current transition. We have observed dissipative states with resistances intermediate between those of superconducting and normal phases at zero applied magnetic field, indicating a phenomenon of phase coexistence under nonequilibrium conditions. The features of steady states reported here are not accessible in conventional transport experiments with current-biasing methods.
Hidden Staggered Superconducting Order in V2Se2O-Family Altermagnets
η pairing describes a staggered superconducting condensate whose order parameter changes sign between neighboring unit cells while maintaining a uniform magnitude. Nearly four decades after its theoretical proposal by C. N. Yang, a material platform for stabilizing η pairing has remained elusive. Here, we reveal that altermagnetism, despite being pair breaking for conventional BCS pairing, naturally favors η-like pairing in V_2Se_2O-family altermagnets. Their valley-contrasting spin structure gives rise to oppositely spin-polarized, symmetry-related valleys centered at X=(π,0) and Y=(0,π), which form spin-singlet pairing partners separated by the commensurate momentum mathbf Q=(π,π), thereby favoring an η-like condensate. Self-consistent calculations demonstrate that the resulting η-like state remains robust over broad variations of chemical potential, hopping parameters, and Fermi-surface topology. To detect this hidden staggered order, we propose a phase-sensitive Josephson measurement with a uniform superconductor, where destructive interference suppresses single-Cooper-pair tunneling while preserving two-Cooper-pair processes. This constitutes a charge-4e-like Josephson response despite a bulk condensate composed of charge-2e Cooper pairs, providing a direct phase-sensitive signature of the otherwise elusive η-like condensate in V_2Se_2O-family altermagnets.
Charting the landscape of Bardeen-Cooper-Schrieffer superconductors in experimentally known compounds
We perform a high-throughput computational search for novel phonon-mediated superconductors, starting from the Materials Cloud 3-dimensional structure database of experimentally known inorganic stoichiometric compounds. We first compute the Allen-Dynes critical temperature (T_c) for 4533 non-magnetic metals using a direct and progressively finer sampling of the electron-phonon couplings. For the candidates with the largest T_c, we use automated Wannierizations and electron-phonon interpolations to obtain a high-quality dataset for the most promising 250 dynamically stable structures, for which we calculate spectral functions, superconducting bandgaps, and isotropic Migdal-Eliashberg critical temperatures. For 140 of these, we also provide anisotropic Migdal-Eliashberg superconducting gaps and critical temperatures. The approach is remarkably successful in finding known superconductors, and we find 24 unknown ones with a predicted anisotropic T_{rm c} above 10~K. Among them, we identify a possible double gap superconductor (p-doped BaB_2), a non-magnetic half-Heusler ZrRuSb, and the perovskite TaRu_3C, all exhibiting significant T_{rm c}. Finally, we introduce a sensitivity analysis to estimate the robustness of the predictions.
Prediction of superconducting properties of materials based on machine learning models
The application of superconducting materials is becoming more and more widespread. Traditionally, the discovery of new superconducting materials relies on the experience of experts and a large number of "trial and error" experiments, which not only increases the cost of experiments but also prolongs the period of discovering new superconducting materials. In recent years, machine learning has been increasingly applied to materials science. Based on this, this manuscript proposes the use of XGBoost model to identify superconductors; the first application of deep forest model to predict the critical temperature of superconductors; the first application of deep forest to predict the band gap of materials; and application of a new sub-network model to predict the Fermi energy level of materials. Compared with our known similar literature, all the above algorithms reach state-of-the-art. Finally, this manuscript uses the above models to search the COD public dataset and identify 50 candidate superconducting materials with possible critical temperature greater than 90 K.
Nodal nematic superconductivity in moiré graphene
Unconventional superconductivity can emerge in various forms in strongly correlated systems. Historically, the most extensively studied examples include nodal and triplet pairing, which were experimentally detected in cuprates and superfluid helium-3, respectively. Beyond these canonical cases, there are also nematic superconductors, in which the rotational symmetry of the lattice is broken in the superconducting state. While there are several examples of nematic superconductors whose pairing emerges inside a preexisting nematic normal state, experimental evidence for superconducting states that intrinsically break rotational symmetry on their own has been exceedingly scarce. Here, we report the experimental realization and identification of an intrinsic multi-component nodal nematic superconducting state in magic-angle twisted trilayer graphene (MATTG). By integrating tunneling spectroscopy with quantum transport measurements, we directly probe the symmetry of low-energy superconducting quasiparticles. Deep inside the superconducting state, we observe a pronounced two-fold anisotropy in the zero-bias tunneling conductance under an in-plane magnetic field, which is strongly suppressed together with superconductivity as the temperature or perpendicular magnetic field is increased. Remarkably, the major axis of anisotropy rotates by up to 90^{circ} across the superconducting dome, indicating an intrinsic, field- and density-tunable symmetry of the low-energy excitations. These behaviors imply a nodal superconducting state in MATTG that spontaneously breaks the six-fold rotational symmetry of the moiré superlattice. Our results establish moiré graphene as a versatile platform for realizing and interrogating nodal nematic superconductivity, opening a new avenue for exploring unconventional symmetry-breaking superconducting states in two-dimensional materials.
Observability of surface currents in p-wave superconductors
A general approach is formulated to describe spontaneous surface current distribution in a chiral p-wave superconductor. We use the quasiclassical Eilenberger formalism in the Ricatti parametrization to describe various types of the superconductor surface, including arbitrary roughness and metallic behaviour of the surface layer. We calculate angle resolved distributions of the spontaneous surface currents and formulate the conditions of their observability. We argue that local measurements of these currents by muSR technique may provide an information on the underlying pairing symmetry in the bulk superconductor.
Automatic Characterization of Fluxonium Superconducting Qubits Parameters with Deep Transfer Learning
Accurate determination of qubit parameters is critical for the successful implementation of quantum information and computation applications. In solid state systems, the parameters of individual qubits vary across the entire system, requiring time consuming measurements and manual fitting processes for characterization. Recent developed superconducting qubits, such as fluxonium or 0-pi qubits, offer improved fidelity operations but exhibit a more complex physical and spectral structure, complicating parameter extraction. In this work, we propose a machine learning (ML)based methodology for the automatic and accurate characterization of fluxonium qubit parameters. Our approach utilized the energy spectrum calculated by a model Hamiltonian with various magnetic fields, as training data for the ML model. The output consists of the essential fluxonium qubit energy parameters, EJ, EC, and EL in Hamiltonian. The ML model achieves remarkable accuracy (with an average accuracy 95.6%) as an initial guess, enabling the development of an automatic fitting procedure for direct application to realistic experimental data. Moreover, we demonstrate that similar accuracy can be retrieved even when the input experimental spectrum is noisy or incomplete, highlighting the model robustness. These results suggest that our automated characterization method, based on a transfer learning approach, provides a reliable framework for future extensions to other superconducting qubits or different solid-state systems. Ultimately, we believe this methodology paves the way for the construction of large-scale quantum processors.
Building an AdS/CFT superconductor
We show that a simple gravitational theory can provide a holographically dual description of a superconductor. There is a critical temperature, below which a charged condensate forms via a second order phase transition and the (DC) conductivity becomes infinite. The frequency dependent conductivity develops a gap determined by the condensate. We find evidence that the condensate consists of pairs of quasiparticles.
Semi-automatic staging area for high-quality structured data extraction from scientific literature
We propose a semi-automatic staging area for efficiently building an accurate database of experimental physical properties of superconductors from literature, called SuperCon2, to enrich the existing manually-built superconductor database SuperCon. Here we report our curation interface (SuperCon2 Interface) and a workflow managing the state transitions of each examined record, to validate the dataset of superconductors from PDF documents collected using Grobid-superconductors in a previous work. This curation workflow allows both automatic and manual operations, the former contains ``anomaly detection'' that scans new data identifying outliers, and a ``training data collector'' mechanism that collects training data examples based on manual corrections. Such training data collection policy is effective in improving the machine-learning models with a reduced number of examples. For manual operations, the interface (SuperCon2 interface) is developed to increase efficiency during manual correction by providing a smart interface and an enhanced PDF document viewer. We show that our interface significantly improves the curation quality by boosting precision and recall as compared with the traditional ``manual correction''. Our semi-automatic approach would provide a solution for achieving a reliable database with text-data mining of scientific documents.
Doping the chiral spin liquid -- topological superconductor or chiral metal?
We point out that there are two different chiral spin liquid states on the triangular lattice and discuss the conducting states that are expected on doping them. These states labeled CS1 and CS2 are associated with two distinct topological orders with different edge states, although they both spontaneously break time reversal symmetry and exhibit the same quantized spin Hall conductance. While CSL1 is related to the Kalmeyer-Laughlin state, CSL2 is the ν=4 member of Kitaev's 16 fold way classification. Both states are described within the Abrikosov fermion representation of spins, and the effect of doping can be accessed by introducing charged holons. On doping CSL2, condensation of charged holons leads to a topological d+id superconductor. However on doping CSL1 , in sharp contrast , two different scenarios can arise: first, if holons condense, a chiral metal with doubled unit cell and finite Hall conductivity is obtained. However, in a second novel scenario, the internal magnetic flux adjusts with doping and holons form a bosonic integer quantum Hall (BIQH) state. Remarkably, the latter phase is identical to a d+id superconductor. In this case the Mott insulator to superconductor transition is associated with a bosonic variant of the integer quantum Hall plateau transition for the holon. We connect the above two scenarios to two recent numerical studies of doped chiral spin liquids on triangular lattice. Our work clarifies the complex relation between topological superconductors, chiral spin liquids and quantum criticality .
First observation of the Josephson-Anderson relation in experiments on hydrodynamic drag
We verify a recent prediction (Eq. 3.50 in G. L. Eyink, Phys. Rev. X 11, 031054 (2021)) for the drag on an object moving through a fluid. In this prediction the velocity field is decomposed into a nonvortical (potential) and vortical contribution, and so is the associated drag force. In the Josephson-Anderson relation the vortical contribution of the drag force follows from the flux of vorticity traversing the streamlines of the corresponding potential flow. The potential component is directly determined by the plate acceleration and its added mass. The Josephson-Anderson relation is derived from the quantum description of superfluids, but remarkably applies to the classical fluid in our experiment. In our experiment a flat plate is accelerated through water using a robotic arm. This geometry is simple enough to allow analytic potential flow streamlines. The monitored plate position shows an oscillatory component of the acceleration, which adds an additional test of the Josephson-Anderson relation. The instantaneous velocity field is measured using particle image velocimetry. It enables us to evaluate Eq. 3.50 from [1] and compare its prediction to the measured drag force. We find excellent agreement, and, most remarkably find that the added mass contribution to the drag force still stands out after the flow has turned vortical. We finally comment on the requirements on the experimental techniques for evaluating the Josephson-Anderson relation.
