id int64 1 705 | title stringlengths 26 204 | doi stringlengths 20 26 | authors stringlengths 0 292 | abstract stringlengths 116 500 | category stringclasses 1
value | intelligence_url stringlengths 58 236 |
|---|---|---|---|---|---|---|
1 | Achieving 20% Toluene-Processed Binary Organic Solar Cells via Secondary Regulation of Donor Aggregation in Sequential Processing | 10.1007/s40820-025-01715-2 | Yufei Wang, Chuanlin Gao, Wen Lei, Tao Yang, Zezhou Liang, Kangbo Sun, Chaoyue Zhao, Lu Chen, Liangxiang Zhu, Haoxuan Zeng, Xiaokang Sun, Bin He, Hanlin Hu, Zeguo Tang, Mingxia Qiu, Shunpu Li, Peigang Han, Guangye Zhang | Sequential processing (SqP) of the active layer offers independent optimization of the donor and acceptor with more targeted solvent design, which is considered the most promising strategy for achieving efficient organic solar cells (OSCs). In the SqP method, the favorable interpenetrating network seriously depends on ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/achieving-20-toluene-processed-binary-organic-solar-cells-via-secondary-regulation-of-donor-aggregation-in-sequential-processing |
2 | Integrating Hard Silicon for High-Performance Soft Electronics via Geometry Engineering | 10.1007/s40820-025-01724-1 | Lei Yan, Zongguang Liu, Junzhuan Wang, Linwei Yu | Soft electronics, which are designed to function under mechanical deformation (such as bending, stretching, and folding), have become essential in applications like wearable electronics, artificial skin, and brain-machine interfaces. Crystalline silicon is one of the most mature and reliable materials for high-performa... | Materials Science & Metallurgy | https://sinotechintel.com/paper/integrating-hard-silicon-for-high-performance-soft-electronics-via-geometry-engineering |
3 | Review on MXenes-Based Electrocatalysts for High-Energy-Density Lithium–Sulfur Batteries | 10.1007/s40820-025-01726-z | Xintao Zuo, Yanhui Qiu, Mengmeng Zhen, Dapeng Liu, Yu Zhang | Lithium–sulfur batteries (LSBs) hold significant promise as advanced energy storage systems due to their high energy density, low cost, and environmental advantages. However, despite recent advancements, their practical energy density still falls short of the levels required for commercial viability. The energy density... | Materials Science & Metallurgy | https://sinotechintel.com/paper/review-on-mxenes-based-electrocatalysts-for-high-energy-density-lithiumsulfur-batteries |
4 | Molecular Mechanism Behind the Capture of Fluorinated Gases by Metal–Organic Frameworks | 10.1007/s40820-024-01584-1 | Qian Wang, Yong Hu, Yifan Gu | Fluorinated gases (F-gases) play a vital role in the chemical industry and in the fields of air conditioning, refrigeration, health care, and organic synthesis. However, the direct emission of waste gases containing F-gases into the atmosphere contributes to greenhouse effects and generates toxic substances. Developing... | Materials Science & Metallurgy | https://sinotechintel.com/paper/molecular-mechanism-behind-the-capture-of-fluorinated-gases-by-metalorganic-frameworks |
5 | NH4+-Modulated Cathodic Interfacial Spatial Charge Redistribution for High-Performance Dual-Ion Capacitors | 10.1007/s40820-025-01660-0 | Yumin Chen, Ziyang Song, Yaokang Lv, Lihua Gan, Mingxian Liu | Compared with Zn2+, the current mainly reported charge carrier for zinc hybrid capacitors, small-hydrated-sized and light-weight NH4+ is expected as a better one to mediate cathodic interfacial electrochemical behaviors, yet has not been unraveled. Here we propose an NH4+-modulated cationic solvation strategy to optimi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/nh4-modulated-cathodic-interfacial-spatial-charge-redistribution-for-high-performance-dual-ion-capacitors |
6 | Comparison of partially averaged Navier-Stokes and large eddy simulation of the aerodynamic behaviors of a generic high-speed train | 10.1007/s11771-025-6143-8 | DONG Tian-yun, MINELLI Guglielmo, WANG Jia-bin, BASARA Branislav, KRAJNOVIĆ Sinisa | This paper investigates the influence of numerical methods and mesh resolution on the prediction accuracy of the aerodynamic behaviors of a 1/20 scaled generic high-speed train (HST) model. A thorough comparison is made between partially averaged Navier-Stokes (PANS), large eddy simulation (LES), and wind tunnel experi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/comparison-of-partially-averaged-navier-stokes-and-large-eddy-simulation-of-the-aerodynamic-behaviors-of-a-generic-high-speed-train |
7 | A Multifunctional Hydrogel with Multimodal Self-Powered Sensing Capability and Stable Direct Current Output for Outdoor Plant Monitoring Systems | 10.1007/s40820-024-01587-y | Xinge Guo, Luwei Wang, Zhenyang Jin, Chengkuo Lee | Smart farming with outdoor monitoring systems is critical to address food shortages and sustainability challenges. These systems facilitate informed decisions that enhance efficiency in broader environmental management. Existing outdoor systems equipped with energy harvesters and self-powered sensors often struggle wit... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-multifunctional-hydrogel-with-multimodal-self-powered-sensing-capability-and-stable-direct-current-output-for-outdoor-plant-monitoring-systems |
8 | Direct Repair of the Crystal Structure and Coating Surface of Spent LiFePO4 Materials Enables Superfast Li-Ion Migration | 10.1007/s40820-025-01980-1 | Yuanqi Lan, Jianfeng Wen, Yatian Zhang, Xuexia Lan, Tianyi Song, Jie Zhu, Jing Peng, Wenjiao Yao, Yongbing Tang, Hui-Ming Cheng | The rapid accumulation of spent LiFePO4 (LFP) cathodes from retired lithium-ion batteries necessitates the development of effective and environmental-friendly recycling strategies. In this context, direct regeneration has emerged as a promising approach for reclaiming LFP cathode materials, offering a streamlined pathw... | Materials Science & Metallurgy | https://sinotechintel.com/paper/direct-repair-of-the-crystal-structure-and-coating-surface-of-spent-lifepo4-materials-enables-superfast-li-ion-migration |
9 | Breaking Solvation Dominance Effect Enabled by Ion–Dipole Interaction Toward Long-Spanlife Silicon Oxide Anodes in Lithium-Ion Batteries | 10.1007/s40820-024-01592-1 | Shengwei Dong, Lingfeng Shi, Shenglu Geng, Yanbin Ning, Cong Kang, Yan Zhang, Ziwei Liu, Jiaming Zhu, Zhuomin Qiang, Lin Zhou, Geping Yin, Dalong Li, Tiansheng Mu, Shuaifeng Lou | Micrometer-sized silicon oxide (SiO) anodes encounter challenges in large-scale applications due to significant volume expansion during the alloy/de-alloy process. Herein, an innovative deep eutectic electrolyte derived from succinonitrile is introduced to enhance the cycling stability of SiO anodes. Density functional... | Materials Science & Metallurgy | https://sinotechintel.com/paper/breaking-solvation-dominance-effect-enabled-by-iondipole-interaction-toward-long-spanlife-silicon-oxide-anodes-in-lithium-ion-batteries |
10 | Oxide Semiconductor for Advanced Memory Architectures: Atomic Layer Deposition, Key Requirement and Challenges | 10.1007/s40820-025-02013-7 | Chi-Hoon Lee, Seong-Hwan Ryu, Taewon Hwang, Sang-Hyun Kim, Yoon-Seo Kim, Jin-Seong Park | Oxide semiconductors (OSs), introduced by the Hosono group in the early 2000s, have evolved from display backplane materials to promising candidates for advanced memory and logic devices. The exceptionally low leakage current of OSs and compatibility with three-dimensional (3D) architectures have recently sparked renew... | Materials Science & Metallurgy | https://sinotechintel.com/paper/oxide-semiconductor-for-advanced-memory-architectures-atomic-layer-deposition-key-requirement-and-challenges |
11 | Advances in Robotic Peg-in-Hole Assembly: A Comprehensive Review | 10.1186/s10033-025-01349-w | Shanglin Li, Hao Gong, Jianhua Liu, Jiakai Li, Xinjian Deng | As the demands for assembly quality and efficiency increase, robot-assisted assembly applications are becoming more widespread. Peg-in-hole assembly, as a typical form of assembly, has been widely researched by scholars. Currently, robotic peg-in-hole assembly faces challenges such as complex analysis of part contact f... | Materials Science & Metallurgy | https://sinotechintel.com/paper/advances-in-robotic-peg-in-hole-assembly-a-comprehensive-review |
12 | A novel leeward airbag for enhancing aerodynamic characteristics of a high-speed train in crosswind: The effect of installation positions | 10.1007/s11771-025-6050-z | XU Ao, HUANG Feng-yi, LIU Tang-hong, XIONG Xiao-hui | The aerodynamic performance of a high-speed train deteriorates sharply under crosswind, severely affecting its operational safety. This paper adopted a three-car high-speed train as the benchmark and established leeward side (LWS) airbag-train models. Based on the three-dimensional steady SST k-ω two-equation turbulenc... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-novel-leeward-airbag-for-enhancing-aerodynamic-characteristics-of-a-high-speed-train-in-crosswind-the-effect-of-installation-positions |
