NYU-MLDA_OpenABC/bench_rtl/src/jpeg/jpeg_rzs.v

/////////////////////////////////////////////////////////////////////
////                                                             ////
////  JPEG Run-Length Encoder, remove zero sequences             ////
////                                                             ////
////  - Detect (15,0) (0,0) seqence                              ////
////  - Replace them by (0,0)                                    ////
////                                                             ////
////  Author: Richard Herveille                                  ////
////          richard@asics.ws                                   ////
////          www.asics.ws                                       ////
////                                                             ////
/////////////////////////////////////////////////////////////////////
////                                                             ////
//// Copyright (C) 2001 Richard Herveille                        ////
////                    richard@asics.ws                         ////
////                                                             ////
//// This source file may be used and distributed without        ////
//// restriction provided that this copyright statement is not   ////
//// removed from the file and that any derivative work contains ////
//// the original copyright notice and the associated disclaimer.////
////                                                             ////
////     THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY     ////
//// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED   ////
//// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS   ////
//// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR      ////
//// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,         ////
//// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES    ////
//// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE   ////
//// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR        ////
//// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  ////
//// LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT  ////
//// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  ////
//// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE         ////
//// POSSIBILITY OF SUCH DAMAGE.                                 ////
////                                                             ////
/////////////////////////////////////////////////////////////////////

//  CVS Log
//
//  $Id: jpeg_rzs.v,v 1.4 2002-10-31 12:53:39 rherveille Exp $
//
//  $Date: 2002-10-31 12:53:39 $
//  $Revision: 1.4 $
//  $Author: rherveille $
//  $Locker:  $
//  $State: Exp $
//
// Change History:
//               $Log: not supported by cvs2svn $
//               Revision 1.3  2002/10/23 18:58:54  rherveille
//               Fixed a bug in the zero-run (run-length-coder)
//
//               Revision 1.2  2002/10/23 09:07:04  rherveille
//               Improved many files.
//               Fixed some bugs in Run-Length-Encoder.
//               Removed dependency on ud_cnt and ro_cnt.
//               Started (Motion)JPEG hardware encoder project.
//

`ifdef SIMULATION
`include "timescale.v"
`endif

module jpeg_rzs(clk, ena, rst, deni, dci, rleni, sizei, ampi, deno, dco, rleno, sizeo, ampo);

	//
	// inputs & outputs
	//
	input        clk;
	input        ena;
	input        rst;
	input        deni;
	input        dci;
	input [ 3:0] sizei;
	input [ 3:0] rleni;
	input [11:0] ampi;

	output        deno;
	output        dco;
	output [ 3:0] sizeo;
	output [ 3:0] rleno;
	output [11:0] ampo;

	reg        deno, dco;
	reg [ 3:0] sizeo, rleno;
	reg [11:0] ampo;

	//
	// variables
	//

	reg [ 3:0] size;
	reg [ 3:0] rlen;
	reg [11:0] amp;
	reg        den;
	reg        dc;

	wire eob;
	wire zerobl;
	reg  state;

	//
	// module body
	//

	always @(posedge clk)
	  if(ena & deni)
	    begin
	        size <= #1 sizei;
	        rlen <= #1 rleni;
	        amp  <= #1 ampi;
	    end

	always @(posedge clk)
	  if(ena)
	    begin
	        sizeo <= #1 size;
	        rleno <= #1 rlen;
	        ampo  <= #1 amp;

	        dc    <= #1 dci;
	        dco   <= #1 dc;
	    end

	assign zerobl = &rleni &  ~|sizei & deni;
	assign eob    = ~|{rleni, sizei} & deni & ~dci;

	always @(posedge clk or negedge rst)
	  if (!rst)
	     begin
	         state <= #1 1'b0;
	         den   <= #1 1'b0;
	         deno  <= #1 1'b0;
	     end
	  else
	    if(ena)
	      (* full_case, parallel_case *) case (state)
	         1'b0:
	             begin
	                 if (zerobl)
	                    begin
	                        state <= #1 1'b1; // go to zero-detection state
	                        den   <= #1 1'b0; // do not yet set data output enable
	                        deno  <= #1 den;  // output previous data
	                    end
	                 else
	                    begin
	                        state <= #1 1'b0; // stay in 'normal' state
	                        den   <= #1 deni; // set data output enable
	                        deno  <= #1 den;  // output previous data
	                    end
	             end

	         1'b1:
	             begin
	                 deno <= #1 1'b0;

	                 if (deni)
	                    if (zerobl)
	                       begin
	                           state <= #1 1'b1; // stay in zero-detection state
	                           den   <= #1 1'b0; // hold current zer-block
	                           deno  <= #1 1'b1; // output previous zero-block
	                       end
	                    else if (eob)
	                       begin
	                           state <= #1 1'b0; // go to 'normal' state
	                           den   <= #1 1'b1; // set output enable for EOB
	                           deno  <= #1 1'b0; // (was already zero), maybe optimize ??
	                       end
	                    else
	                       begin
	                           state <= #1 1'b0; // go to normal state
	                           den   <= #1 1'b1; // set data output enable
	                           deno  <= #1 1'b1; // oops, zero-block should have been output
	                       end
	             end
	      endcase
endmodule