Dynamic processes in superconductors and the laws of thermodynamics
The transition from the superconducting to the normal state in a magnetic field was considered as a irreversible thermodynamic process before 1933 because of Joule heating. But all physicists became to consider this transition as reversible after 1933 because of the obvious contradiction of the Meissner effect with the second law of thermodynamics if this transition is considered as a irreversible process. This radical change of the opinion contradicted logic since the dissipation of the kinetic energy of the surface screening current into Joule heat in the normal state cannot depend on how this current appeared in the superconducting state. The inconsistency of the conventional theory of superconductivity, created in the framework of the equilibrium thermodynamics, with Joule heating, on which Jorge Hirsch draws reader's attention, is a consequence of this history. In order to avoid contradiction with the second law of thermodynamics, physicists postulated in the thirties of the last century that the surface screening current is damped without the generation of Joule heat. This postulate contradicts not only logic and the conventional theory of superconductivity but also experimental results.
Optical Properties of Superconducting K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 Single Crystals
The optical properties of the superconducting K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 single crystals with a critical temperature T_capprox 26 K have been measured in the {\it ab} plane in a wide frequency range using both infrared Fourier-transform spectroscopy and spectroscopic ellipsometry at temperatures of 4--300 K. The normal-state reflectance of K_{0.8}Fe_{1.7}(Se_{0.73}S_{0.27})_2 is analyzed using a Drude-Lorentz model with one Drude component. The temperature dependences of the plasma frequency, optical conductivity, scattering rate, and dc resistivity of the Drude contribution in the normal state are presented. In the superconducting state, we observe a signature of the superconducting gap opening at 2Δ(5~K) = 11.8~meV. An abrupt decrease in the low-frequency dielectric permittivity varepsilon _1(ω) at T < T_c also evidences the formation of the superconducting condensate. The superconducting plasma frequency ω_{pl,s} = (213pm 5)~cm^{-1} and the magnetic penetration depth λ=(7.5pm 0.2)~μm at T=5~K are determined.
Superconductivity in the Uniform Electron Gas: Irrelevance of Kohn-Luttinger Mechanism
We study the Cooper instability in jellium model in the controlled regime of small to intermediate values of the Coulomb parameter r_s leq 2. We confirm that superconductivity naturally emerges from purely repulsive interactions described by the Kukkonen-Overhauser vertex function. By employing the implicit renormalization approach we reveal that even in the small-r_s limit, the dominant mechanism behind Cooper instability is based on dynamic screening of the Coulomb interaction--accurately captured by the random phase approximation, whereas the Kohn-Luttinger contribution is negligibly small and, thus, not relevant.
Enhancing T_{c} in a composite superconductor/metal bilayer system: a dynamical cluster approximation study
It has been proposed that the superconducting transition temperature T_{c} of an unconventional superconductor with a large pairing scale but strong phase fluctuations can be enhanced by coupling it to a metal. However, the general efficacy of this approach across different parameter regimes remains an open question. Using the dynamical cluster approximation, we study this question in a system composed of an attractive Hubbard layer in the intermediate coupling regime, where the magnitude of the attractive Coulomb interaction |U| is slightly larger than the bandwidth W, hybridized with a noninteracting metallic layer. We find that while the superconducting transition becomes more mean-field-like with increasing interlayer hopping, the superconducting transition temperature T_{c} exhibits a nonmonotonic dependence on the strength of the hybridization t_{perp}. This behavior arises from a reduction of the effective pairing interaction in the correlated layer that out-competes the growth in the intrinsic pair-field susceptibility induced by the coupling to the metallic layer. We find that the largest T_{c} inferred here for the composite system is below the maximum value currently estimated for the isolated negative-U Hubbard model.
3DSC - A New Dataset of Superconductors Including Crystal Structures
Data-driven methods, in particular machine learning, can help to speed up the discovery of new materials by finding hidden patterns in existing data and using them to identify promising candidate materials. In the case of superconductors, which are a highly interesting but also a complex class of materials with many relevant applications, the use of data science tools is to date slowed down by a lack of accessible data. In this work, we present a new and publicly available superconductivity dataset ('3DSC'), featuring the critical temperature T_c of superconducting materials additionally to tested non-superconductors. In contrast to existing databases such as the SuperCon database which contains information on the chemical composition, the 3DSC is augmented by the approximate three-dimensional crystal structure of each material. We perform a statistical analysis and machine learning experiments to show that access to this structural information improves the prediction of the critical temperature T_c of materials. Furthermore, we see the 3DSC not as a finished dataset, but we provide ideas and directions for further research to improve the 3DSC in multiple ways. We are confident that this database will be useful in applying state-of-the-art machine learning methods to eventually find new superconductors.
QMBL: the Quantum Many-Body Leaderboard. A live record of published ground-state energies for lattice Hamiltonians and the electron gas
In condensed matter physics, scientists explore phase diagrams of matter through various methods (analysis, numerics, experiment) and achieve consensus when enough methods agree. The quality of variational results for quantum many-body ground states is mainly judged by energy values and respective errors. Here, we present QMBL, the Quantum Many-Body Leaderboard (https://www.qmbl.org), serving as the energy layer of the scientific consensus. It is a maintained, interactive record of published ground-state energies for lattice Hamiltonians and the homogeneous electron gas. The latest release v0.5.0 holds 2511 energies on 532 instances and collects all of the community's efforts into one view. Of those instances 285 have no exact solution (164 lattice and all 121 electron-gas instances) and any new record serves as a direct improvement to an open science problem. They are the targets of a companion benchmark, QMBL: Open Problems.
Superconductor bistable vortex memory for data storage and in-memory computing
Superconductor electronics (SCE) is a promising complementary and beyond CMOS technology. However, despite its practical benefits, the realization of SCE logic faces a significant challenge due to the absence of dense and scalable nonvolatile memory designs. While various nonvolatile memory technologies, including Non-destructive readout, vortex transitional memory (VTM), and magnetic memory, have been explored, achieving a superconductor random-access memory (RAM) crossbar array remains challenging. This paper introduces a novel, nonvolatile, high-density, and scalable VTM cell design for SCE applications. Our proposed design addresses scaling issues while boasting zero static power consumption characteristics. Our design leverages current summation, enabling analog multiply-accumulate operations -an essential feature for many in-memory computational tasks. We demonstrate the efficacy of our approach with a 32 x 32 superconductor memory array operating at 20 GHz. This design effectively addresses scaling issues and utilizes current summation that can be used for analog multiply-accumulate operations. Additionally, we showcase the accumulation property of the memory through analog simulations conducted on an 8 x 8 superconductor crossbar array.
Subgap spectroscopy along hybrid nanowires by nm-thick tunnel barriers
Tunneling spectroscopy is widely used to examine the subgap spectra in semiconductor-superconductor nanostructures when searching for Majorana zero modes (MZMs). Typically, semiconductor sections controlled by local gates at the ends of hybrids serve as tunnel barriers. Besides detecting states only at the hybrid ends, such gate-defined tunnel probes can cause the formation of non-topological subgap states that mimic MZMs. Here, we develop an alternative type of tunnel probes to overcome these limitations. After the growth of an InSb-Al hybrid nanowire, a precisely controlled in-situ oxidation of the Al shell is performed to yield a nm-thick Al oxide layer. In such thin isolating layer, tunnel probes can be arbitrarily defined at any position along the hybrid nanowire by shadow-wall angle-deposition of metallic leads. This allows us to make multiple tunnel probes along single nanowire hybrids and to successfully identify Andreev bound states (ABSs) of various spatial extension residing along the hybrids.
Disorder-induced Majorana zero modes in a dimerized Kitaev superconductor chain
Motivated by the recent experimental observation of the topological Anderson insulator in disordered atomic wires based on the Su-Schrieffer-Heeger (SSH) model, we study disorder effects on a dimerized Kitaev superconductor chain which is regarded as the superconductor version of the SSH model. By computing the real-space winding number and the zero-bias differential conductance, we analyze the topological phase transitions occurring in a dimerized Kitaev superconductor chain with disorder. It is found that disorder can induce a topologically nontrivial superconductor phase hosting Majorana zero modes (MZMs). We can regulate the appearance of disorder-induced MZMs by adjusting the dimerization parameter. Finally, we use the self-consistent Born approximation method to verify the numerical results.
Periodic Trends and a Physics-Based Multistage Search for High-T_c Hydride Superconductors
Hydrogen-rich materials under pressure are candidates for conventional phonon-mediated superconductivity, but first-principles electron--phonon-coupling (EPC) calculations are computationally demanding. We develop an interpretable multistage workflow for prioritizing binary hydride superconductors before full EPC calculations. Using controlled cubic X_mH_n prototypes at 200~GPa, we introduce the spectral moment A_1 as an intermediate measure of electron--phonon perturbation strength. In its linewidth-based construction, A_1 remains finite as harmonic phonons soften, allowing related structures with imaginary harmonic modes to be screened; it does not establish superconductivity or physical realizability for unstable structures. For dynamically stable cubic systems, A_1 correlates strongly with the H-1s density-of-states fraction at the Fermi level, α, a projected Fermi-surface descriptor, β, and atomic number density, ρ. These trends are summarized heuristically by A_1approx hαβρ, where h is framework- and pressure-dependent; the descriptor is used for ranking, not as a universal T_c predictor. We incorporate αβρ and enthalpic competitiveness into a three-stage evolutionary search comprising multiobjective structural screening, harmonic-phonon stability filtering, and coarse density-functional perturbation-theory (DFPT) EPC calculations. Application to more than 100,000 binary hydride structures at 50 and 200~GPa identifies candidates and prioritizes NaH_6 structural families. Higher-accuracy calculations show that Pm3m NaH_6 is dynamically stable down to 50~GPa and has a harmonic Allen--Dynes estimate of T_capprox230~K. The framework combines electronic descriptors with progressively more expensive stability and EPC calculations for scalable hydride exploration.
Kohn-Luttinger mechanism driven exotic topological superconductivity on the Penrose lattice
The Kohn-Luttinger mechanism for unconventional superconductivity (SC) driven by weak repulsive electron-electron interactions on a periodic lattice is generalized to the quasicrystal (QC) via a real-space perturbative approach. The repulsive Hubbard model on the Penrose lattice is studied as an example, on which a classification of the pairing symmetries is performed and a pairing phase diagram is obtained. Two remarkable properties of these pairing states are revealed, due to the combination of the presence of the point-group symmetry and the lack of translation symmetry on this lattice. Firstly, the spin and spacial angular momenta of a Cooper pair is de-correlated: for each pairing symmetry, both spin-singlet and spin-triplet pairings are possible even in the weak-pairing limit. Secondly, the pairing states belonging to the 2D irreducible representations of the D_5 point group can be time-reversal-symmetry-breaking topological SCs carrying spontaneous bulk super current and spontaneous vortices. These two remarkable properties are general for the SCs on all QCs, and are rare on periodic lattices. Our work starts the new area of unconventional SCs driven by repulsive interactions on the QC.