13 | Robust Tube-MPC Trajectory Tracking Control for Four-Wheel Independent Steering Vehicles on Intermittent Snowy and Icy Roads | 10.1186/s10033-025-01232-8 | Xiaochuan Zhou, Ruiqi Liu, Jinyu Zhou, Ziyu Zhang, Chunyan Wang, Wanzhong Zhao | Four-Wheel Independent Steering (4WIS) Vehicles can independently control the angle of each wheel, demonstrating superior trajectory tracking performance under normal conditions. However, on intermittent icy and snowy roads, the presence of time-varying adhesion coefficients, time-varying cornering stiffness, and the i... | Materials Science & Metallurgy | https://sinotechintel.com/paper/robust-tube-mpc-trajectory-tracking-control-for-four-wheel-independent-steering-vehicles-on-intermittent-snowy-and-icy-roads |
14 | Learning Manipulation from Expert Demonstrations Based on Multiple Data Associations and Physical Constraints | 10.1186/s10033-025-01204-y | Yangqing Ye, Yaojie Mao, Shiming Qiu, Chuan’guo Tang, Zhirui Pan, Weiwei Wan, Shibo Cai, Guanjun Bao | Learning from demonstration is widely regarded as a promising paradigm for robots to acquire diverse skills. Other than the artificial learning from observation-action pairs for machines, humans can learn to imitate in a more versatile and effective manner: acquiring skills through mere “observation”. Video to Command ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/learning-manipulation-from-expert-demonstrations-based-on-multiple-data-associations-and-physical-constraints |
15 | Laser powder bed fusion of biodegradable Zn-4Cu alloy: Processing, microstructure and properties | 10.1007/s11771-026-6173-x | WANG Han-dan, ZHAO Yang, DONG An-ping, HE Lin, SHUAI Ci-jun, GAO Cheng-de | Zn's natural degradability and biocompatibility make it a promising candidate for implants, however, its mechanical properties remain insufficient for bone applications. In this study, the performance of Zn was enhanced by developing Zn-Cu alloys via laser powder bed fusion (LPBF). Optimal LPBF parameters for forming s... | Materials Science & Metallurgy | https://sinotechintel.com/paper/laser-powder-bed-fusion-of-biodegradable-zn-4cu-alloy-processing-microstructure-and-properties |
16 | Instantaneous transition of composition and morphology of inclusions with an initial Al2O3 composition in the molten steel during calcium treatment | 10.1007/s12613-025-3101-2 | Guojun Chen, Hejun Zhang, Ying Ren, Lifeng Zhang | The instantaneous morphological transition of triangular Al2O3 particles with various sizes in the molten Ca-treated steel was observed using a confocal scanning laser microscope at the steelmaking temperature. The composition of inclusions at different times was analyzed using scanning electron microscopy–energy dispe... | Materials Science & Metallurgy | https://sinotechintel.com/paper/instantaneous-transition-of-composition-and-morphology-of-inclusions-with-an-initial-al2o3-composition-in-the-molten-steel-during-calcium-treatment |
17 | High-cycle fatigue life improvement of a PtAl-coated third-generation Ni-based single-crystal superalloy after thermal exposure | 10.1007/s12613-025-3157-z | Dong Sun, Siliang He, Longfei Li, Song Lu, Weiwei Zheng, Jonathan Cormier, Qiang Feng | The as-deposited coating–substrate microstructure has been identified to substantially influence the high-cycle fatigue (HCF) behavior of Ni-based single-crystal (SX) superalloys at 900°C, but the impact of degraded microstructure on the HCF behavior remains unclear. In this work, a PtAl-coated third-generation SX supe... | Materials Science & Metallurgy | https://sinotechintel.com/paper/high-cycle-fatigue-life-improvement-of-a-ptal-coated-third-generation-ni-based-single-crystal-superalloy-after-thermal-exposure |
18 | Strength–ductility synergy strategy of Ti6Al4V alloy fabricated by metal injection molding | 10.1007/s12613-024-3023-4 | Jianzhuo Sun, Yu Pan, Yanjun Liu, Fan Kuang, Ranpeng Lu, Xin Lu | Interstitial oxygen (O) contamination remains a substantial challenge for metal injection molding (MIM) of titanium alloys. Herein, this critical problem is successfully addressed by regulating the thermal debinding temperature and incorporating the oxygen scavenger LaB6. Results indicate that the surface oxide layer (... | Materials Science & Metallurgy | https://sinotechintel.com/paper/strengthductility-synergy-strategy-of-ti6al4v-alloy-fabricated-by-metal-injection-molding |
19 | A novel fluorescence turn-on sensor for Cr3+ based on fluorescence resonance energy transfer between gold nanoparticles and rhodamine B | 10.1007/s12613-024-3010-9 | Qin Ma, Lin Shi, Baocheng Ran, Tianfeng Ma, Huan Wang, Yongchang Lu | Up to now, “Turn-on” fluorescence sensor exhibits promising potential toward the detection of heavy metal ions, anions, drugs, organic dyes, DNA, pesticides, and other amino acids due to their simple, quick detection, and high sensitivity and selectivity. Herein, a novel fluorescence method of detecting Cr3+ in an aque... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-novel-fluorescence-turn-on-sensor-for-cr3-based-on-fluorescence-resonance-energy-transfer-between-gold-nanoparticles-and-rhodamine-b |
20 | Pressure-driven Mn solubility enhancement in Zn alloy: Synergistic strengthening and reduced corrosion rate for biomedical application | 10.1007/s11771-026-6161-1 | LU Gang, DAI Yi-long, LEI Xiao-li, GUO Lin, ZHANG De-chuang, LIN Jian-guo | Zn-Mn alloys are regarded as promising biodegradable metals for orthopedic applications owing to their moderate degradation rates and favorable osteogenic properties. However, the presence of a substantial number of second-phase particles in Zn-based alloys might induce severe localized degradation via micro-coupling c... | Materials Science & Metallurgy | https://sinotechintel.com/paper/pressure-driven-mn-solubility-enhancement-in-zn-alloy-synergistic-strengthening-and-reduced-corrosion-rate-for-biomedical-application |
21 | Rapid identification method for inclusions in evaluating high-purity quartz | 10.1007/s12613-024-3066-6 | Min Liu, Guocheng Lv, Xin Liu, Zijie Ren, Meitang Liu, Ritong Huang, Xinyu Hou, Qinwen Zheng, Libing Liao, Jingwen Mao | The rapid growth of semiconductor, photovoltaic, and other emerging industries has led to a sharp increase in the demand for high-purity quartz in China, particularly 4N5-grade (99.995% pure SiO2). However, heavy reliance on imported high-purity quartz poses a significant risk to the security of key national strategic ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/rapid-identification-method-for-inclusions-in-evaluating-high-purity-quartz |
22 | Controllable synthesis and structure-activity relationship of Ni doping in SmCrO3 for improved magnetic and dielectric properties | 10.1007/s12613-025-3099-5 | Wenjie Huang, Rui Li, Ruoxuan Zhang, Yimin Cui, Rongming Wang | Doping small amounts at the A-site or B-site of SmCrO3 ceramics is a promising approach for modifying their microstructure, as well as their magnetic and dielectric properties. In this study, polycrystalline ceramics of Sm1−xNixCrO3 (x = 0, 0.05, and 0.20) and SmCr1−yNiyO3 (y = 0.05 and 0.20) were synthesized via a con... | Materials Science & Metallurgy | https://sinotechintel.com/paper/controllable-synthesis-and-structure-activity-relationship-of-ni-doping-in-smcro3-for-improved-magnetic-and-dielectric-properties |
23 | Effect of 5wt% Fe3O4 addition on the phase equilibria of the CaO–SiO2–TiO2 system at 1400°C in air | 10.1007/s12613-024-2971-z | Junjie Shi, Chenglong Jiang, Yifei Cao, Yumo Zhai, Yuchao Qiu, Hangkai Shi, Maoxi Yao, Jianzhong Li | The equilibrium phase relations of the CaO–SiO2–TiO2–5wt%Fe3O4 system were experimentally investigated at 1400°C in air. High-temperature equilibration-quenching techniques were employed in an electric MoSi2 resistance heated furnace, with phase composition analysis conducted using an electron probe microanalyzer and X... | Materials Science & Metallurgy | https://sinotechintel.com/paper/effect-of-5wt-fe3o4-addition-on-the-phase-equilibria-of-the-caosio2tio2-system-at-1400c-in-air |
24 | B-coating modulation strategy serving ultrahigh nickel cathodes | 10.1007/s12613-025-3093-y | Aoyu Zhang, Lida Song, Zhaoyang Dong, Runguo Zheng, Zhishuang Song, Yanguo Liu, Jingsheng Xu, Zhiyuan Wang | To satisfy the demand for low-cost and long-range electric vehicles by the market, the commercialization of ultrahigh nickel cathode materials with high specific capacity and a wide electrochemical window is expected to facilitate the development of lithium-ion batteries. However, residual lithium compounds with a stro... | Materials Science & Metallurgy | https://sinotechintel.com/paper/b-coating-modulation-strategy-serving-ultrahigh-nickel-cathodes |
25 | Host–Guest Inversion Engineering Induced Superionic Composite Solid Electrolytes for High-Rate Solid-State Alkali Metal Batteries | 10.1007/s40820-025-01691-7 | Xiong Xiong Liu, Long Pan, Haotian Zhang, Pengcheng Yuan, Mufan Cao, Yaping Wang, Zeyuan Xu, Min Gao, Zheng Ming Sun | Composite solid electrolytes (CSEs) are promising for solid-state Li metal batteries but suffer from inferior room-temperature ionic conductivity due to sluggish ion transport and high cost due to expensive active ceramic fillers. Here, a host–guest inversion engineering strategy is proposed to develop superionic CSEs ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/hostguest-inversion-engineering-induced-superionic-composite-solid-electrolytes-for-high-rate-solid-state-alkali-metal-batteries |