Evidence for filamentary superconductivity nucleated at antiphase domain walls in antiferromagnetic CaFe_2As_2
Resistivity, magnetization and microscopic ^{75}As nuclear magnetic resonance (NMR) measurements in the antiferromagnetically ordered state of the iron-based superconductor parent material CaFe_2As_2 exhibit anomalous features that are consistent with the collective freezing of domain walls. Below T^*approx 10 K, the resistivity exhibits a peak and downturn, the bulk magnetization exhibits a sharp increase, and ^{75}As NMR measurements reveal the presence of slow fluctuations of the hyperfine field. These features in both the charge and spin response are strongly field dependent, are fully suppressed by H^*approx 15 T, and suggest the presence of filamentary superconductivity nucleated at the antiphase domain walls in this material.
The enigma of the pseudogap phase of the cuprate superconductors
The last few years have seen significant experimental progress in characterizing the copper-based hole-doped high temperature superconductors in the regime of low hole density, p. Quantum oscillations, NMR, X-ray, and STM experiments have shed much light on the nature of the ordering at low temperatures. We review evidence that the order parameter in the non-Lanthanum-based cuprates is a d-form factor density-wave. This novel order acts as an unexpected window into the electronic structure of the pseudogap phase at higher temperatures in zero field: we argue in favor of a `fractionalized Fermi liquid' (FL*) with 4 pockets of spin S=1/2, charge +e fermions enclosing an area specified by p.
Cavity Characterization for the Princeton Axion Search
The Princeton Axion Search (PXS) targets the mass window 0.8--2.1~μeV (corresponding to frequencies 200--500~MHz) at DFSZ sensitivity. The experiment, a haloscope, will use a cylindrical copper-plated aluminum cavity of 700~mm diameter and 1022~mm height, immersed in a 5~T solenoidal magnetic field. A 152~mm diameter tuning rod spanning the height of the cavity rotates to tune the primary mode resonance from 390--480~MHz, the frequency range for initial operations. We deduce the electric and magnetic field mode patterns using a combination of dielectric and metallic bead perturbations on the empty cavity. The measured mode frequencies and the TM_{010} field profile, as a function of tuning rod position, are in excellent agreement with simulations. We describe the effect of fabrication and assembly imperfections, including the bowing of end plates and tilt of the tuning rod. The welded seams and end-cap joints are demonstrated to not significantly degrade Q. We combine measurement and simulation to assess an uncertainty on form factor across the full tuning range. Our results validate PXS's cavity architecture and inform future searches for sub-μeV axions, in which large-volume high-Q structures are required to reach QCD sensitivity.
Mechanical On-Chip Microwave Circulator
Nonreciprocal circuit elements form an integral part of modern measurement and communication systems. Mathematically they require breaking of time-reversal symmetry, typically achieved using magnetic materials and more recently using the quantum Hall effect, parametric permittivity modulation or Josephson nonlinearities. Here, we demonstrate an on-chip magnetic-free circulator based on reservoir engineered optomechanical interactions. Directional circulation is achieved with controlled phase-sensitive interference of six distinct electro-mechanical signal conversion paths. The presented circulator is compact, its silicon-on-insulator platform is compatible with both superconducting qubits and silicon photonics, and its noise performance is close to the quantum limit. With a high dynamic range, a tunable bandwidth of up to 30 MHz and an in-situ reconfigurability as beam splitter or wavelength converter, it could pave the way for superconducting qubit processors with integrated and multiplexed on-chip signal processing and readout.
Stability of Superconducting Strings
We investigate the stability of superconducting strings as bound states of strings and fermion zero modes at both the classical and quantum levels. The dynamics of these superconducting strings can result in a stable configuration, known as a vorton. We mainly focus on global strings, but the majority of the discussion can be applied to local strings. Using lattice simulations, we study the classical dynamics of superconducting strings and confirm that they relax to the vorton configuration through Nambu-Goldstone boson radiation, with no evidence of over-shooting that would destabilize the vorton. We explore the tunneling of fermion zero modes out of the strings. Both our classical analysis and quantum calculations yield consistent results: the maximum energy of the zero mode significantly exceeds the fermion mass, in contrast to previous literature. Additionally, we introduce a world-sheet formalism to evaluate the decay rate of zero modes into other particles, which constitute the dominant decay channel. We also identify additional processes that trigger zero-mode decay due to non-adiabatic changes of the string configuration. In these decay processes, the rates are suppressed by the curvature of string loops, with exponential suppression for large masses of the final states. We further study the scattering with light charged particles surrounding the string core produced by the zero-mode current and find that a wide zero-mode wavefunction can enhance vorton stability.
Transport in two-dimensional topological materials: recent developments in experiment and theory
We review theoretical and experimental highlights in transport in two-dimensional materials focussing on key developments over the last five years. Topological insulators are finding applications in magnetic devices, while Hall transport in doped samples and the general issue of topological protection remain controversial. In transition metal dichalcogenides valley-dependent electrical and optical phenomena continue to stimulate state-of-the-art experiments. In Weyl semimetals the properties of Fermi arcs are being actively investigated. A new field, expected to grow in the near future, focuses on the non-linear electrical and optical responses of topological materials, where fundamental questions are once more being asked about the intertwining roles of the Berry curvature and disorder scattering. In topological superconductors the quest for chiral superconductivity, Majorana fermions and topological quantum computing is continuing apace.
First-principles design and subsequent synthesis of a material to search for the permanent electric dipole moment of the electron
We describe the first-principles design and subsequent synthesis of a new material with the specific functionalities required for a solid-state-based search for the permanent electric dipole moment of the electron. We show computationally that perovskite-structure europium barium titanate should exhibit the required large and pressure-dependent ferroelectric polarization, local magnetic moments, and absence of magnetic ordering even at liquid helium temperature. Subsequent synthesis and characterization of Eu_{0.5}Ba_{0.5}TiO_3 ceramics confirm the predicted desirable properties.
d-wave superconductivity in quintuple-layer bulk superconductor La_6Ni_5O_{12}
The recent realization of bulk superconductivity in the quintuple-layer nickelate La_6Ni_5O_{12} opens new opportunities to probe the pairing symmetry of the reduced Ruddlesden--Popper (RP) nickelate family. Using an effective five-layer Hubbard model and variational Monte Carlo calculations, we find that a spin-singlet d_{x^2-y^2}-wave state is energetically favored, while extended-s-wave pairing is strongly suppressed. Based on the optimized superconducting state, we further calculate several experimentally accessible observables. The tunneling density of states exhibits a characteristic V-shaped low-energy spectrum, the superfluid density shows a linear low-temperature depletion, the Knight shift decreases below T_c, and the spin-lattice relaxation rate follows 1/T_1Tpropto T^2, together providing consistent signatures of a clean nodal superconductor. Extending the same framework to related reduced RP nickelates, we find a robust d-wave tendency in infinite-layer LaNiO_{2}, while trilayer La_4Ni_3O_{8} at its nominal filling lies close to the boundary between d-wave superconductivity and a non-superconducting state. These results establish bulk La_6Ni_5O_{12} as a promising platform for determining the pairing symmetry of nickelate superconductors and suggest a common d_{x^2-y^2}-wave pairing tendency across the reduced RP nickelate family.
Low-temperature ferroelectric phase and magnetoelectric coupling in the underdoped La_2CuO_(4+x)
We report the discovery of a ferroelectric ground state below 4.5 K in highly underdoped La_2CuO_(4+x) accompanied by slow charge dynamics which develop below T~40 K. An anisotropic magnetoelectric response has also been observed, indicating considerable spin-charge coupling in this lightly doped "parent" high temperature copper-oxide superconductor. The ferroelectric state is proposed to develop from polar nanoregions, in which spatial inversion symmetry is locally broken due to non-stoichiometric carrier doping.
Topological two-dimensional Floquet lattice on a single superconducting qubit
Previous theoretical and experimental research has shown that current NISQ devices constitute powerful platforms for analogue quantum simulation. With the exquisite level of control offered by state-of-the-art quantum computers, we show that one can go further and implement a wide class of Floquet Hamiltonians, or timedependent Hamiltonians in general. We then implement a single-qubit version of these models in the IBM Quantum Experience and experimentally realize a temporal version of the Bernevig-Hughes-Zhang Chern insulator. From our data we can infer the presence of a topological transition, thus realizing an earlier proposal of topological frequency conversion by Martin, Refael, and Halperin. Our study highlights promises and limitations when studying many-body systems through multi-frequency driving of quantum computers.
Quantum Batteries: A Materials Science Perspective
In the context of quantum thermodynamics, quantum batteries have emerged as promising devices for energy storage and manipulation. Over the past decade, substantial progress has been made in understanding the fundamental properties of quantum batteries, with several experimental implementations showing great promise. This Perspective provides an overview of the solid-state materials platforms that could lead to fully operational quantum batteries. After briefly introducing the basic features of quantum batteries, we discuss organic microcavities, where superextensive charging has already been demonstrated experimentally. We then explore other materials, including inorganic nanostructures (such as quantum wells and dots), perovskite systems, and (normal and high-temperature) superconductors. Key achievements in these areas, relevant to the experimental realization of quantum batteries, are highlighted. We also address challenges and future research directions. Despite their enormous potential for energy storage devices, research into advanced materials for quantum batteries is still in its infancy. This paper aims to stimulate interdisciplinarity and convergence among different materials science research communities to accelerate the development of new materials and device architectures for quantum batteries.
Artificial Transmission Line Synthesis Tailored for Traveling-Wave Parametric Processes
Artificial transmission lines built with lumped-element inductors and capacitors form the backbone of broadband, nearly quantum-limited traveling-wave parametric amplifiers (TWPAs). However, systematic design methods for TWPAs, and more generally artificial transmission lines, are lacking. Here, I develop a general synthesis framework for lossless artificial transmission lines by borrowing from periodic structure theory and passive network synthesis. These complementary approaches divide the design space: periodic loading synthesis employs spatial modulation of frequency-independent components, while filter synthesis employs frequency-dependent responses in spatially-uniform components. When tailoring transmission lines for parametric processes, nonlinear elements are added, typically nonlinear inductances in superconducting circuits, while ensuring energy and momentum conservation between interacting tones. Applying this framework, I design a kinetic inductance TWPA with a novel phase-matching architecture, and a backward-pumped Josephson TWPA exploiting an ambidextrous i.e., right-left-handed transmission line.
Analytical simulations of the resonant transmission of electrons in a closed nanocircuit for terahertz applications where a tunneling junction is shunted by a metallic nanowire
Earlier, in the CINT program at Los Alamos National Laboratory, we focused ultrafast mode-locked lasers on the tip-sample junction of a scanning tunneling microscope to generate currents at hundreds of harmonics of the laser pulse repetition frequency. Each harmonic has a signal-to-noise ratio of 20 dB with a 10-dB linewidth of only 3 Hz. Now we model closed quantum nanocircuits with rectangular, triangular, or delta-function barrier, shunted by a beryllium filament for quasi-coherent electron transport over mean-free paths as great as 68 nm. The time-independent Schrödinger equation is solved with the boundary conditions that the wavefunction and its derivative are continuous at both connections. These four boundary conditions are used to form a four-by-four complex matrix equation with only zeros in the right-hand column vector which is required to have a non-trivial solution with each of the closed nanocircuits. Each model has four parameters: (1) the barrier length, (2) the height and shape of the barrier, (3) the length of the pre-barrier, and (4) the electron energy. Any three of these may be specified and then the fourth is varied to bring the determinant to zero to find the solutions on lines or surfaces in the space defined by the four parameters. First, we use a simplistic model having a rectangular barrier. The second model has a triangular barrier as a first approximation to field emission, and we are considering applying this approach for a self-contained nanoscale extension of our earlier effort to generate the harmonics at Los Alamos. The third model has a delta-function barrier, and the fourth model is an extension of the first one where the width of the rectangular barrier is varied inversely with its height.
Photoemission "experiments" on holographic superconductors
We study the effects of a superconducting condensate on holographic Fermi surfaces. With a suitable coupling between the fermion and the condensate, there are stable quasiparticles with a gap. We find some similarities with the phenomenology of the cuprates: in systems whose normal state is a non-Fermi liquid with no stable quasiparticles, a stable quasiparticle peak appears in the condensed phase.
SuperMat: Construction of a linked annotated dataset from superconductors-related publications
A growing number of papers are published in the area of superconducting materials science. However, novel text and data mining (TDM) processes are still needed to efficiently access and exploit this accumulated knowledge, paving the way towards data-driven materials design. Herein, we present SuperMat (Superconductor Materials), an annotated corpus of linked data derived from scientific publications on superconductors, which comprises 142 articles, 16052 entities, and 1398 links that are characterised into six categories: the names, classes, and properties of materials; links to their respective superconducting critical temperature (Tc); and parametric conditions such as applied pressure or measurement methods. The construction of SuperMat resulted from a fruitful collaboration between computer scientists and material scientists, and its high quality is ensured through validation by domain experts. The quality of the annotation guidelines was ensured by satisfactory Inter Annotator Agreement (IAA) between the annotators and the domain experts. SuperMat includes the dataset, annotation guidelines, and annotation support tools that use automatic suggestions to help minimise human errors.
High spin axion insulator
Axion insulators possess a quantized axion field theta=pi protected by combined lattice and time-reversal symmetry, holding great potential for device applications in layertronics and quantum computing. Here, we propose a high-spin axion insulator (HSAI) defined in large spin-s representation, which maintains the same inherent symmetry but possesses a notable axion field theta=(s+1/2)^2pi. Such distinct axion field is confirmed independently by the direct calculation of the axion term using hybrid Wannier functions, layer-resolved Chern numbers, as well as the topological magneto-electric effect. We show that the guaranteed gapless quasi-particle excitation is absent at the boundary of the HSAI despite its integer surface Chern number, hinting an unusual quantum anomaly violating the conventional bulk-boundary correspondence. Furthermore, we ascertain that the axion field theta can be precisely tuned through an external magnetic field, enabling the manipulation of bonded transport properties. The HSAI proposed here can be experimentally verified in ultra-cold atoms by the quantized non-reciprocal conductance or topological magnetoelectric response. Our work enriches the understanding of axion insulators in condensed matter physics, paving the way for future device applications.
First Order Quantum Phase Transition in the Hybrid Metal-Mott Insulator Transition Metal Dichalcogenide 4Hb-TaS2
Coupling together distinct correlated and topologically non-trivial electronic phases of matter can potentially induce novel electronic orders and phase transitions among them. Transition metal dichalcogenide compounds serve as a bedrock for exploration of such hybrid systems. They host a variety of exotic electronic phases and their Van der Waals nature enables to admix them, either by exfoliation and stacking or by stoichiometric growth, and thereby induce novel correlated complexes. Here we investigate the compound 4Hb-TaS_2 that interleaves the Mott-insulating state of 1T-TaS_2 and the putative spin liquid it hosts together with the metallic state of 2H-TaS_2 and the low temperature superconducting phase it harbors. We reveal a thermodynamic phase diagram that hosts a first order quantum phase transition between a correlated Kondo cluster state and a flat band state in which the Kondo cluster becomes depleted. We demonstrate that this intrinsic transition can be induced by an electric field and temperature as well as by manipulation of the interlayer coupling with the probe tip, hence allowing to reversibly toggle between the Kondo cluster and the flat band states. The phase transition is manifested by a discontinuous change of the complete electronic spectrum accompanied by hysteresis and low frequency noise. We find that the shape of the transition line in the phase diagram is determined by the local compressibility and the entropy of the two electronic states. Our findings set such heterogeneous structures as an exciting platform for systematic investigation and manipulation of Mott-metal transitions and strongly correlated phases and quantum phase transitions therein.
Bulk Synthesis of Iron-based Superconductors
Exploratory synthesis efforts for iron-based superconductors (FeSC) have been driven by hopes of improving superconducting critical temperatures (TCs), providing high-quality samples for in-depth studies of intrinsic properties, and exploring potential superconductivity in similar families of materials. This manuscript summarizes the synthesis routes that are used for producing FeSC and their undoped parents, in single crystal and polycrystalline forms. A few of the materials challenges are summarized.
Avoiding Dilution: Using Diffusion and Vision Transformers to resolve Majorana Features in Nanowires at High Temperature
Identifying Majorana zero modes in semiconductor--superconductor nanowires requires ultra-low temperature transport measurements in dilution refrigerators, making device screening slow and resource-intensive. Here, we investigate whether high-temperature conductance data can be used to infer low-temperature Majorana nanowire properties before committing devices to dilution-refrigerator characterization. We generate paired high- and low-temperature conductance simulations for disordered Majorana nanowires and train neural networks to perform two related tasks. First, we use a Shifted Window U-Net Transformer diffusion-inspired architecture to reconstruct low-temperature conductance from thermally broadened high-temperature measurements, achieving high-fidelity recovery with R^2 0.95 for local conductance and R^2 0.91 for nonlocal conductance. Second, we train a Video Vision Transformer-based network to predict the low-temperature topological visibility directly from high-temperature conductance, obtaining R^2 0.80. These results demonstrate that machine-learning models can recover and infer low-temperature Majorana features from experimentally easier high-temperature data, providing a practical route for rejecting poor devices early thus avoiding slow and resource-intensive dilution refrigeration for non-promising devices. This high-temperature screening approach could substantially accelerate the experimental feedback loop for Majorana nanowire device development.
Extended strange metal and superconductivity in partially filled moiré Hubbard bands
Moiré semiconductors provide a physical realization of the Hubbard model. Bandwidth-tuned Mott transitions and complex phase diagrams mimicking those of high-temperature superconductors have been demonstrated near a weak Mott insulating state at half-band-filling. The platform also provides an opportunity to explore the physics of a partially filled Hubbard band at doping densities far away from the Mott insulator, a regime that has remained largely unexplored. Here we report the emergence of an extended strange metal (ESM), in both doping density and twist angle, in a partially filled Hubbard band of twisted bilayer WSe2. The ESM is in the clean limit, persists down to 100mK, and spans over multiple symmetry-breaking ground states; it also appears only at small twist angles, where electronic correlations are strong. These observations distinguish the state from the reported strange metals associated with quantum criticality and favor the viewpoint that it is an intrinsic state of matter. We also report the observation of a new superconducting dome being developed from the ESM but far away from both the Mott insulating state and the van Hove singularity of the material. Our work opens the door to exploring the new regime of partially filled Hubbard bands in the clean limit.
Automatic extraction of materials and properties from superconductors scientific literature
The automatic extraction of materials and related properties from the scientific literature is gaining attention in data-driven materials science (Materials Informatics). In this paper, we discuss Grobid-superconductors, our solution for automatically extracting superconductor material names and respective properties from text. Built as a Grobid module, it combines machine learning and heuristic approaches in a multi-step architecture that supports input data as raw text or PDF documents. Using Grobid-superconductors, we built SuperCon2, a database of 40324 materials and properties records from 37700 papers. The material (or sample) information is represented by name, chemical formula, and material class, and is characterized by shape, doping, substitution variables for components, and substrate as adjoined information. The properties include the Tc superconducting critical temperature and, when available, applied pressure with the Tc measurement method.
Sequential quantum simulation of spin chains with a single circuit QED device
Quantum simulation of many-body systems in materials science and chemistry are promising application areas for quantum computers. However, the limited scale and coherence of near-term quantum processors pose a significant obstacle to realizing this potential. Here, we theoretically outline how a single-circuit quantum electrodynamics (cQED) device, consisting of a transmon qubit coupled to a long-lived cavity mode, can be used to simulate the ground state of a highly-entangled quantum many-body spin chain. We exploit recently developed methods for implementing quantum operations to sequentially build up a matrix product state (MPS) representation of a many-body state. This approach re-uses the transmon qubit to read out the state of each spin in the chain and exploits the large state space of the cavity as a quantum memory encoding inter-site correlations and entanglement. We show, through simulation, that analog (pulse-level) control schemes can accurately prepare a known MPS representation of a quantum critical spin chain in significantly less time than digital (gate-based) methods, thereby reducing the exposure to decoherence. We then explore this analog-control approach for the variational preparation of an unknown ground state. We demonstrate that the large state space of the cavity can be used to replace multiple qubits in a qubit-only architecture, and could therefore simplify the design of quantum processors for materials simulation. We explore the practical limitations of realistic noise and decoherence and discuss avenues for scaling this approach to more complex problems that challenge classical computational methods.
Robust Spin Qubit Coupler via Minimal Kitaev Chain
While a minimal Kitaev chain is promised to host unprotected Majorana zero modes, its role for spin qubits is relatively underappreciated. Following recent breakthroughs in the fine control of transport behaviors, we propose to use minimal Kitaev chain as a robust coupling module between spin qubits. Long-distance, anisotropic exchange coupling can be mediated by the Andreev bound states (ABSs) in the hybrid segment. The chemical potential of ABS gives a simple way to selectively control the coupling strength and its response to local perturbations. Moreover, this additional control degree of freedom creates a unique sweet spot, allowing both strong coupling and first-order immunity against charge noise. The protected qubit encoded on the minimal Kitaev chain at the sweet spot is shown to boast over 200 fold improvement in decoherence time.
AtomGPT: Atomistic Generative Pre-trained Transformer for Forward and Inverse Materials Design
Large language models (LLMs) such as generative pretrained transformers (GPTs) have shown potential for various commercial applications, but their applicability for materials design remains underexplored. In this article, we introduce AtomGPT, a model specifically developed for materials design based on transformer architectures, to demonstrate the capability for both atomistic property prediction and structure generation. We show that a combination of chemical and structural text descriptions can efficiently predict material properties with accuracy comparable to graph neural network models, including formation energies, electronic bandgaps from two different methods and superconducting transition temperatures. Furthermore, we demonstrate that AtomGPT can generate atomic structures for tasks such as designing new superconductors, with the predictions validated through density functional theory calculations. This work paves the way for leveraging LLMs in forward and inverse materials design, offering an efficient approach to the discovery and optimization of materials.