26 | An Ultra-Thin Wearable Thermoelectric Paster Based on Structured Organic Ion Gel Electrolyte | 10.1007/s40820-025-01721-4 | Zhijian Du, La Li, Guozhen Shen | Thermoelectric technology that utilizes thermodynamic effects to convert thermal energy into electrical energy has greatly expanded wearable health monitoring, personalized detecting, and communicating applications. Encouragingly, thermoelectric technology assisted by artificial intelligence exerts great development po... | Materials Science & Metallurgy | https://sinotechintel.com/paper/an-ultra-thin-wearable-thermoelectric-paster-based-on-structured-organic-ion-gel-electrolyte |
27 | Durable Acidic Oxygen Evolution Via Self-Construction of Iridium Oxide/Iridium-Tantalum Oxide Bi-Layer Nanostructure with Dynamic Replenishment of Active Sites | 10.1007/s40820-025-01680-w | Qi Guo, Rui Li, Yanan Zhang, Qiqin Zhang, Yi He, Zhibin Li, Weihong Liu, Xiongjun Liu, Zhaoping Lu | Proton exchange membrane (PEM) water electrolysis presents considerable advantages in green hydrogen production. Nevertheless, oxygen evolution reaction (OER) catalysts in PEM water electrolysis currently encounter several pressing challenges, including high noble metal loading, low mass activity, and inadequate durabi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/durable-acidic-oxygen-evolution-via-self-construction-of-iridium-oxideiridium-tantalum-oxide-bi-layer-nanostructure-with-dynamic-replenishment-of-active-sites |
28 | In Situ Partial-Cyclized Polymerized Acrylonitrile-Coated NCM811 Cathode for High-Temperature ≥ 100 °C Stable Solid-State Lithium Metal Batteries | 10.1007/s40820-025-01683-7 | Jiayi Zheng, Haolong Jiang, Xieyu Xu, Jie Zhao, Xia Ma, Weiwei Sun, Shuangke Liu, Wei Xie, Yufang Chen, ShiZhao Xiong, Hui Wang, Kai Xie, Yu Han, Maoyi Yi, Chunman Zheng, Qingpeng Guo | High-nickel ternary cathodes hold a great application prospect in solid-state lithium metal batteries to achieve high-energy density, but they still suffer from structural instability and detrimental side reactions with the solid-state electrolytes. To circumvent these issues, a continuous uniform layer polyacrylonitri... | Materials Science & Metallurgy | https://sinotechintel.com/paper/in-situ-partial-cyclized-polymerized-acrylonitrile-coated-ncm811-cathode-for-high-temperature-100-c-stable-solid-state-lithium-metal-batteries |
29 | Manipulating Interfacial Stability via Preferential Absorption for Highly Stable and Safe 4.6 V LiCoO2 Cathode | 10.1007/s40820-025-01694-4 | Long Chen, Xin He, Yiqing Chen, Youmin Hou, Yujie Zhang, Kangli Wang, Xinping Ai, Yuliang Cao, Zhongxue Chen | Elevating the upper cutoff voltage to 4.6 V could effectively increase the reversible capacity of LiCoO2 (LCO) cathode, whereas the irreversible structural transition, unstable electrode/electrolyte interface and potentially induced safety hazards severely hinder its industrial application. Building a robust cathode/el... | Materials Science & Metallurgy | https://sinotechintel.com/paper/manipulating-interfacial-stability-via-preferential-absorption-for-highly-stable-and-safe-46-v-licoo2-cathode |
30 | Quantum Dots Mediated Crystallization Enhancement in Two-Step Processed Perovskite Solar Cells | 10.1007/s40820-025-01677-5 | Heng Liu, Geyu Jin, Jiantao Wang, Weihai Zhang, Long Qing, Yao Zhang, Qiongqiong Lu, Pengfei Yue, Guoshang Zhang, Jing Wei, Hongbo Li, Hsing-Lin Wang | Hybrid organic–inorganic lead halide perovskites have emerged as a promising material for high-efficiency solar cells, yet challenges related to crystallization and defects limit their performance and stability. This study investigates the use of perovskite quantum dots (QDs) as crystallization seeds to enhance the qua... | Materials Science & Metallurgy | https://sinotechintel.com/paper/quantum-dots-mediated-crystallization-enhancement-in-two-step-processed-perovskite-solar-cells |
31 | Tailoring the Reversible Phase Transition of Perovskite Nanofiber Electrodes for High-Performance and Durable Reversible Solid Oxide Cells | 10.1007/s40820-024-01600-4 | Chaofan Yin, Jiaming Yang, Jiangyuan Feng, Yueyue Sun, Zhengrong Liu, Junkai Wang, Jiajia Cui, Zixuan Xue, Liang Zhang, Yucun Zhou, Jun Zhou, Liangfei Xu, Kai Wu, Jianqiu Li | Reversible solid oxide cells (RSOCs) are capable of converting various energy resources, between electricity and chemical fuels, with high efficiency and flexibility, making them suitable for grid balancing and renewable energy consumption. However, the practical application of RSOCs is still limited by the insufficien... | Materials Science & Metallurgy | https://sinotechintel.com/paper/tailoring-the-reversible-phase-transition-of-perovskite-nanofiber-electrodes-for-high-performance-and-durable-reversible-solid-oxide-cells |
32 | Construction of Multifunctional Conductive Carbon-Based Cathode Additives for Boosting Li6PS5Cl-Based All-Solid-State Lithium Batteries | 10.1007/s40820-025-01667-7 | Xin Gao, Ya Chen, Zheng Zhen, Lifeng Cui, Ling Huang, Xiao Chen, Jiayi Chen, Xiaodong Chen, Duu-Jong Lee, Guoxiu Wang | The electrochemical performance of all-solid-state lithium batteries (ASSLBs) can be prominently enhanced by minimizing the detrimental degradation of solid electrolytes through their undesirable side reactions with the conductive carbon additives (CCAs) inside the composite cathodes. Herein, the well-defined Mo3Ni3N n... | Materials Science & Metallurgy | https://sinotechintel.com/paper/construction-of-multifunctional-conductive-carbon-based-cathode-additives-for-boosting-li6ps5cl-based-all-solid-state-lithium-batteries |
33 | Advances in Anion Chemistry in the Electrolyte Design for Better Lithium Batteries | 10.1007/s40820-024-01629-5 | Hecong Xiao, Xiang Li, Yongzhu Fu | Electrolytes are crucial components in electrochemical energy storage devices, sparking considerable research interest. However, the significance of anions in the electrolytes is often underestimated. In fact, the anions have significant impacts on the performance and stability of lithium batteries. Therefore, comprehe... | Materials Science & Metallurgy | https://sinotechintel.com/paper/advances-in-anion-chemistry-in-the-electrolyte-design-for-better-lithium-batteries |
34 | Highly Thermally Conductive and Flame-Retardant Waterborne Polyurethane Composites with 3D BNNS Bridging Structures via Magnetic Field Assistance | 10.1007/s40820-025-01651-1 | Hao Jiang, Yuhui Xie, Mukun He, Jindao Li, Feng Wu, Hua Guo, Yongqiang Guo, Delong Xie, Yi Mei, Junwei Gu | The microstructure design for thermal conduction pathways in polymeric electrical encapsulation materials is essential to meet the stringent requirements for efficient thermal management and thermal runaway safety in modern electronic devices. Hence, a composite with three-dimensional network (Ho/U-BNNS/WPU) is develop... | Materials Science & Metallurgy | https://sinotechintel.com/paper/highly-thermally-conductive-and-flame-retardant-waterborne-polyurethane-composites-with-3d-bnns-bridging-structures-via-magnetic-field-assistance |
35 | Zn(TFSI)2-Mediated Ring-Opening Polymerization for Electrolyte Engineering Toward Stable Aqueous Zinc Metal Batteries | 10.1007/s40820-025-01649-9 | Zhenjie Liu, Murong Xi, Rui Sheng, Yudai Huang, Juan Ding, Zhouliang Tan, Jiapei Li, Wenjun Zhang, Yonggang Wang | Practical Zn metal batteries have been hindered by several challenges, including Zn dendrite growth, undesirable side reactions, and unstable electrode/electrolyte interface. These issues are particularly more serious in low-concentration electrolytes. Herein, we design a Zn salt-mediated electrolyte with in situ ring-... | Materials Science & Metallurgy | https://sinotechintel.com/paper/zntfsi2-mediated-ring-opening-polymerization-for-electrolyte-engineering-toward-stable-aqueous-zinc-metal-batteries |
36 | Top-Down Dual-Interface Carrier Management for Highly Efficient and Stable Perovskite/Silicon Tandem Solar Cells | 10.1007/s40820-024-01631-x | Xin Li, Zhiqin Ying, Shuo Li, Lei Chen, Meili Zhang, Linhui Liu, Xuchao Guo, Jun Wu, Yihan Sun, Chuanxiao Xiao, Yuheng Zeng, Jian Wu, Xi Yang, Jichun Ye | Despite significant advancements in the power conversion efficiency (PCE) of perovskite/silicon tandem solar cells, improving carrier management in top cells remains challenging due to the defective dual interfaces of wide-bandgap perovskite, particularly on textured silicon surfaces. Herein, a series of halide ions (C... | Materials Science & Metallurgy | https://sinotechintel.com/paper/top-down-dual-interface-carrier-management-for-highly-efficient-and-stable-perovskitesilicon-tandem-solar-cells |
37 | Understanding the Decoupled Effects of Cations and Anions Doping for High-Performance Perovskite Solar Cells | 10.1007/s40820-025-01655-x | Tianxiang Hu, Yixi Wang, Kai Liu, Jia Liu, Haoyang Zhang, Qudrat Ullah Khan, Shijie Dai, Weifan Qian, Ruochen Liu, Yanyan Wang, Chongyuan Li, Zhenru Zhang, Mingxiang Luo, Xiaofei Yue, Chunxiao Cong, Yuan Yongbo, Anran Yu, Jia Zhang, Yiqiang Zhan | The past decade has witnessed the rapid increasement in power conversion efficiency of perovskite solar cells (PSCs). However, serious ion migration hampers their operational stability. Although dopants composed of varied cations and anions are introduced into perovskite to suppress ion migration, the impact of cations... | Materials Science & Metallurgy | https://sinotechintel.com/paper/understanding-the-decoupled-effects-of-cations-and-anions-doping-for-high-performance-perovskite-solar-cells |