Measuring Casimir Force Across a Superconducting Transition
The Casimir effect and superconductivity are foundational quantum phenomena whose interaction remains an open question in physics. How Casimir forces behave across a superconducting transition remains unresolved, owing to the experimental difficulty of achieving alignment, cryogenic environments, and isolating small changes from competing effects. This question carries implications for electron physics, quantum gravity, and high-temperature superconductivity. Here we demonstrate an on-chip superconducting platform that overcomes these challenges, achieving one of the most parallel Casimir configurations to date. Our microchip-based cavities achieve unprecedented area-to-separation ratio between plates, exceeding previous Casimir experiments by orders of magnitude and generating the strongest Casimir forces yet between compliant surfaces. Scanning tunneling microscopy (STM) is used for the first time to directly detect the resonant motion of a suspended membrane, with subatomic precision in both lateral positioning and displacement. Such precision measurements across a superconducting transition allow for the suppression of all van der Waals, electrostatic, and thermal effects. Preliminary measurements suggest superconductivity-dependent shifts in the Casimir force, motivating further investigation and comparison with theories. By uniting extreme parallelism, nanomechanics, and STM readout, our platform opens a new experimental frontier at the intersection of Casimir physics and superconductivity.
A mono-material Nernst thermopile with hermaphroditic legs
A large transverse thermoelectric response, known as anomalous Nernst effect (ANE) has been recently observed in several topological magnets. Building a thermopile employing this effect has been the subject of several recent propositions. Here, we design and build a thermopile with an array of tilted adjacent crystals of Mn_3Sn. The design employs a single material and replaces pairs of P and N thermocouples of the traditional design with hermaphroditic legs. The design exploits the large lag angle between the applied field and the magnetization, which we attribute to the interruption of magnetic octupoles at the edge of xy-plane. Eliminating extrinsic contacts between legs will boost the efficiency, simplify the process and pave the way for a new generation of thermopiles.
Influence of pressure on properties of multi-gap type-I superconductor BeAu
We report on studies of the superconducting and normal state properties of the noncentrosymmetric superconductor BeAu under hydrostatic pressure conditions. The room-temperature equation of state (EOS) reveals the values of the bulk modulus (B_0) and its first derivative (B^prime_0) at ambient pressure to be B_0 simeq 132~GPa and B^prime_0 simeq 30, respectively. Up to the highest pressures studied (p simeq 2.2~GPa), BeAu remains a multi-gap type-I superconductor. The analysis of B_{rm c}(T, p) data within the self-consistent two-gap approach suggests the presence of two superconducting energy gaps, with the gap-to-T_{rm c} ratios Δ_1/k_{rm B}T_{rm c} sim 2.3 and Δ_2/k_{rm B}T_{rm c} sim 1.1 for the larger and smaller gaps, respectively [Δ= Δ(0) is the zero-temperature value of the gap and k_{rm B} is the Boltzmann constant]. With increasing pressure, Δ_1/k_{rm B}T_{rm c} increases while Δ_2/k_{rm B}T_{rm c} decreases, suggesting that pressure enhances (weakens) the coupling strength between the superconducting carriers within the bands where the larger (smaller) superconducting energy gap has opened. The superconducting transition temperature T_{rm c}, black{the zero-temperature values of the superconducting gaps Δ_1 and Δ_2} and the zero-temperature value of the thermodynamic critical field B_{rm c}(0) decrease with increasing pressure, with the rates of {rm d}T_{rm c}/{rm d}p simeq -0.195~K/GPa, black{{rm d}Δ_1/{rm d}p simeq -0.034~meV/GPa, {rm d}Δ_2/{rm d}p simeq -0.029~meV/GPa,} and {rm d}B_{rm c}(0)/{rm d}p = -2.65(1)~mT/GPa, respectively. The measured B_{rm c}(0) values plotted as a function of T_{rm c} follow an empirical scaling relation established for conventional type-I superconductors.
Multiflavor Mott insulators in quantum materials and ultracold atoms
Mott insulators with large and active (or multiflavor) local Hilbert spaces widely occur in quantum materials and ultracold atomic systems, and are dubbed "multiflavor Mott insulators". For these multiflavored Mott insulating materials, the spin-only description with the quadratic spin interactions is often insufficient to capture the major physical processes. In the situation with active orbitals, the Kugel-Khomskii superexchange model was then proposed. We briefly review this historical model and discuss the modern developments beyond the original spin-orbital context. These include and are not restricted to the 4d/5d transition metal compounds with the spin-orbit-entangled J=3/2 quadruplets, the rare-earth magnets with two weakly-separated crystal field doublets, breathing magnets and/or the cluster and molecular magnets, et al. We explain the microscopic origin of the emergent Kugel-Khomskii physics in each realization with some emphasis on the J=3/2 quadruplets, and refer the candidate multiflavor Mott insulators as "J=3/2 Mott insulators". For the ultracold atoms, we review the multiflavor Mott insulator realization with the ultracold alkaline and alkaline-earth atoms on the optical lattices. Despite a large local Hilbert space from the atomic hyperfine spin states, the system could naturally realize a large symmetry group such as the Sp(N) and SU(N) symmetries. These ultracold atomic systems lie in the large-N regime of these symmetry groups and are characterized by strong quantum fluctuations. The Kugel-Khomskii physics and the exotic quantum ground states with the "baryon-like" physics can appear in various limits. We conclude with our vision and outlook on this subject.
Simulation and measurement of stray fields for the manipulation of spin-qubits in one- and two-dimensional arrays
The inhomogeneous magnetic stray field of micromagnets has been extensively used to manipulate electron spin qubits. By means of micromagnetic simulations and scanning superconducting quantum interference device microscopy, we show that the polycrystallinity of the magnet and non-uniform magnetization significantly impact the stray field and corresponding qubit properties. We find that the random orientation of the crystal axis in polycrystalline Co magnets alters the qubit frequencies by up to 0.5 GHz, compromising single qubit addressability and single gate fidelities. We map the stray field of Fe micromagnets with an applied magnetic field of up to 500 mT (mimicking conditions when operating qubits), finding field gradients above 1 mT/nm. The measured gradients and the lower magnetocrystalline anisotropy of Fe demonstrate the advantage of using Fe instead of Co for magnets in spin qubit devices. These properties of Fe also enabled us to design a 2D arrangement of nanomagnets for driving spin qubits distributed on a 2D lattice.
Type 1.5 vortex bags in single component Ginzburg-Landau models with higher order potentials
We demonstrate the existence of type 1.5 like superconductivity in a single component Ginzburg-Landau model with a higher order potential. The model exhibits two competing superconducting Meissner states (MS), each of which has its own pair of length scales (coherence length and penetration depth). The solutions take the form of bags that contain vortices of one vacuum inside the other. This gives rise to four different types of vortex interaction, where one set of length scales determines vortex interactions inside the bags and the other set between the bags. Hence, within the bag the vortices can repel or attract and the bags themselves can repel or attract depending on the hierarchy of four length scales. When vortices repel within the bag, solutions act similarly to those in type 1.5 multicomponent superconductors, but in a single component system.
Trapping Centers at the Superfluid-Mott-insulator Criticality: Transition between Charge-quantized States
Under the conditions of superfluid-Mott-insulator criticality in two dimensions, the trapping centers--i.e., local potential wells and bumps--are generically characterized by an integer charge corresponding to the number of trapped particles (if positive) or holes (if negative). Varying the strength of the center leads to a transition between two competing ground states with charges differing by pm 1. The hallmark of the transition scenario is a splitting of the number density distortion, δn(r), into a half-integer core and a large halo carrying the complementary charge of pm 1/2. The sign of the halo changes across the transition and the radius of the halo, r_0, diverges on the approach to the critical strength of the center, V = V_c, by the law r_0 propto |V-V_c|^{-tildeν}, with tildeν approx 2.33(5).
High-throughput calculations of magnetic topological materials
The discoveries of intrinsically magnetic topological materials, including semimetals with a large anomalous Hall effect and axion insulators, have directed fundamental research in solid-state materials. Topological quantum chemistry has enabled the understanding of and the search for paramagnetic topological materials. Using magnetic topological indices obtained from magnetic topological quantum chemistry (MTQC), here we perform a high-throughput search for magnetic topological materials based on first-principles calculations. We use as our starting point the Magnetic Materials Database on the Bilbao Crystallographic Server, which contains more than 549 magnetic compounds with magnetic structures deduced from neutron-scattering experiments, and identify 130 enforced semimetals (for which the band crossings are implied by symmetry eigenvalues), and topological insulators. For each compound, we perform complete electronic structure calculations, which include complete topological phase diagrams using different values of the Hubbard potential. Using a custom code to find the magnetic co-representations of all bands in all magnetic space groups, we generate data to be fed into the algorithm of MTQC to determine the topology of each magnetic material. Several of these materials display previously unknown topological phases, including symmetry-indicated magnetic semimetals, three-dimensional anomalous Hall insulators and higher-order magnetic semimetals. We analyse topological trends in the materials under varying interactions: 60 per cent of the 130 topological materials have topologies sensitive to interactions, and the others have stable topologies under varying interactions. We provide a materials database for future experimental studies and open-source code for diagnosing topologies of magnetic materials.
Resistive transition of hydrogen-rich superconductors
Critical temperature, T_c, and the transition width, ΔT_c, are two primary parameters of the superconducting transition. The latter parameter reflects the superconducting state disturbance originating from the thermodynamic fluctuations, atomic disorder, applied magnetic field, the presence of secondary crystalline phases, applied pressure, etc. Recently, Hirsch and Marsiglio (2020 arXiv:2012.12796) performed an analysis of the transition width in several near-room-temperature superconductors (NRTS) and reported that the reduced transition width, ΔT_c/T_c, in these materials does not follow a conventional trend of transition width broadening on applied magnetic field observed in low- and high-T_c superconductors. Here we present thorough mathematical analysis of the magnetoresistive data, R(T,B), for the high-entropy alloy (ScZrNb)_{0.65}[RhPd]_{0.35} and hydrogen-rich superconductors of Im-3m-H_{3}S, C2/m-LaH_{10} and P63/mmc-CeH_9. We found that the reduced transition width, ΔT_c/T_c, in these materials does follow a conventional broadening trend on applied magnetic field.
Attraction from repulsion in an interacting Chern band: chiral superconductivity, generalized Hall crystals, and competing fractional Chern insulators
Experiments realizing strong interactions in partially filled Chern bands have observed fractional Chern insulators (FCIs), superconductors, and topological crystals in close proximity. Yet the microscopic relation between them remains poorly understood. Here, we use tensor network simulations to study repulsively interacting spinless fermions in a tunable topological band of the checkerboard lattice. We characterize the competing phases and identify key features of the experimental phenomenology. FCIs from the Jain sequence transition into chiral p-wave superconductivity both below and above half filling as the band dispersion is enhanced. By contrast, at half filling, a generalized Hall crystal with quantized Hall conductance and a doubled unit cell forms for sufficiently strong coupling. Surprisingly, a weak-coupling approach starting from a metallic parent state captures the nature of both ordered phases at intermediate coupling. We find that fluctuations in the metal generate longer-range attraction, which we analyze within the random-phase approximation. This approach captures the pairing symmetry as well as the radial form factors of the Cooper pairs, and incorporating this attraction into Hartree-Fock selects the observed Hall crystal. Together, these results identify fluctuation-induced attraction from repulsion as a common microscopic ingredient of ordering, while our tensor network computations establish the direct competition of both phases with FCIs.
Numerical modeling of SNSPD absorption utilizing optical conductivity with quantum corrections
Superconducting nanowire single-photon detectors are widely used in various fields of physics and technology, due to their high efficiency and timing precision. Although, in principle, their detection mechanism offers broadband operation, their wavelength range has to be optimized by the optical cavity parameters for a specific task. We present a study of the optical absorption of a superconducting nanowire single photon detector (SNSPD) with an optical cavity. The optical properties of the niobium nitride films, measured by spectroscopic ellipsometry, were modelled using the Drude-Lorentz model with quantum corrections. The numerical simulations of the optical response of the detectors show that the wavelength range of the detector is not solely determined by its geometry, but the optical conductivity of the disordered thin metallic films contributes considerably. This contribution can be conveniently expressed by the ratio of imaginary and real parts of the optical conductivity. This knowledge can be utilized in detector design.
Proximitized Materials
Advances in scaling down heterostructures and having an improved interface quality together with atomically-thin two-dimensional materials suggest a novel approach to systematically design materials. A given material can be transformed through proximity effects whereby it acquires properties of its neighbors, for example, becoming superconducting, magnetic, topologically nontrivial, or with an enhanced spin-orbit coupling. Such proximity effects not only complement the conventional methods of designing materials by doping or functionalization, but can also overcome their various limitations. In proximitized materials it is possible to realize properties that are not present in any constituent region of the considered heterostructure. While the focus is on magnetic and spin-orbit proximity effects with their applications in spintronics, the outlined principles provide also a broader framework for employing other proximity effects to tailor materials and realize novel phenomena.
Onset of a quantum Fisher-Selke sequence in the transverse-field ANNNI model and its bilayer
We study the transverse-field axial next-nearest-neighbor Ising (ANNNI) model on the square lattice and on a bilayer. At the classical multiphase point κ=J_2/J_0=1/2, every configuration of straight domain walls that separates domains of at least two sites is a ground state. The walls are rigid, so perturbation theory in the transverse field g=Γ/J_0 can be carried out for each configuration separately, and we take it to order g^8. Quantum fluctuations select langle 3rangle (uparrowuparrowuparrowdownarrowdownarrowdownarrow) at order g^2, because spins next to a wall gain the most energy from virtual flips. The structures langle 23rangle, langle 223rangle and langle 2223rangle then open between langle 3rangle and the antiphase langle 2rangle at orders g^4, g^6 and g^8, in the order of the Fisher-Selke sequence of the classical three-dimensional model. A second layer suppresses each successive phase more strongly, beyond the stiffening of the local fields. We test the two widest phases with stochastic series expansion quantum Monte Carlo, comparing the free energies of the competing ordered states by thermodynamic integration, since annealing freezes in the modulation that forms at the ordering transition. The simulations reproduce the langle 3rangle wedge to about 1%, and in a pre-registered test langle 23rangle is stable at six of seven points, with the seventh resolved by post-hoc runs.
A New Two-Dimensional Dirac Semimetal Based on the Alkaline Earth Metal, CaP_3
Using an evolutionary algorithm in combination with first-principles density functional theory calculations, we identify two-dimensional (2D) CaP_3 monolayer as a new Dirac semimetal due to inversion and nonsymmorphic spatial symmetries of the structure. This new topological material, composed of light elements, exhibits high structural stability (higher than the phase known in the literature), which is confirmed by thermodynamic and kinetic stability analysis. Moreover, it satisfies the electron filling criteria, so that its Dirac state is located near the Fermi level. The existence of the Dirac state predicted by the theoretical symmetry analysis is also confirmed by first-principles electronic band structure calculations. We find that the energy position of the Dirac state can be tuned by strain, while the Dirac state is unstable against an external electric field since it breaks the spatial inversion symmetry. Our findings should be instrumental in the development of 2D Dirac fermions based on light elements for their application in nanoelectronic devices and topological electronics.
Magnetic Susceptibility of Superconducting Films in the Meissner-London Regime
Extracting the London penetration depth, λ(T), from the measured magnetic susceptibility, χ(T), of a superconducting platelet in a perpendicular magnetic field requires knowing the function χ(λ) computed for the actual sample geometry. Thin films are increasingly important in quantum computing and superconducting electronics, most of which operate at ultra-low excitation fields in the vortex-free regime. Understanding their electromagnetic response in the Meissner--London (finite-λ, no vortices) state is therefore essential for extracting intrinsic properties such as the London penetration depth and superfluid phase stiffness. While numerous prior works have addressed different aspects of this problem, here we focus on providing an analytical semi-empirical representation of χ(λ) based on the 2D sheet-current model and establishing the limits of its applicability using two independent full 3D numerical solutions: finite-element modeling and a volume-current integral equation. As a result, we provide χ(λ) for a disc of radius a and thickness d in closed form, valid for all λ and for aspect ratios δequiv d/(2a)le0.05, and accurate to 0.1%. The two-dimensional sheet description with Pearl length Λ=2λ^2/d is adequate for δlesssim10^{-4} and λgtrsim 4d. Thicker films require the full closed form, which includes the three-dimensional corrections. Using the same numerical analysis, we provide an empirical formula that maps rectangular samples---the geometry most commonly used in experiments---onto a disc with an ``effective radius'' for subsequent calculation of χ(λ), and formulate a complete calibration protocol for whole-sample susceptibility measurements.
Spectroscopic measurements and models of energy deposition in the substrate of quantum circuits by natural ionizing radiation
Naturally occurring background radiation is a source of correlated decoherence events in superconducting qubits that will challenge error-correction schemes. To characterize the radiation environment in an unshielded laboratory, we performed broadband, spectroscopic measurements of background events in silicon substrates located inside a millikelvin refrigerator, an environment representative of superconducting qubit systems. We measured the background spectra in silicon substrates of two thicknesses, 0.5 mm and 1.5 mm, and obtained the average event rate and the integrated power deposition. In a 25 mm^2 area and the thinner substrate, these values are 0.023 events per second and 4.9 keV/s, counting events that deposit at least 40 keV. We find the background spectrum to be nearly featureless. Its intensity decreases by a factor of 40,000 between 100 keV and 3 MeV for silicon substrates 0.5 mm thick. We find the cryogenic measurements to be in good agreement with predictions based on measurements of the terrestrial gamma-ray flux, published models of cosmic-ray fluxes, a crude model of the cryostat, and radiation-transport simulations. No free parameters are required to predict the background spectra in the silicon substrates. The good agreement between measurements and predictions allow assessment of the relative contributions of terrestrial and cosmic background sources and their dependence on substrate thickness. Our spectroscopic measurements are performed with superconducting microresonators that transduce deposited energy to a readily detectable electrical signal. We find that gamma-ray emissions from radioisotopes are responsible for the majority of events depositing E<1.5 MeV, while nucleons among the cosmic-ray secondary particles cause most events that deposit more energy. These results suggest several paths to reducing the impact of background radiation on quantum circuits.
A simple model for strange metallic behavior
A refined semi-holographic non-Fermi liquid model, in which carrier electrons hybridize with operators of a holographic critical sector, has been proposed recently for strange metallic behavior. The model, consistently with effective theory approach, has two couplings whose ratio is related to the doping. We explain the origin of the linear-in-T resistivity and strange metallic behavior as a consequence of the emergence of a universal form of the spectral function which is independent of the model parameters when the ratio of the two couplings take optimal values determined only by the critical exponent. This universal form fits well with photoemission data of copper oxide samples for under/optimal/over-doping with a fixed exponent over a wide range of temperatures. We further obtain a refined Planckian dissipation scenario in which the scattering time τ= f cdot hbar /(k_B T), with f being O(1) at strong coupling, but O(10) at weak coupling.
Quantifying chemical short-range order in metallic alloys
Metallic alloys often form phases - known as solid solutions - in which chemical elements are spread out on the same crystal lattice in an almost random manner. The tendency of certain chemical motifs to be more common than others is known as chemical short-range order (SRO) and it has received substantial consideration in alloys with multiple chemical elements present in large concentrations due to their extreme configurational complexity (e.g., high-entropy alloys). Short-range order renders solid solutions "slightly less random than completely random", which is a physically intuitive picture, but not easily quantifiable due to the sheer number of possible chemical motifs and their subtle spatial distribution on the lattice. Here we present a multiscale method to predict and quantify the SRO state of an alloy with atomic resolution, incorporating machine learning techniques to bridge the gap between electronic-structure calculations and the characteristic length scale of SRO. The result is an approach capable of predicting SRO length scale in agreement with experimental measurements while comprehensively correlating SRO with fundamental quantities such as local lattice distortions. This work advances the quantitative understanding of solid-solution phases, paving the way for SRO rigorous incorporation into predictive mechanical and thermodynamic models.
Bi-quadratic magnetoelectric coupling in underdoped La_2CuO_{4+x}
The recent discovery of relaxor ferroelectricity and magnetoelectric effect in lightly doped cuprate material La_2CuO_{4+x} has provided a number of questions concerning its theoretical description. It has been argued using a Ginzburg-Landau free energy approach that the magnetoelectric effect can be explained by the presence of bi-quadratic interaction terms in the free energy. Here, by using the same free energy functional, we study the variety of behavior which can emerge in the electric polarization under an external magnetic field. Subsequently, we discuss the role of Dzyaloshinskii-Moriya interaction in generating this magnetoelectric response. This work is particularly relevant for such relaxor systems where the material-dependent parameters would be affected by changes in e.g. chemical doping or cooling rate.
QCap: a physics-corrected graph neural network for the capacitance matrix of any planar superconducting device layout
Electromagnetic simulations of device layouts to extract capacitance are computationally intensive, a major obstacle to accurate design of circuit devices. Machine learning models can bypass these simulations, but previous approaches have been restricted to layouts using only particular components, and require thousands of simulations of those same components as training data. We present QCap, a model that accurately predicts the Maxwell capacitance matrix of an arbitrary superconducting device layout in seconds, compared to minutes to hours of Ansys Q3D simulations. We develop a novel design-embedding algorithm that converts the layout into a universal graph format, allowing the model to work with any layout created with any tool. To achieve high accuracy, we obtain a coarse physics prior from a fast method of moments simulation of capacitance, then train the model to correct this prior. On 4,009 test designs withheld from training data the model outputs agree with Q3D simulations to a median error of 0.177%, and on never-seen component families it stays below 1% error. We demonstrate the model's scaling by obtaining the capacitance matrix of a 9-superconducting-qubit device in 12 seconds on a laptop (compared to 19.9 h and 228 GB of memory in Ansys) with sub-percent error, and capacitance of a (too large to simulate) 100-qubit, 781-conductor device in 3.4 min on a laptop. We provide the open-source models and data on SQuADDS and Hugging Face. Our results provide a powerful tool for large-scale accurate circuit design and guide the development of models to bypass other physical simulations.