38 | Functionalized Separators Boosting Electrochemical Performances for Lithium Batteries | 10.1007/s40820-024-01596-x | Zixin Fan, Xiaoyu Chen, Jingjing Shi, Hui Nie, Xiaoming Zhang, Xingping Zhou, Xiaolin Xie, Zhigang Xue | The growing demands for energy storage systems, electric vehicles, and portable electronics have significantly pushed forward the need for safe and reliable lithium batteries. It is essential to design functional separators with improved mechanical and electrochemical characteristics. This review covers the improved me... | Materials Science & Metallurgy | https://sinotechintel.com/paper/functionalized-separators-boosting-electrochemical-performances-for-lithium-batteries |
39 | Electromagnetic Functions Modulation of Recycled By-Products by Heterodimensional Structure | 10.1007/s40820-025-01659-7 | Ze Nan, Wei Wei, Zhenhua Lin, Ruimei Yuan, Miao Zhang, Jincheng Zhang, Jianyong Ouyang, Jingjing Chang, Hejun Li, Yue Hao | One of the significant technological challenges in safeguarding electronic devices pertains to the modulation of electromagnetic (EM) wave jamming and the recycling of defensive shields. The synergistic effect of heterodimensional materials can effectively enable the manipulation of EM waves by altering the nanostructu... | Materials Science & Metallurgy | https://sinotechintel.com/paper/electromagnetic-functions-modulation-of-recycled-by-products-by-heterodimensional-structure |
40 | Carbon Dots-Modified Hollow Mesoporous Photonic Crystal Materials for Sensitivity- and Selectivity-Enhanced Sensing of Chloroform Vapor | 10.1007/s40820-024-01598-9 | Junchen Liu, Ji Liu, Zhipeng Li, Liupeng Zhao, Tianshuang Wang, Xu Yan, Fangmeng Liu, Xiaomin Li, Qin Li, Peng Sun, Geyu Lu, Dongyuan Zhao | Chloroform and other volatile organic pollutants have garnered widespread attention from the public and researchers, because of their potential harm to the respiratory system, nervous system, skin, and eyes. However, research on chloroform vapor sensing is still in its early stages, primarily due to the lack of specifi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/carbon-dots-modified-hollow-mesoporous-photonic-crystal-materials-for-sensitivity-and-selectivity-enhanced-sensing-of-chloroform-vapor |
41 | Skin-Friendly Large Matrix Iontronic Sensing Meta-Fabric for Spasticity Visualization and Rehabilitation Training via Piezo-Ionic Dynamics | 10.1007/s40820-024-01566-3 | Ruidong Xu, Tong Xu, Minghua She, Xinran Ji, Ganghua Li, Shijin Zhang, Xinwei Zhang, Hong Liu, Bin Sun, Guozhen Shen, Mingwei Tian | Rehabilitation training is believed to be an effectual strategy that can reduce the risk of dysfunction caused by spasticity. However, achieving visualization rehabilitation training for patients remains clinically challenging. Herein, we propose visual rehabilitation training system including iontronic meta-fabrics wi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/skin-friendly-large-matrix-iontronic-sensing-meta-fabric-for-spasticity-visualization-and-rehabilitation-training-via-piezo-ionic-dynamics |
42 | Plant Cell Wall-Like Soft Materials: Micro- and Nanoengineering, Properties, and Applications | 10.1007/s40820-024-01569-0 | Roya Koshani, Mica L. Pitcher, Jingyi Yu, Christine L. Mahajan, Seong H. Kim, Amir Sheikhi | Plant cell wall (CW)-like soft materials, referred to as artificial CWs, are composites of assembled polymers containing micro-/nanoparticles or fibers/fibrils that are designed to mimic the composition, structure, and mechanics of plant CWs. CW-like materials have recently emerged to test hypotheses pertaining to the ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/plant-cell-wall-like-soft-materials-micro-and-nanoengineering-properties-and-applications |
43 | Anti-Swelling Polyelectrolyte Hydrogel with Submillimeter Lateral Confinement for Osmotic Energy Conversion | 10.1007/s40820-024-01577-0 | Yongxu Liu, Jiangnan Song, Zhen Liu, Jialin Chen, Dejuan Wang, Hui Zhi, Jiebin Tang, Yafang Zhang, Ningbo Li, Weijia Zhou, Meng An, Hong Liu, Guobin Xue | Harvesting the immense and renewable osmotic energy with reverse electrodialysis (RED) technology shows great promise in dealing with the ever-growing energy crisis. One key challenge is to improve the output power density with improved trade-off between membrane permeability and selectivity. Herein, polyelectrolyte hy... | Materials Science & Metallurgy | https://sinotechintel.com/paper/anti-swelling-polyelectrolyte-hydrogel-with-submillimeter-lateral-confinement-for-osmotic-energy-conversion |
44 | Low-Temperature Oxidation Induced Phase Evolution with Gradient Magnetic Heterointerfaces for Superior Electromagnetic Wave Absorption | 10.1007/s40820-024-01516-z | Zizhuang He, Lingzi Shi, Ran Sun, Lianfei Ding, Mukun He, Jiaming Li, Hua Guo, Tiande Gao, Panbo Liu | Gradient magnetic heterointerfaces have injected infinite vitality in optimizing impedance matching, adjusting dielectric/magnetic resonance and promoting electromagnetic (EM) wave absorption, but still exist a significant challenging in regulating local phase evolution. Herein, accordion-shaped Co/Co3O4@N-doped carbon... | Materials Science & Metallurgy | https://sinotechintel.com/paper/low-temperature-oxidation-induced-phase-evolution-with-gradient-magnetic-heterointerfaces-for-superior-electromagnetic-wave-absorption |
45 | MoS2 Lubricate-Toughened MXene/ANF Composites for Multifunctional Electromagnetic Interference Shielding | 10.1007/s40820-024-01496-0 | Jiaen Wang, Wei Ming, Longfu Chen, Tianliang Song, Moxi Yele, Hao Zhang, Long Yang, Gegen Sarula, Benliang Liang, Luting Yan, Guangsheng Wang | The design and fabrication of high toughness electromagnetic interference (EMI) shielding composite films with diminished reflection are an imperative task to solve electromagnetic pollution problem. Ternary MXene/ANF (aramid nanofibers)–MoS2 composite films with nacre-like layered structure here are fabricated after t... | Materials Science & Metallurgy | https://sinotechintel.com/paper/mos2-lubricate-toughened-mxeneanf-composites-for-multifunctional-electromagnetic-interference-shielding |
46 | Dual-Donor-Induced Crystallinity Modulation Enables 19.23% Efficiency Organic Solar Cells | 10.1007/s40820-024-01576-1 | Anhai Liang, Yuqing Sun, Sein Chung, Jiyeong Shin, Kangbo Sun, Chaofeng Zhu, Jingjing Zhao, Zhenmin Zhao, Yufei Zhong, Guangye Zhang, Kilwon Cho, Zhipeng Kan | Trap-assisted charge recombination is one of the primary limitations of restricting the performance of organic solar cells. However, effectively reducing the presence of traps in the photoactive layer remains challenging. Herein, wide bandgap polymer donor PTzBI-dF is demonstrated as an effective modulator for enhancin... | Materials Science & Metallurgy | https://sinotechintel.com/paper/dual-donor-induced-crystallinity-modulation-enables-1923-efficiency-organic-solar-cells |
47 | Ultra-High Sensitivity Anisotropic Piezoelectric Sensors for Structural Health Monitoring and Robotic Perception | 10.1007/s40820-024-01539-6 | Hao Yin, Yanting Li, Zhiying Tian, Qichao Li, Chenhui Jiang, Enfu Liang, Yiping Guo | Monitoring minuscule mechanical signals, both in magnitude and direction, is imperative in many application scenarios, e.g., structural health monitoring and robotic sensing systems. However, the piezoelectric sensor struggles to satisfy the requirements for directional recognition due to the limited piezoelectric coef... | Materials Science & Metallurgy | https://sinotechintel.com/paper/ultra-high-sensitivity-anisotropic-piezoelectric-sensors-for-structural-health-monitoring-and-robotic-perception |
48 | Advanced Functional Electromagnetic Shielding Materials: A Review Based on Micro-Nano Structure Interface Control of Biomass Cell Walls | 10.1007/s40820-024-01494-2 | Yang Shi, Mingjun Wu, Shengbo Ge, Jianzhang Li, Anoud Saud Alshammari, Jing Luo, Mohammed A. Amin, Hua Qiu, Jinxuan Jiang, Yazeed M. Asiri, Runzhou Huang, Hua Hou, Zeinhom M. El-Bahy, Zhanhu Guo, Chong Jia, Kaimeng Xu, Xiangmeng Chen | Research efforts on electromagnetic interference (EMI) shielding materials have begun to converge on green and sustainable biomass materials. These materials offer numerous advantages such as being lightweight, porous, and hierarchical. Due to their porous nature, interfacial compatibility, and electrical conductivity,... | Materials Science & Metallurgy | https://sinotechintel.com/paper/advanced-functional-electromagnetic-shielding-materials-a-review-based-on-micro-nano-structure-interface-control-of-biomass-cell-walls |
49 | Multiscale Design of Dual-Gradient Metamaterials Using Gel-Mediated 3D-Printed Graphene Aerogels for Broadband Electromagnetic Absorption | 10.1007/s40820-025-02005-7 | Xiong Lv, Changfeng Li, Ge Wang, Diana Estevez, Junjie Yang, Qian Chen, Faxiang Qin | Three-dimensional (3D)-printed graphene aerogels hold promise for electromagnetic wave absorption (EWA) engineering due to its ultralow density, outstanding electromagnetic dissipation with the flexibility and precision of manufacturing strategies. However, their high conductivity causes severe impedance mismatch, limi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/multiscale-design-of-dual-gradient-metamaterials-using-gel-mediated-3d-printed-graphene-aerogels-for-broadband-electromagnetic-absorption |
50 | Atomically Dispersed Pt-Ru Dual-Atom Catalysts for Efficient Low-Temperature CO Oxidation Reaction | 10.1007/s40820-025-01997-6 | Yanan Qi, Hongqiu Chen, Feng Hong, Xiangbin Cai, Zhehan Ying, Jiangyong Diao, Zhimin Jia, Jiawei Chen, Ning Wang, Shengling Xiang, Xiaowen Chen, Guodong Wen, Bo Sun, Geng Sun, Hongyang Liu | Single-atom catalysts (SACs) have demonstrated excellent performance in heterogeneous catalytic reactions owing to their maximized atomic efficiency, distinctive geometric, and electronic configurations. However, the efficacy of SACs remains limited for certain reactions requiring simultaneous activation of multiple re... | Materials Science & Metallurgy | https://sinotechintel.com/paper/atomically-dispersed-pt-ru-dual-atom-catalysts-for-efficient-low-temperature-co-oxidation-reaction |
51 | Synergistic Design of Flexible Nanopapers for High-Performance Proton Pseudocapacitors | 10.1007/s40820-025-01989-6 | Jiayue Dong, Zhaoqing Lu, Li Hua, Zizhan Guo, Xiaoxu Xu, Jinlong Wu, Fengfeng Jia, Yuanming Wang | Two-dimensional materials for flexible energy storage commonly face huge challenges in limited active surface and hindered charge transport. Herein, we report an innovative asymmetric pseudocapacitor based on synergistic design of modified MXene and graphene, integrating gas-induced rapid expansion technology and preci... | Materials Science & Metallurgy | https://sinotechintel.com/paper/synergistic-design-of-flexible-nanopapers-for-high-performance-proton-pseudocapacitors |
52 | Modulation of Trichromatic Emission Centers in Organic–Inorganic Hybrids for Optoelectronic Applications | 10.1007/s40820-025-01965-0 | Weidong Cai, Chongyuan Li, Qiang Guo, Fuxiang Ji, Muyi Zhang, Yiqiang Zhan | Organic–inorganic metal halides (OIMHs) have emerged as highly promising novel multifunctional optoelectronic materials, owing to their easily adjustable properties from a variety of combinations of different components. But it is still difficult and rare to realize highly tunable multicolor luminescence within the sam... | Materials Science & Metallurgy | https://sinotechintel.com/paper/modulation-of-trichromatic-emission-centers-in-organicinorganic-hybrids-for-optoelectronic-applications |
53 | Scalable-Designed Photonic Metamaterial for Color-Regulating Passive Daytime Radiative Cooling | 10.1007/s40820-025-01975-y | Xiao-Qing Yu, Fucheng Li, Jiawei Wang, Nianxiang Zhang, Guo-Xing Li, Yan Song, Qing Li, Su Chen | Methods allowing passive daytime radiative cooling (PDRC) to be carried out in an energy-efficient and scalable way are potentially important for various disciplines. Here, we report a sustainable strategy for scalable-designed and color-regulating PDRC coating based on high-crystallinity photonic metamaterial (crystal... | Materials Science & Metallurgy | https://sinotechintel.com/paper/scalable-designed-photonic-metamaterial-for-color-regulating-passive-daytime-radiative-cooling |
54 | Ion-Mediated Carbon Microdomain Engineering Boosting Enhanced Plateau Capacity of Carbon Anode under High Rate Towards High-Performance Sodium Dual-Ion Batteries | 10.1007/s40820-025-02008-4 | Bin Tang, Yuchen Zhang, Bifa Ji, Geng Yu, Yongping Zheng, Xiaolong Zhou, Nuntaporn Kamonsutthipaijit, Pornsuwan Buangam, Sarayut Tunmee, Hideki Nakajima, Ukit Rittihong, Qingguang Pan, Fan Zhang, Yongbing Tang | Sodium-based dual-ion batteries (SDIBs) have been attracting increasing attention in recent years owing to their low cost, environmental benignancy, and high operating voltage. However, the sluggish ion kinetics of conventional carbon anodes that cannot match the fast capacitive anion intercalation behavior of graphite... | Materials Science & Metallurgy | https://sinotechintel.com/paper/ion-mediated-carbon-microdomain-engineering-boosting-enhanced-plateau-capacity-of-carbon-anode-under-high-rate-towards-high-performance-sodium-dual-ion-batteries |
55 | A Promising Strategy for Solvent-Regulated Selective Hydrogenation of 5-Hydroxymethylfurfural over Porous Carbon-Supported Ni-ZnO Nanoparticles | 10.1007/s40820-025-01847-5 | Rulu Huang, Chao Liu, Kaili Zhang, Jianchun Jiang, Ziqi Tian, Yongming Chai, Kui Wang | Developing biomass platform compounds into high value-added chemicals is a key step in renewable resource utilization. Herein, we report porous carbon-supported Ni-ZnO nanoparticles catalyst (Ni-ZnO/AC) synthesized via low-temperature coprecipitation, exhibiting excellent performance for the selective hydrogenation of ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-promising-strategy-for-solvent-regulated-selective-hydrogenation-of-5-hydroxymethylfurfural-over-porous-carbon-supported-ni-zno-nanoparticles |
56 | Prioritized Na+ Adsorption-Driven Cationic Electrostatic Repulsion Enables Highly Reversible Zinc Anodes at Low Temperatures | 10.1007/s40820-025-01889-9 | Guanchong Mao, Pan Xu, Xin Liu, Xingyu Zhao, Zexiang Shen, Dongliang Chao, Minghua Chen | Aqueous zinc metal batteries (AZMBs) are promising candidates for renewable energy storage, yet their practical deployment in subzero environments remains challenging due to electrolyte freezing and dendritic growth. Although organic additives can enhance the antifreeze properties of electrolytes, their weak polarity d... | Materials Science & Metallurgy | https://sinotechintel.com/paper/prioritized-na-adsorption-driven-cationic-electrostatic-repulsion-enables-highly-reversible-zinc-anodes-at-low-temperatures |
57 | Ultrafast Sulfur Redox Dynamics Enabled by a PPy@N-TiO2 Z-Scheme Heterojunction Photoelectrode for Photo-Assisted Lithium–Sulfur Batteries | 10.1007/s40820-025-01946-3 | Fei Zhao, Yibo He, Xuhong Li, Ke Yang, Shuo Chen, Yuanzhi Jiang, Xue-Sen Wang, Chunyuan Song, Xuqing Liu | Photo-assisted lithium–sulfur batteries (PALSBs) offer an eco-friendly solution to address the issue of sluggish reaction kinetics of conventional LSBs. However, designing an efficient photoelectrode for practical implementation remains a significant challenge. Herein, we construct a free-standing polymer–inorganic hyb... | Materials Science & Metallurgy | https://sinotechintel.com/paper/ultrafast-sulfur-redox-dynamics-enabled-by-a-ppyn-tio2-z-scheme-heterojunction-photoelectrode-for-photo-assisted-lithiumsulfur-batteries |
58 | Nanoreactor-Structured Defective MoS2: Suppressing Intercalation-Induced Phase Transitions and Enhancing Reversibility for Potassium-Ion Batteries | 10.1007/s40820-025-01992-x | Chunrong Ma, Cyrus Koroni, Jiacheng Hu, Ji Qian, Guangshuai Han, Hui Xiong | Conversion-type electrode materials hold significant promise for potassium-ion batteries (PIBs) due to their high theoretical capacities, yet their practical deployment is hindered by sluggish kinetics and irreversible structural degradation. To overcome these limitations, we propose a rationally engineered nanoreactor... | Materials Science & Metallurgy | https://sinotechintel.com/paper/nanoreactor-structured-defective-mos2-suppressing-intercalation-induced-phase-transitions-and-enhancing-reversibility-for-potassium-ion-batteries |
59 | Thermally Drawn Flexible Fiber Sensors: Principles, Materials, Structures, and Applications | 10.1007/s40820-025-01840-y | ZhaoLun Zhang, Yuchang Xue, Pengyu Zhang, Xiao Yang, Xishun Wang, Chunyang Wang, Haisheng Chen, Xinghua Zheng, Xin Yin, Ting Zhang | Flexible fiber sensors, with their excellent wearability and biocompatibility, are essential components of flexible electronics. However, traditional methods face challenges in fabricating low-cost, large-scale fiber sensors. In recent years, the thermal drawing process has rapidly advanced, offering a novel approach t... | Materials Science & Metallurgy | https://sinotechintel.com/paper/thermally-drawn-flexible-fiber-sensors-principles-materials-structures-and-applications |
60 | Tackling Challenges and Exploring Opportunities in Cathode Binder Innovation | 10.1007/s40820-025-01848-4 | Tingrun Lai, Li Wang, Zhibei Liu, Adnan Murad Bhayo, Yude Wang, Xiangming He | Long-life energy storage batteries are integral to energy storage systems and electric vehicles, with lithium-ion batteries (LIBs) currently being the preferred option for extended usage-life energy storage. To further extend the life span of LIBs, it is essential to intensify investments in battery design, manufacturi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/tackling-challenges-and-exploring-opportunities-in-cathode-binder-innovation |
61 | High Heat-fade Resistance, Metal-free Resin-based Brake Pads: A Step towards Replacing Copper by Using Andalusite | 10.1186/s10033-025-01310-x | Kaikui Zheng, Zijing Min, Fawang Zhang, Zhiying Ren, Youxi Lin | The emission of copper-containing particulate matter during braking poses a threat to the natural environment, yet copper plays a crucial role in resin-based brake pads. Developing a copper-free brake pad with high heat-fade resistance has emerged as a significant current topic. This study employs andalusite-filled res... | Materials Science & Metallurgy | https://sinotechintel.com/paper/high-heat-fade-resistance-metal-free-resin-based-brake-pads-a-step-towards-replacing-copper-by-using-andalusite |