ARC: A compact, high-field, fusion nuclear science facility and demonstration power plant with demountable magnets
The affordable, robust, compact (ARC) reactor conceptual design study aims to reduce the size, cost, and complexity of a combined fusion nuclear science facility (FNSF) and demonstration fusion Pilot power plant. ARC is a 200-250 MWe tokamak reactor with a major radius of 3.3 m, a minor radius of 1.1 m, and an on-axis magnetic field of 9.2 T. ARC has rare earth barium copper oxide (REBCO) superconducting toroidal field coils, which have joints to enable disassembly. This allows the vacuum vessel to be replaced quickly, mitigating first wall survivability concerns, and permits a single device to test many vacuum vessel designs and divertor materials. The design point has a plasma fusion gain of Q_p~13.6, yet is fully non-inductive, with a modest bootstrap fraction of only ~63%. Thus ARC offers a high power gain with relatively large external control of the current profile. This highly attractive combination is enabled by the ~23 T peak field on coil with newly available REBCO superconductor technology. External current drive is provided by two innovative inboard RF launchers using 25 MW of lower hybrid and 13.6 MW of ion cyclotron fast wave power. The resulting efficient current drive provides a robust, steady state core plasma far from disruptive limits. ARC uses an all-liquid blanket, consisting of low pressure, slowly flowing fluorine lithium beryllium (FLiBe) molten salt. The liquid blanket is low-risk technology and provides effective neutron moderation and shielding, excellent heat removal, and a tritium breeding ratio >= 1.1. The large temperature range over which FLiBe is liquid permits blanket operation at 900 K with single phase fluid cooling and a high-efficiency Brayton cycle, allowing for net electricity generation when operating ARC as a Pilot power plant.
Strongly-Interacting Bosons in a Two-Dimensional Quasicrystal Lattice
Quasicrystals exhibit exotic properties inherited from the self-similarity of their long-range ordered, yet aperiodic, structure. The recent realization of optical quasicrystal lattices paves the way to the study of correlated Bose fluids in such structures, but the regime of strong interactions remains largely unexplored, both theoretically and experimentally. Here, we determine the quantum phase diagram of two-dimensional correlated bosons in an eightfold quasicrystal potential. Using large-scale quantum Monte Carlo calculations, we demonstrate a superfluid-to-Bose glass transition and determine the critical line. Moreover, we show that strong interactions stabilize Mott insulator phases, some of which have spontaneously broken eightfold symmetry. Our results are directly relevant to current generation experiments and, in particular, drive prospects to the observation of the still elusive Bose glass phase in two dimensions and exotic Mott phases.
Theory of the magnetoeletric effect in a lightly doped high-Tc cuprate
In a recent study Viskadourakis et al. discovered that extremely underdoped La_2CuO_(4+x) is a relaxor ferroelectric and a magnetoelectric material at low temperatures. It is further observed that the magnetoelectric response is anisotropic for different directions of electric polarization and applied magnetic field. By constructing an appropriate Landau theory, we show that a bi-quadratic magnetoelectric coupling can explain the experimentally observed polarization dependence on magnetic field. This coupling leads to several novel low-temperature effects including a feedback enhancement of the magnetization below the ferroelectric transition, and a predicted magnetocapacitive effect.
Balanced superconductor-insulator-superconductor mixer on a 9~μm silicon membrane
We present a 380-520 GHz balanced superconductor-insulator-superconductor (SIS) mixer on a single silicon substrate. All radio-frequency (RF) circuit components are fabricated on a 9 μm thick membrane. The intermediate frequency (IF) is separately amplified and combined. The balanced mixer chip, using Nb/Al/Al_{2}O_{3}/Nb SIS junctions, is mounted in a tellurium copper waveguide block at 4.2 K using Au beam lead contacts. We find uncorrected minimum receiver double-sideband noise temperatures of 70 K and a noise suppression of up to 18 dB, measured within a 440-495 GHz RF and a 4-8 GHz IF bandwidth, representing state-of-the-art device performance.
Enabling Domain-Specific Atomistic Models: A Machine Learning Potential for the Solid Acid Family
Machine-learned interatomic potentials trained across the periodic table have made atomistic simulation broadly accessible, and specializing them to a single compound class is widely expected to improve accuracy. Yet examples remain scarce, and fewer still surpass universal models in speed or reach a higher level of electronic-structure theory. Here we present a potential that is universal within the class of water-free solid-state hydrogen-bond network mediated proton conductors rather than across chemistry and a database of 4.4 million first-principles configurations spanning 55 materials. It surpasses leading general-purpose potentials across this domain, recovering measured activation energies and the ordering of anion rotational dynamics that those models miss; agreement on static structure does not imply agreement on transport. Accuracy falls for compositions far from the training set but stays competitive for close structural relatives, and a higher level of electronic-structure theory is reached with a few hundred additional configurations per material. We further introduce a compact variant carrying a fifth of the parameters, faster still and yet more accurate than every general-purpose model tested. It sustains more than a quarter of a million atoms on a single graphics processor, placing grain boundaries and the transition into the highly conducting phase within reach, and making a quantum treatment of the protons affordable. Reference accuracy and accessible system size thus become largely independent, offering a template for other compound classes.
Exciton superfluidity in two-dimensional bilayers at zero and high magnetic fields
We study interlayer exciton superfluidity versus layer separation in two-dimensional electron-hole bilayers at zero magnetic field and quantum Hall bilayers at total filling ν_T=1. Unscreened Hartree-Fock theory predicts coherence at every finite separation, with an energy scale decaying inversely with separation at large distances. We examine how screening, correlations, and spatial instabilities modify this prediction. At zero field, we solve the linearized gap equation with the full momentum and frequency dependence of the interaction screened within the random-phase approximation, without an imposed cutoff. The apparent plasmon enhancement of pairing in the ladder approximation is largely cancelled by the second-order crossed-rung correction. Static screening determines the leading pairing exponent in the controlled high-density limit at fixed separation. At large separation, the pairing scale falls exponentially with squared separation while the instability persists. Extending this result to fixed density assumes Fermi-liquid layers and higher-order dynamical corrections subleading to the static pairing interaction. At high field, we obtain an analytic uniform Hartree-Fock saddle point in the lowest Landau level, coherent at every finite separation. Within Hartree-Fock theory, its finite-wave-vector collective-mode instability favors an excitonic supersolid, distinguishing loss of spatial uniformity from loss of coherence. We conjecture that the quantum Hall bilayer evolves continuously toward weak pairing of composite fermions, with a scale far below the mean-field prediction at large separation. This suppression could produce an apparent critical separation at finite temperature without a ground-state quantum phase transition. The comparison separates the existence, energy scale, and spatial stability of interlayer coherence.
Are queries and keys always relevant? A case study on Transformer wave functions
The dot product attention mechanism, originally designed for natural language processing tasks, is a cornerstone of modern Transformers. It adeptly captures semantic relationships between word pairs in sentences by computing a similarity overlap between queries and keys. In this work, we explore the suitability of Transformers, focusing on their attention mechanisms, in the specific domain of the parametrization of variational wave functions to approximate ground states of quantum many-body spin Hamiltonians. Specifically, we perform numerical simulations on the two-dimensional J_1-J_2 Heisenberg model, a common benchmark in the field of quantum many-body systems on lattice. By comparing the performance of standard attention mechanisms with a simplified version that excludes queries and keys, relying solely on positions, we achieve competitive results while reducing computational cost and parameter usage. Furthermore, through the analysis of the attention maps generated by standard attention mechanisms, we show that the attention weights become effectively input-independent at the end of the optimization. We support the numerical results with analytical calculations, providing physical insights of why queries and keys should be, in principle, omitted from the attention mechanism when studying large systems.
Scale-covariant liquid in nonlocal high Tc strange metals
Experiments in recent years on high T_c superconductors find a puzzling nodal scale-covariant self-energy with an exponent varying continuously with doping. We propose a mechanism: nonlocality induced by poorly screened effective repulsions V_α(r) sim 1/r^α, where a continuously doping-dependent exponent 1 le αle 3 naturally interpolates between the Mott insulating and Fermi liquid limits. We develop a phenomenology of hydrodynamic screening, finding a scale-covariant quasiparticle decay rate Γ(ω,T) propto T^γ Φ(ω/T) in energy ω and temperature T, with γ= 2-1α for nonlocal 1 < α< 2. Our results naturally capture the optimally doped to overdoped regimes, whereas the underdoped regime is qualitatively distinct. In our theory, spectroscopy-fitted exponents directly probe the charged fluid's effective spatial nonlocality. Nonlocality shows that quantum criticality is not necessary to explain scale-covariant phenomena.
Deciphering the "chemical" nature of the exotic isotopes of Hydrogen by the MC-QTAIM analysis: The positively charged Muon and the Muonic Helium as new members of the Periodic Table
This report is a primarily survey on the chemical nature of some exotic species containing the positively charged muon and the muonic Helium, i.e., the negatively charged muon plus helium nucleus, as exotic isotopes of hydrogen, using the newly developed multi-component quantum theory of atoms in molecules (MC-QTAIM) analysis, employing ab initio non-Born-Oppenhiemer wavefunctions. Accordingly, the "atoms in molecules" analysis performed on various asymmetric exotic isotopomers of hydrogen molecule, recently detected experimentally [Science 331, 448 (2011)], demonstrates that both the exotic isotopes are capable of forming atoms in molecules and retaining the identity of hydrogen atom. Various derived properties of atomic basins containing muonic helium cast no doubt that apart from its short life time, it is a heavier isotope of hydrogen while the properties of basins containing the positively charged muon are more remote from those of the orthodox hydrogen basins, capable of appreciable donation of electrons as well as large charge polarization; however, with some tolerance, they may be categorized also as hydrogen basins though with a smaller electronegativity. All in all, present study also clearly demonstrates that the MC-QTAIM analysis is an efficient approach to decipher the chemical nature of species containing exotic constituents, hard to be elucidated by experimental and/or alternative theoretical schemes.