62 | A Comprehensive Review of Key Technologies for Robot Motion Planning in Contact Tasks in Industrial Automation Scenarios | 10.1186/s10033-025-01356-x | Shibo Jin, Kaichen Ke, Boyang Gao, Li Fu, Xingrong Huang | With the swift advancement of industrial automation, robots have emerged as an essential component in emerging industries and high-end equipment, thereby propelling industrial production towards greater intelligence and efficiency. This paper reviews the pivotal technologies for motion planning of robots engaged in con... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-comprehensive-review-of-key-technologies-for-robot-motion-planning-in-contact-tasks-in-industrial-automation-scenarios |
63 | A Knowledge Push Method of Complex Product Assembly Process Design Based on Distillation Model-Based Dynamically Enhanced Graph and Bayesian Network | 10.1186/s10033-025-01275-x | Fengque Pei, Yaojie Lin, Jianhua Liu, Cunbo Zhuang, Sikuan Zhai | Under the paradigm of Industry 5.0, intelligent manufacturing transcends mere efficiency enhancement by emphasizing human-machine collaboration, where human expertise plays a central role in assembly processes. Despite advancements in intelligent and digital technologies, assembly process design still heavily relies on... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-knowledge-push-method-of-complex-product-assembly-process-design-based-on-distillation-model-based-dynamically-enhanced-graph-and-bayesian-network |
64 | Research on the Coupling Force between the Grinding Wheel and Rail in Grinding Train System | 10.1186/s10033-025-01328-1 | Tao Liu, Dabin Cui, Xinyi Li, Zhanghong Liu, Li Li | During the grinding train operation process, the grinding force between the grinding wheel and the rail is critical in ensuring the grinding quality and efficiency. The coupling vibration among the frame, the grinding wheels, and the wheelsets will seriously affect the stability of the grinding force. In this paper, th... | Materials Science & Metallurgy | https://sinotechintel.com/paper/research-on-the-coupling-force-between-the-grinding-wheel-and-rail-in-grinding-train-system |
65 | A Multi-Layer Progressive Analysis Method for Collision Energy Flow in Rail Trains | 10.1186/s10033-025-01353-0 | Jingke Zhang, Tao Zhu, Xiaorui Wang, Bing Yang, Shoune Xiao, Guangwu Yang, Yuru Li | The huge impact kinetic energy cannot be quickly dissipated by the energy-absorbing structure and transferred to the other vehicle through the car body structure, which will cause structural damage and threaten the lives of the occupants. Therefore, it is necessary to understand the laws of energy conversion, dissipati... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-multi-layer-progressive-analysis-method-for-collision-energy-flow-in-rail-trains |
66 | Passenger Comfort Assessment via Motion Complexity Analysis for Autonomous Vehicles | 10.1186/s10033-025-01289-5 | Titong Jiang, Jingyuan Li, Liang Ma, Xuewu Ji, Yahui Liu | Traditionally, passenger comfort in vehicles is perceived as being most influenced by acceleration and jerk. Consequently, the current research primarily focuses on developing control algorithms to limit the maximum acceleration and jerk of the vehicle in order to improve passenger comfort. However, naturalistic drivin... | Materials Science & Metallurgy | https://sinotechintel.com/paper/passenger-comfort-assessment-via-motion-complexity-analysis-for-autonomous-vehicles |
67 | Observer-Based Robust Explicit Model Predictive Control for Path Following of Autonomous Electric Vehicles with Communication Delay | 10.1186/s10033-025-01257-z | Jing Zhao, Renbin Li, Mingze Lv, Wenfeng Li, Zhengchao Xie, Pak Kin Wong | The existing research on the path following of the autonomous electric vehicle (AEV) mainly focuses on the path planning and the kinematic control. However, the dynamic control with the state observation and the communication delay is usually ignored, so the path following performance of the AEV cannot be ensured. This... | Materials Science & Metallurgy | https://sinotechintel.com/paper/observer-based-robust-explicit-model-predictive-control-for-path-following-of-autonomous-electric-vehicles-with-communication-delay |
68 | Influence of Fatigue Damage on Collision Response of Metro Vehicles: Simulation and Experimental Study Based on Damage Sequence Interaction Model | 10.1186/s10033-025-01316-5 | Wenyue Yuan, Tao Zhu, Bing Yang, Haoxu Ding, Xiaorui Wang, Quanwei Che, Jingke Zhang, Shoune Xiao, Cheng Lei | This study decouples the material microstructure into matrix and void phases. The undamaged constitutive is derived from the matrix phase, while the void phase contributes to damage evolution. A constitutive model is established by coupling the two. According to the void-phase evolution during damage, a damage sequence... | Materials Science & Metallurgy | https://sinotechintel.com/paper/influence-of-fatigue-damage-on-collision-response-of-metro-vehicles-simulation-and-experimental-study-based-on-damage-sequence-interaction-model |
69 | A DDPG-based Path Following Control Strategy for Autonomous Vehicles by Integrated Imitation Learning and Feedforward Exploration | 10.1186/s10033-025-01336-1 | Qianjie Liu, Peixiang Xiong, Qingyuan Zhu, Wei Xiao, Kejie Wang, Guoliang Hu, Gang Li | Autonomous driving technology is constantly developing to a higher level of complex scenes, and there is a growing demand for the utilization of end-to-end data-driven control. However, the end-to-end path tracking process often encounters challenges in learning efficiency and generalization. To address this issue, thi... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-ddpg-based-path-following-control-strategy-for-autonomous-vehicles-by-integrated-imitation-learning-and-feedforward-exploration |
70 | State of the Art Review on the Crashworthiness of Railway Vehicles | 10.1186/s10033-025-01287-7 | Chao Yang, Luze Zhang, Yujiang Lu, Ning Xu, Yichang Zhou, Qiang Li, Zunsong Ren | The state of the art is reviewed for the crashworthiness of railway vehicles in aspects of materials, energy absorbing structures, train collision simulation and experiments. The recoverable and nonreversible energy absorbers are introduced for railway vehicles first. Metallic and non-metallic materials play a crucial ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/state-of-the-art-review-on-the-crashworthiness-of-railway-vehicles |
71 | Variable Stability Control Approach for Angle Following of Steer-by-wire System | 10.1186/s10033-025-01304-9 | Lin He, Ziang Xu, Yujiang Wei, Shanshan Peng, Huasheng Feng, Qin Shi | It is particularly challenging to develop a new control theory like human intelligence, as human cognition and decision-making are variable in changing environments. In this article, the idea of variable stability is adopted to design a human-like control algorithm, referred to as variable stability control. A variable... | Materials Science & Metallurgy | https://sinotechintel.com/paper/variable-stability-control-approach-for-angle-following-of-steer-by-wire-system |
72 | Aerodynamic characteristics of a 600 km/h high-temperature superconducting maglev train running in open air considering different suspension gaps | 10.1007/s11771-025-6141-x | LI Zong-peng, PAN Yi-ming, WANG Xiao-fei, ZHAO Hong-min, DENG Zi-gang, ZHANG Wei-hua | The suspension gap is a critical operational parameter for high-speed maglev trains and significantly impacts their aerodynamic performance. Based on an engineering prototype of the high-temperature superconducting (HTS) pinning maglev train, this study established a detailed three-dimensional model, and then the aerod... | Materials Science & Metallurgy | https://sinotechintel.com/paper/aerodynamic-characteristics-of-a-600-kmh-high-temperature-superconducting-maglev-train-running-in-open-air-considering-different-suspension-gaps |
73 | Advanced Modeling and Stability Analysis of Electro-Hydraulic Control Modules for Intelligent Chassis Systems | 10.1186/s10033-025-01339-y | Fei Meng, Yanfei Ren, Junqiang Xi | This research presents an advanced study on the modeling and stability analysis of electro-hydraulic control modules used in intelligent chassis systems. Firstly, a comprehensive nonlinear mathematical model of the electro-hydraulic power-shift system is developed, incorporating pipeline characteristics through impedan... | Materials Science & Metallurgy | https://sinotechintel.com/paper/advanced-modeling-and-stability-analysis-of-electro-hydraulic-control-modules-for-intelligent-chassis-systems |
74 | SOTIF-Based Analysis and Design of Control Strategies for Controllable Suspension Systems of Automobiles | 10.1186/s10033-025-01237-3 | Xianxu Bai, Kehe Nie, Haowei Sun, Anding Zhu, Haoxuan Dong, Di Wu | Electronic control suspension (ECS) systems are of significance to ride comfort and handling stability of ground vehicles. However, ECS systems may pose unreasonable safety risks due to performance inadequacies or improper use by drivers, which are referred to as safety of the intended functionality (SOTIF) issues. Aim... | Materials Science & Metallurgy | https://sinotechintel.com/paper/sotif-based-analysis-and-design-of-control-strategies-for-controllable-suspension-systems-of-automobiles |