Correlated Electron Materials and Field Effect Transistors for Logic: A Review
Correlated electron systems are among the centerpieces of modern condensed matter sciences, where many interesting physical phenomena, such as metal-insulator transition and high-Tc superconductivity appear. Recent efforts have been focused on electrostatic doping of such materials to probe the underlying physics without introducing disorder as well as to build field-effect transistors that may complement conventional semiconductor metal-oxide-semiconductor field effect transistor (MOSFET) technology. This review focuses on metal-insulator transition mechanisms in correlated electron materials and three-terminal field effect devices utilizing such correlated oxides as the channel layer. We first describe how electron-disorder interaction, electron-phonon interaction and/or electron correlation in solids could modify the electronic properties of materials and lead to metal-insulator transitions. Then we analyze experimental efforts toward utilizing these transitions in field effect transistors and their underlying principles. It is pointed out that correlated electron systems show promise among these various materials displaying phase transitions for logic technologies. Furthermore, novel phenomena emerging from electronic correlation could enable new functionalities in field effect devices. We then briefly review unconventional electrostatic gating techniques, such as ionic liquid gating and ferroelectric gating, which enables ultra large carrier accumulation density in the correlated materials which could in turn lead to phase transitions. The review concludes with a brief discussion on the prospects and suggestions for future research directions in correlated oxide electronics for information processing.
Kinetic inductance current sensor for visible to near-infrared wavelength transition-edge sensor readout
Single-photon detectors based on the superconducting transition-edge sensor are used in a number of visible to near-infrared applications, particularly for photon-number-resolving measurements in quantum information science. To be practical for large-scale spectroscopic imaging or photonic quantum computing applications, the size of visible to near-infrared transition-edge sensor arrays and their associated readouts must be increased from a few pixels to many thousands. In this manuscript, we introduce the kinetic inductance current sensor, a scalable readout technology that exploits the nonlinear kinetic inductance in a superconducting resonator to make sensitive current measurements. Kinetic inductance current sensors can replace superconducting quantum interference devices for many applications because of their ability to measure fast, high slew-rate signals, their compatibility with standard microwave frequency-division multiplexing techniques, and their relatively simple fabrication. Here, we demonstrate the readout of a visible to near-infrared transition-edge sensor using a kinetic inductance current sensor with 3.7 MHz of bandwidth. We measure a readout noise of 1.4 pA/text{Hz}, considerably below the detector noise at frequencies of interest, and an energy resolution of (0.137 pm 0.001) eV at 0.8 eV, comparable to resolutions observed with non-multiplexed superconducting quantum interference device readouts.
Unbalanced Stückelberg Holographic Superconductors with Backreaction
We numerically investigate some properties of unbalanced St\"{u}ckelberg holographic superconductors, by considering backreaction effects of fields on the background geometry. More precisely, we study the impacts of the chemical potential mismatch and St\"{u}ckelberg mechanism on the condensation and conductivity types (electrical, spin, mixed, thermo-electric, thermo-spin and thermal conductivity). Our results show that the St\"{u}ckelberg's model parameters C_{alpha} and alpha not only have significant impacts on the phase transition, but also affect the conductivity pseudo-gap and the strength of conductivity fluctuations. Moreover, the effects of these parameters on a system will be gradually reduced as the imbalance grows. We also find that the influence of alpha on the amplitude of conductivity fluctuations depends on the magnitude of the both C_{alpha} and deltamu/mu in the electric and thermal conductivity cases. This results in that increasing alpha can damp the conductivity fluctuations of an unbalanced system in contrast to balanced ones.
JARVIS-Leaderboard: A Large Scale Benchmark of Materials Design Methods
Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard
Magnonic Hong-Ou-Mandel Effect
We carried out numerical simulations of propagation of spin waves (magnons in quantum language) in a yttrium-iron garnet film. The numerical model is based on an original formalism. We demonstrated that a potential barrier for magnons, created by an Oersted field of a dc current flowing through a wire sitting on top of the film, is able to act as an electrically controlled partly transparent mirror for the magnons. We found that the mirror transparency can be set to 50% by properly adjusting the current strength, thus creating a semi-transparent mirror. A strong Hong-Ou-Mandel Effect for single magnons is expected in this configuration. The effect must be seen as two single magnons, launched simultaneously into the film from two transducers located from the opposite sides of the mirror, creating a two-microwave-photon state at the output port of one of the transducers. The probability of seeing those two-photon states at the output port of either transducer must be the same for both transducers.
New magnetic topological materials from high-throughput search
We conducted a high-throughput search for topological magnetic materials on 522 new, experimentally reported commensurate magnetic structures from MAGNDATA, doubling the number of available materials on the Topological Magnetic Materials database. This brings up to date the previous studies which had become incomplete due to the discovery of new materials. For each material, we performed first-principle electronic calculations and diagnosed the topology as a function of the Hubbard U parameter. Our high-throughput calculation led us to the prediction of 250 experimentally relevant topologically non-trivial materials, which represent 47.89% of the newly analyzed materials. We present five remarkable examples of these materials, each showcasing a different topological phase: Mn{}_2AlB{}_2 (BCSID 1.508), which exhibits a nodal line semimetal to topological insulator transition as a function of SOC, CaMnSi (BCSID 0.599), a narrow gap axion insulator, UAsS (BCSID 0.594) a 5f-orbital Weyl semimetal, CsMnF{}_4 (BCSID 0.327), a material presenting a new type of quasi-symmetry protected closed nodal surface and FeCr{}_2S{}_4 (BCSID 0.613), a symmetry-enforced semimetal with double Weyls and spin-polarised surface states.
From black holes to strange metals
Since the mid-eighties there has been an accumulation of metallic materials whose thermodynamic and transport properties differ significantly from those predicted by Fermi liquid theory. Examples of these so-called non-Fermi liquids include the strange metal phase of high transition temperature cuprates, and heavy fermion systems near a quantum phase transition. We report on a class of non-Fermi liquids discovered using gauge/gravity duality. The low energy behavior of these non-Fermi liquids is shown to be governed by a nontrivial infrared (IR) fixed point which exhibits nonanalytic scaling behavior only in the temporal direction. Within this class we find examples whose single-particle spectral function and transport behavior resemble those of strange metals. In particular, the contribution from the Fermi surface to the conductivity is inversely proportional to the temperature. In our treatment these properties can be understood as being controlled by the scaling dimension of the fermion operator in the emergent IR fixed point.
2D Theoretically Twistable Material Database
The study of twisted two-dimensional (2D) materials, where twisting layers create moiré superlattices, has opened new opportunities for investigating topological phases and strongly correlated physics. While systems such as twisted bilayer graphene (TBG) and twisted transition metal dichalcogenides (TMDs) have been extensively studied, the broader potential of a seemingly infinite set of other twistable 2D materials remains largely unexplored. In this paper, we define "theoretically twistable materials" as single- or multi-layer structures that allow for the construction of simple continuum models of their moiré structures. This excludes, for example, materials with a "spaghetti" of bands or those with numerous crossing points at the Fermi level, for which theoretical moiré modeling is unfeasible. We present a high-throughput algorithm that systematically searches for theoretically twistable semimetals and insulators based on the Topological 2D Materials Database. By analyzing key electronic properties, we identify thousands of new candidate materials that could host rich topological and strongly correlated phenomena when twisted. We propose representative twistable materials for realizing different types of moiré systems, including materials with different Bravais lattices, valleys, and strength of spin-orbital coupling. We provide examples of crystal growth for several of these materials and showcase twisted bilayer band structures along with simplified twisted continuum models. Our results significantly broaden the scope of moiré heterostructures and provide a valuable resource for future experimental and theoretical studies on novel moiré systems.
Low Temperature Two Fluid State in SmB6
Comprehensive study using DC transport, specific heat, magnetization, and two-coil mutual inductance measurements unveils an understanding of three temperature regimes in SmB_6: (i) T geq T^{*} (sim66K), (ii) T_g (sim40 K) leq T < T^{*}, and (iii) T < T_g. Onset of Kondo breakdown below T^{*} releases disorder-driven magnetic fluctuations, which splits the bulk (sim116K) and surface Kondo temperature (T_k^{s} approx 7 K). Below T_g, as magnetic fluctuations subside, surface Kondo screening revives, stabilizing the topological surface state and generating an in-gap feature (sim2.2 meV) across which Dirac-like carriers are excited. Nyquist impedance analysis reveals a crossover from purely capacitive to capacitive-inductive behavior, signalling a disorder-driven two-fluid phase of heavy quasiparticles and light, high-mobility carriers below T_g. We identify a characteristic length scale, L_{ν_0}(T), associated with the high-mobility phase, exhibiting an almost divergent trend below T_k^{s}. These findings underscore the complex nature of the surface conducting state in SmB_6.
Predictive power of the Berezinskii-Kosterlitz-Thouless theory based on Renormalization Group throughout the BCS-BEC crossover in 2D superconductors
Recent experiments on 2D superconductors allow the characterization of the critical temperature and of the phase diagram across the BCS-BEC crossover as a function of density. We obtain from these experiments the microscopic parameters of the superconducting state at low temperatures by the BCS mean-field approach. For Li_xZrNCl, the extracted parameters are used to evaluate the superconducting phase stiffness and the Berezinskii-Kosterlitz-Thouless (BKT) critical temperature throughout the BCS-BEC crossover, by implementing the corresponding Renormalization Group (RG) approach. In this way, we make a quantitative test of the predictive power of the BKT theory for evaluating the critical temperature. The RG flow equations turn out to give a sizable renormalization of the phase stiffness and of the critical temperature, which is crucial to obtain a satisfactory agreement between the BKT theory and the experiments, in particular in the BCS-BEC crossover regime. We predict the temperature range where phase stiffness renormalization can be measured in Li_xZrNCl across the BCS-BEC crossover. Contrary to other microscopic theories of superconductivity, we find that the BKT theory can be exploited to evaluate quantitatively the critical temperature of 2D superconductors in different pairing regimes.
Microwave Quantum Memcapacitor Effect
Developing the field of neuromorphic quantum computing necessitates designing scalable quantum memory devices. Here, we propose a superconducting quantum memory device in the microwave regime, termed as a microwave quantum memcapacitor. It comprises two linked resonators, the primary one is coupled to a Superconducting Quantum Interference Device, which allows for the modulation of the resonator properties through external magnetic flux. The auxiliary resonator, operated through weak measurements, provides feedback to the primary resonator, ensuring stable memory behaviour. This device operates with a classical input in one cavity while reading the response in the other, serving as a fundamental building block toward arrays of microwave quantum memcapacitors. We observe that a bipartite setup can retain its memory behaviour and gains entanglement and quantum correlations. Our findings pave the way for the experimental implementation of memcapacitive superconducting quantum devices and memory device arrays for neuromorphic quantum computing.
Thermal response of the iron-based Ba122 superconductor to in situ and ex situ processes
The thermal properties are one of the key parameters to control phase purity and microstructure of polycrystalline materials. The melting point of the iron-based BaFe2As2 superconductor (Ba122), which foresees high-field applications, remains controversial. In this work, thermogravimetry-differential scanning calorimetry measurements (TG-DSC) of undoped and Co-doped Ba122 were carried out. Mixtures of elemental metals and pre-reacted Ba122 powders were prepared to investigate the thermal responses during in situ and ex situ synthesis routes, respectively. In addition, the phases and microstructures of the quenched samples were evaluated to elucidate the observed exothermic/endothermic peaks. Our results suggest that the melting point of Ba122 is ~1300°C.