75 | Mechanical Response and Superelastic Properties of Cu-11.85Al-3.2Mn-0.1Ti TPMS Structures Printed by Laser Powder Bed Fusion | 10.1186/s10033-024-01170-x | Mingzhu Dang, Honghao Xiang, Jingjing Li, Chunsheng Ye, Chao Cai, Qingsong Wei | Triply periodic minimal surfaces (TPMS) are structures with smooth surfaces and excellent energy absorption properties. Combining new functional materials, such as shape memory alloys, with TPMS structures provides a novel and promising research field. In this study, three TPMS structures (Gyroid, Diamond, and Primitiv... | Materials Science & Metallurgy | https://sinotechintel.com/paper/mechanical-response-and-superelastic-properties-of-cu-1185al-32mn-01ti-tpms-structures-printed-by-laser-powder-bed-fusion |
76 | Cutting Force and State Identification in High-Speed Milling: a Semi-Analytical Multi-Dimensional Approach | 10.1186/s10033-024-01171-w | Yu Zhang, Xianyin Duan, Kunpeng Zhu | High-speed milling (HSM) is advantageous for machining high-quality complex-structure surface components with various materials. Identifying and estimating cutting force signals for characterizing HSM is of high significance. However, considering the tool runout and size effects, many proposed models focus on the mater... | Materials Science & Metallurgy | https://sinotechintel.com/paper/cutting-force-and-state-identification-in-high-speed-milling-a-semi-analytical-multi-dimensional-approach |
77 | Inspired by the Adhesive Ability of Drosera and the Stress Envelope Effect Rescue Manipulator | 10.1186/s10033-025-01242-6 | Yanzhi Zhao, Haibo Yu, Changlei Pei, Maoshi Lu, Shijun Huang | The existing research on rescue robots has focused mainly on reconnaissance, detection, and firefighting, and a small number of robots that can achieve human rescue have problems such as poor safety and stability and insufficient carrying capacity. This article addresses the above issues and cleverly combines the advan... | Materials Science & Metallurgy | https://sinotechintel.com/paper/inspired-by-the-adhesive-ability-of-drosera-and-the-stress-envelope-effect-rescue-manipulator |
78 | Corrosion behavior of three nickel-based single-crystal superalloys in mixed Na2SO4 and NaCl molten salts at 700 ℃ | 10.1007/s11771-025-6068-2 | LI Qian-yi, LIU Feng, WANG Zi, ZHAO Yun-xing, TAN Li-ming, HUANG Lan | In this investigation, we examined the high-temperature corrosion behavior of three nickel-based single-crystal superalloys subjected to a mixed molten salt environment of Na2SO4 and NaCl at 700 °C, leading to a preliminary elucidation of their molten salt corrosion mechanisms. By further comparing the corrosion degree... | Materials Science & Metallurgy | https://sinotechintel.com/paper/corrosion-behavior-of-three-nickel-based-single-crystal-superalloys-in-mixed-na2so4-and-nacl-molten-salts-at-700-c |
79 | Recent progress and prospective of zero-dimensional Cs2B(IV)X6 lead-free double perovskite | 10.1007/s11771-025-6066-4 | HU Can, CHEN Qiao-chu, ZENG Guang-sheng, LU Hao-zi, JIANG Tai-jun, CHEN Si-wei, SU Yan, JIANG Ji-zhou, LIU Song, JIANG Jia-liang | The zero-dimensional (0D) ordered lead-free double perovskites (DPs) Cs2B(IV)X6 have recently been recognized as promising candidates in the optoelectronics domain. Their exceptional stability and environmentally benign nature position them as ideal alternatives to their toxic and unstable lead-based halide perovskite ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/recent-progress-and-prospective-of-zero-dimensional-cs2bivx6-lead-free-double-perovskite |
80 | A moving model test of a maglev train passing through tunnels: Effect of train speed and buffer structure on aerodynamic environment | 10.1007/s11771-025-6135-8 | GUO Zi-jian, CHEN Zheng-wei, GUO Zhan-hao, ZENG Guang-zhi, PENG Cheng | Maglev trains experience significant aerodynamic effects when passing through tunnels. A moving model test was conducted to explore the practical effects of speed reduction and entrance buffer structures on mitigating tunnel/maglev aerodynamic effects. It is found that both have an overall positive effect on mitigating... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-moving-model-test-of-a-maglev-train-passing-through-tunnels-effect-of-train-speed-and-buffer-structure-on-aerodynamic-environment |
81 | Lubricant Transport Mechanism and Dynamics Model for Nepenthes-shaped Biomimetic Microtexture | 10.1186/s10033-025-01197-8 | Xiaoming Wang, Min Yang, Teng Gao, Lan Dong, Yusuf Suleiman Dambatta, Xin Liu, Yuying Yang, Qinglong An, Yanbin Zhang, Changhe Li | During the metal cutting process, especially in continuous contact conditions like turning, the challenge of lubricants failing to effectively reach the cutting point remains unresolved. Micro-textured cutting tools offer a potential solution for tool-chip contact challenges. Inspired by the evolutionary achievements o... | Materials Science & Metallurgy | https://sinotechintel.com/paper/lubricant-transport-mechanism-and-dynamics-model-for-nepenthes-shaped-biomimetic-microtexture |
82 | Experimental study and creep constitutive modeling for 2219 aluminum alloy under tension and compression conditions | 10.1007/s11771-025-6123-z | LI Shuang-bo, MAO Xiao-bo, ZHAN Li-hua, YANG You-liang, LIU Chun-hui, ZENG Quan-qing | The creep deformation and mechanical properties of 2219 aluminum alloy were experimentally investigated under both tension and compression at the temperature of 165 ℃ for different time. The results indicated that the creep deformation under tensile stress was greater than that under compressive stress. As the stress l... | Materials Science & Metallurgy | https://sinotechintel.com/paper/experimental-study-and-creep-constitutive-modeling-for-2219-aluminum-alloy-under-tension-and-compression-conditions |
83 | Shear instability identification method and its damage characteristics based on automatic recognition of three-dimensional curvature of limestone joint surfaces | 10.1007/s11771-025-6103-3 | ZHANG Shi-chuan, SONG Shi-long, SHEN Bao-tang, LI Yang-yang | In deep underground engineering construction, the dominant rock failure mode, whether by tension or shear, influences the engineering instability. Therefore, the critical triggering conditions that induce shear or tensile fractures in rocks urgently need further investigation. This paper designs direct shear tests on i... | Materials Science & Metallurgy | https://sinotechintel.com/paper/shear-instability-identification-method-and-its-damage-characteristics-based-on-automatic-recognition-of-three-dimensional-curvature-of-limestone-joint-surfaces |
84 | Prediction of macroscopic abnormally coarse grain during solid solution of Ti-10V-2Fe-3Al alloy based on dynamic recrystallization kinetics | 10.1007/s11771-025-6126-9 | ZHANG Yu-sen, CHEN Lei, GAO Xiao-peng, GUO Cong-de, CAI Xing-zhou, JIN Miao, MA Xiao-cong | After the hot deformation sample of Ti-10V-2Fe-3Al alloy was treated by solid solution in the α+β two-phase region, the coarse β grains that often appeared in the β single phase region were observed in the local region, indicating that the abnormal grain growth occurred in the local microstructural region, and the macr... | Materials Science & Metallurgy | https://sinotechintel.com/paper/prediction-of-macroscopic-abnormally-coarse-grain-during-solid-solution-of-ti-10v-2fe-3al-alloy-based-on-dynamic-recrystallization-kinetics |
85 | A novel non-Hertzian wheel-rail adhesion model under wet conditions considering surface roughness | 10.1007/s11771-025-6091-3 | WU Bing, HUANG Jia-qing, SU Xiang-long | Precise solutions for wheel-rail adhesion are important to the traction and braking of the high-speed trains under wet conditions. Current models predominantly rely on Hertzian contact theory assumptions. The present work proposes a novel non-Hertzian wheel-rail adhesion model to clarify the adhesion mechanisms under w... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-novel-non-hertzian-wheel-rail-adhesion-model-under-wet-conditions-considering-surface-roughness |
86 | Microseismic source location based on multi-sensor arrays and particle swarm optimization algorithm | 10.1007/s11771-025-6059-3 | LIU Ling-hao, SHANG Xue-yi, WANG Yi, LI Xi-bing, FENG Fan | Microseismic (MS) source location plays an important role in MS monitoring. This paper proposes a MS source location method based on particle swarm optimization (PSO) and multi-sensor arrays, where a free weight joints the P-wave first arrival data. This method adaptively adjusts the preference for “superior” arrays an... | Materials Science & Metallurgy | https://sinotechintel.com/paper/microseismic-source-location-based-on-multi-sensor-arrays-and-particle-swarm-optimization-algorithm |
87 | Deformation characteristics and interfacial damage of CRTS II slab track joints under operating temperature conditions | 10.1007/s11771-025-6065-5 | DONG Bo, CHEN Zhi-yuan, ZHU Hao, CAI Xiao-pei, ZHANG Xing, HE Xu | Arching and cracking of joints between slabs have become a problem in China Railway Track System (CRTS) II slab track. The slab track is susceptible to complex temperature variations as a longitudinal continuous structure. Based on measured data, a thermal-mechanical coupling model of the track was established. The def... | Materials Science & Metallurgy | https://sinotechintel.com/paper/deformation-characteristics-and-interfacial-damage-of-crts-ii-slab-track-joints-under-operating-temperature-conditions |
88 | Gear flank modification and precision control based on electronic gearbox | 10.1007/s11771-025-5881-y | TIAN Xiao-qing, LU Yi-guo, YOU Tong-fei, TANG Jian-ping, RUI Xiao-yu, LI Guang-hui, XIA Lian, HAN Jiang | Gear flank modification is essential to reduce the noise generated in the gear meshing process, improve the gear transmission performance, and reduce the meshing impact. Aiming at the problem of solving the additional motions of each axis in the higher-order topology modification technique and how to accurately add the... | Materials Science & Metallurgy | https://sinotechintel.com/paper/gear-flank-modification-and-precision-control-based-on-electronic-gearbox |
89 | A unified analytical model for track deformation mapping and vehicle-track dynamic response induced by substructure deformation | 10.1007/s11771-026-6289-z | CHEN Yao, FENG Qing-song, ZHAO Lei, ZHANG Ling, YANG Zhou | This study establishes a nonlinear vehicle-track coupled dynamic model that explicitly accounts for the effects of substructure deformation. Based on the vehicle-track coupled dynamics framework, the track structure is modeled using an energy-based approach, in which displacement functions of track layers are expanded ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-unified-analytical-model-for-track-deformation-mapping-and-vehicle-track-dynamic-response-induced-by-substructure-deformation |
90 | Mechanism and application of a new method for roof cutting and pressure relief with dense drilling | 10.1007/s11771-026-6168-7 | FU Qiang, YANG Jun, GAO Yu-bing, LI Chang-jiang, LIU Yu-xuan, JIANG Han-ze, ZHOU Jian-lin, WU Xing | With the continual deterioration of mining conditions, the deformation and failure of surrounding rock in roadways with weak roofs under intense mine pressure during close-distance coal seam extraction has become a critical issue restricting the safe and efficient mining of coal. To address the issue of increased surro... | Materials Science & Metallurgy | https://sinotechintel.com/paper/mechanism-and-application-of-a-new-method-for-roof-cutting-and-pressure-relief-with-dense-drilling |
91 | Numerical simulation of wheel-rail rolling contact fatigue considering yaw angle and interfacial conditions | 10.1007/s11771-026-6210-9 | LI Ding-kang, WU Bing, WANG Zhao-yang, LI Ji-peng, ZUO Jian-yong | The accuracy of wheel-rail rolling contact force is of great significance for vehicle dynamics simulation. A wheel-rail rolling contact behavior model considering wheelset yaw is proposed. The NORM algorithm is adopted to solve the wheel-rail normal contact problem. The extended creep force model (ECF) is used for the ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/numerical-simulation-of-wheel-rail-rolling-contact-fatigue-considering-yaw-angle-and-interfacial-conditions |
92 | Chemistry and potential applications of multifunctional polymer nanocomposite coatings: A review | 10.1007/s11771-025-6102-4 | A.M. FADL | Polymer nanocomposite coatings (PNCCs) are unprecedented generation of coatings engineered for displaying inexpensive and brilliant functional surface coatings with eminent corrosion guard, mechanical resistance, antimicrobial, chemical durability, electrical insulation, and UV aging features. Due to their widely antic... | Materials Science & Metallurgy | https://sinotechintel.com/paper/chemistry-and-potential-applications-of-multifunctional-polymer-nanocomposite-coatings-a-review |
93 | Microstructure and the corrosion resistance of SiC reinforced pyrolytic graphite coating under physical vapor transport SiC environment | 10.1007/s11771-026-6166-9 | TAO Xian-cheng, SUN Wei, SUN Ye-hua, DENG Nan-jun, WANG Zi-wei, XIONG Xiang | In order to effectively prevent the contamination of carbon particle volatiles during high-purity SiC crystals are prepared using the physical vapor transport (PVT) method in ultra-high temperature environments (T≥2000 ℃), this study innovatively attempts to protect graphite materials with SiC reinforced pyrolytic grap... | Materials Science & Metallurgy | https://sinotechintel.com/paper/microstructure-and-the-corrosion-resistance-of-sic-reinforced-pyrolytic-graphite-coating-under-physical-vapor-transport-sic-environment |
94 | Transformation of strain energy increment in catastrophe model and its application to stability analysis of host rock in nuclear waste disposal caverns | 10.1007/s11771-026-6266-6 | ZHANG Rui-xin, ZHANG Qiang-yong, LIU Chuan-cheng, DUAN Kang, WEN Zhi-jie, SUN Xi-kui, WANG Peng-fei | To reduce the subjectivity of conventional instability criteria in deep rock engineering, this study develops an energy-driven criterion grounded in cusp catastrophe theory and embeds it within an improved nonlinear Hoek-Brown (H-B) strength-reduction framework. We derive an explicit algebraic transformation that maps ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/transformation-of-strain-energy-increment-in-catastrophe-model-and-its-application-to-stability-analysis-of-host-rock-in-nuclear-waste-disposal-caverns |
95 | The influence of microwave irradiation on thermal properties and fracturing mechanism of basalt in rock excavation | 10.1007/s11771-026-6162-0 | TANG Rui-feng, YANG Ben-gao, XIE Jing, YANG Zhu, YANG Zun-dong, BAI Yan-bo, GAO Ming-zhong | Microwave fracturing is a promising technique for facilitating the efficient exploitation of deep earth resources while reducing energy consumption and cutter wear during mechanical excavation. In this study, the thermal properties of basalt under six power levels are investigated and the mechanism of microwave fractur... | Materials Science & Metallurgy | https://sinotechintel.com/paper/the-influence-of-microwave-irradiation-on-thermal-properties-and-fracturing-mechanism-of-basalt-in-rock-excavation |
96 | A dual-component strategy for ambiently-cured high-toughness red mud-based geopolymer: Modified nano-TiO2 and sodium polyacrylate | 10.1007/s11771-026-6257-7 | CHEN Jing, BAI Bing, NIE Qing-ke, BAI Fan, ZHANG Hai-qing | In response to the growing demand for sustainable construction materials, this study overcomes the inherent brittleness and poor fracture resistance of red mud-based geopolymer (RBG) through the strategic combination of surface-modified nano-TiO2 (NT) and sodium polyacrylate (SPA). The NT was functionalized with silane... | Materials Science & Metallurgy | https://sinotechintel.com/paper/a-dual-component-strategy-for-ambiently-cured-high-toughness-red-mud-based-geopolymer-modified-nano-tio2-and-sodium-polyacrylate |
97 | An acid-free process for the selective recovery of lithium from spent ternary lithium-ion batteries | 10.1007/s11771-026-6187-4 | ZHANG Kun, YANG Jian, JIANG Liang-xing, LAI Yan-qing, XU Kai-hua | With the dramatic accumulation of the end-of-life lithium-ion batteries, their recycling is attracting extensive attention worldwide. To address the problem of low lithium recovery in the current typical hydrometallurgy recovery process, this research uses sodium bisulfate as an auxiliary roasting reagent to extract li... | Materials Science & Metallurgy | https://sinotechintel.com/paper/an-acid-free-process-for-the-selective-recovery-of-lithium-from-spent-ternary-lithium-ion-batteries |
98 | Effects of deep cryogenic treatment on microstructures, mechanical properties and dimensional stability of beryllium for inertial devices | 10.1007/s11771-026-6204-7 | REN Peng-he, XIAO Lai-rong, ZHAO Xiao-jun, CAI Zhen-yang | This study investigated the effects of deep cryogenic treatment (DCT) on hot isostatic pressed (HIP) beryllium for inertial devices, focusing on residual stress, microstructure, tensile properties, and dimensional stability. The findings revealed that during DCT, residual stress in beryllium increased gradually due to ... | Materials Science & Metallurgy | https://sinotechintel.com/paper/effects-of-deep-cryogenic-treatment-on-microstructures-mechanical-properties-and-dimensional-stability-of-beryllium-for-inertial-devices |
99 | Effect of loading rate on the brittleness index of granite: An experimental investigation | 10.1007/s11771-026-6238-x | YIN Tu-bing, LIU Fan, MA Jie-xin, DAI Hao, LU Jian-fei, GUO Wen-xuan, LI Xi-bing | In deep underground engineering, rock brittleness is closely associated with rockburst and feasibility of hydraulic fracturing. The loading rate plays a crucial role in determining the severity of rockburst and cuttability. By conducting uniaxial compression tests and single-cycle loading-unloading experiments, the bri... | Materials Science & Metallurgy | https://sinotechintel.com/paper/effect-of-loading-rate-on-the-brittleness-index-of-granite-an-experimental-investigation |
100 | Heating and fracture spatiotemporal evolution characteristics of key granite minerals under microwave irradiation | 10.1007/s11771-026-6207-4 | BAI Yan-bo, YANG Ben-gao, WANG Jing-yu, XIE Jing, TANG Rui-feng, GAO Ming-zhong, YUAN Liang | Microwave fracturing offers significant potential for efficient hard rock fragmentation. This study investigates real-time heating and fracture characteristics of ten granitoid minerals under 2 kW microwave irradiation for 3 min. Chlorite, amphibole, and altered plagioclase were identified as highly microwave-sensitive... | Materials Science & Metallurgy | https://sinotechintel.com/paper/heating-and-fracture-spatiotemporal-evolution-characteristics-of-key-granite-minerals-under-microwave-irradiation |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.